AOC Q27G4XF User Manual
AOC GAMING
Safety
National Conventions
This section describes national conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
✔️ Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer's instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor.
To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:
Installed with stand
Ensure at least 12 inches (30cm) clearance above and 4 inches (10cm) on the sides and rear for adequate ventilation.
Cleaning
Clean the cabinet regularly with a water-dampened, soft cloth.
When cleaning use a soft cotton or microfiber cloth. The cloth should be damp and almost dry; do not allow liquid into the case.
Please disconnect the power cord before cleaning the product.
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
The power cords shall be safety approved. For Germany, it shall be H03VV-F, 3G, 0.75 mm², or better. For other countries, the suitable types shall be used accordingly.
Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level.
Setup
Contents in Box
- Monitor
- Quick Start Guide
- Warranty Card
- Stand
- Base
- Power Cable
- HDMI Cable
- DP Cable
Note: Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Set-up Stand & Base
Please setup or remove the base following the steps as below.
Setup
Describe the steps for attaching the stand, involving aligning parts and tightening screws.
Remove
Describe the steps for removing the stand, involving releasing locking mechanisms and unscrewing parts.
NOTE: Display design may differ from those illustrated.
Adjusting Viewing Angle
To achieve the best viewing experience, it is recommended that the user can make sure they are able to look at their whole face on the screen, then adjust the monitor's angle based on personal preference. Hold the stand so you will not topple the monitor when you change the monitor's angle.
You are able to adjust the monitor as below:
- Tilt: Approximately -5 degrees downward to 23 degrees upward.
- Swivel: Approximately 30 degrees left and right.
- Height Adjustment: Up to 130mm.
NOTE: Do not touch the LCD screen when you change the angle. Touching the LCD screen may cause damage.
Warning: To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
- DisplayPort
- HDMI
- Earphone
- Power
Connect to PC
- Connect the power cord to the back of the display firmly.
- Turn off your computer and unplug its power cable.
- Connect the display signal cable to the video connector on the back of your computer.
- Plug the power cord of your computer and your display into a nearby outlet.
- Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer to Troubleshoot.
To protect equipment, always turn off the PC and LCD monitor before connecting.
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps:
- Remove the base.
- Follow the manufacturer's instructions to assemble the wall mounting arm.
- Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.
- Insert the 4 screws into the holes and tighten.
- Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall.
Specification of wall hanger screws: M4*(10+X)mm (X=Thickness of Wall mount bracket)
Note: VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. Always contact manufacturer for wall-mount installation.
WARNING:
- To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
- Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
G-SYNC Compatible function
- G-SYNC Compatible function is works with DP.
- To enjoy the perfect gaming experience with G-SYNC, you need to purchase a Separate NVIDIA GPU card that supports G-SYNC.
G-sync system requirements
Desktop computer connected to G-SYNC monitor:
Graphics cards supported: G-SYNC features require NVIDIA GeForce® GTX 650 Ti BOOST or higher graphics cards.
Driver: R340.52 or later
Operating system: Windows 11, Windows 10, Windows 8.1, Windows 7
System requirements: DisplayPort 1.2 of the GPU must be supported.
Notebook computer connected to G-SYNC monitor:
Supported graphics cards: NVIDIA GeForce® GTX 980M, GTX 970M, GTX 965M GPU or higher graphics cards
Driver: R340.52 or higher
Operating system: Windows 11, Windows 10, Windows 8.1, Windows 7
System requirements: DisplayPort 1.2 driven directly from the GPU must be supported.
For more information about NVIDIA G-Sync, please visit: https://www.nvidia.com/en-us/support
Adaptive-Sync function
- Adaptive-Sync function works with DP/HDMI
- Compatible Graphics Card: Recommended list is as below, also could be checked by visiting www.AMD.com
Graphics Cards
- Radeon™ RX Vega series
- Radeon™ RX 500 series
- Radeon™ RX 400 series
- Radeon™ R9/R7 300 series (R9 370/X, R7 370/X, R7 265 except)
- Radeon™ Pro Duo (2016)
- Radeon™ R9 Nano series
- Radeon™ R9 Fury series
- Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)
Processors
- AMD Ryzen™ 7 2700U
- AMD Ryzen™ 5 2500U
- AMD Ryzen™ 5 2400G
- AMD Ryzen™ 3 2300U
- AMD Ryzen™ 3 2200G
- AMD PRO A12-9800
- AMD PRO A12-9800E
- AMD PRO A10-9700
- AMD PRO A10-9700E
- AMD PRO A8-9600
- AMD PRO A6-9500
- AMD PRO A6-9500E
- AMD PRO A12-8870
- AMD PRO A12-8870E
- AMD PRO A10-8770
- AMD PRO A10-8770E
- AMD PRO A10-8750B
- AMD PRO A8-8650B
- AMD PRO A6-8570
- AMD PRO A6-8570E
- AMD PRO A4-8350B
- AMD A10-7890K
- AMD A10-7870K
- AMD A10-7850K
- AMD A10-7800
- AMD A10-7700K
- AMD A8-7670K
- AMD A8-7650K
- AMD A8-7600
- AMD A6-7400K
HDR
It is compatible with input signals in HDR10 format. The display may automatically activate the HDR function if the player and content are compatible. Please contact the device manufacturer and the content provider for information on the compatibility of your device and content. Please select "OFF" for the HDR function when you have no need for automatical activation function.
Note:
- No special setting is needed for the DisplayPort/HDMI interface in WIN10 versions lower (older) than V1703.
- Only the HDMI interface is available and the DisplayPort interface cannot function in WIN10 version V1703.
- 3840x2160 only suggest for Blu-ray Player, Xbox and PlayStation.
a. The display resolution is set to 2560*1440, and HDR is preset to ON.
b. After entering an application, the best HDR effect can be achieved when the resolution is changed to 2560*1440 (if available).
Adjusting
Hotkeys
The monitor features several hotkeys for quick access to functions:
| Button | Function |
|---|---|
| 1. Source/Exit | Selects input source or exits the OSD menu. |
| 2. Gaming Mode | Opens the Gaming Mode function. |
| 3. Dial Point | Shows/hides the Dial Point aiming indicator. |
| 4. Menu/Enter | Displays the OSD or confirms a selection. |
| 5. Power | Turns the monitor on or off. |
Menu/Enter: Press to display the OSD or confirm the selection.
Power: Press the Power button to turn on the monitor.
Dial Point: When there is no OSD, press Dial Point button to show / hide Dial Point.
Gaming Mode: When there is no OSD, press the "√" key to open Gaming mode function, then press "v" or "^" key to select Gaming mode (Standard, FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) based on the different game types.
Source/Exit: When the OSD is closed, press Source/Exit button for Source hot key function. When the OSD menu is active, this button acts as an exit key (to exit the OSD menu).
OSD Setting
Basic and simple instruction on the control keys.
1. Press the MENU-button to activate the OSD window.
2. Press navigation buttons (e.g., Up/Down, Left/Right) to navigate through the functions. Once the desired function is highlighted, press the MENU-button / OK to activate it. Press navigation buttons again to navigate through the sub-menu functions. Once the desired sub-menu function is highlighted, press MENU-button / OK to activate it.
3. Press navigation buttons to change the settings of the selected function. Press Exit to exit. If you want to adjust any other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then press the power button to turn the monitor on. To unlock the OSD, press and hold the MENU-button while the monitor is off and then press the power button to turn the monitor on.
Notes:
- If the product has only one signal input, the item of "Input Select" is unable to be adjusted.
- If the input signal resolution is the native resolution or Adaptive-Sync/G-SYNC, then the item "Image Ratio" is invalid.
Game Setting
| Setting | Options | Description |
|---|---|---|
| Standard | N/A | Enhance readability for suitable web and mobile games. |
| FPS | N/A | For playing FPS (first Person Shooters) games. Improves black level in dark theme. |
| RTS | N/A | For playing RTS (Real Time Strategy) games. Improves the image quality. |
| Racing | N/A | For playing Racing games, provides fastest response time and high color saturation. |
| Gamer 1 | User's preference settings | User's preference settings saved as Gamer 1. |
| Gamer 2 | User's preference settings | User's preference settings saved as Gamer 2. |
| Gamer 3 | User's preference settings | User's preference settings saved as Gamer 3. |
| Shadow Control | 0 - 20 | Shadow Control Default is 0; adjust from 0 to 20 to increase for a clearer picture. If the picture is too dark, adjust from 0 to 20 for better detail visibility. |
| Low Input Lag | Off / On | Turn off frame buffer to decrease input lag. |
| Game Color | 0 - 20 | Adjust saturation from 0-20 for a better picture. |
| G-SYNC | Off / On | Disable or Enable Adaptive-Sync/G-SYNC. Note: When Adaptive-Sync/G-SYNC is enabled, there may be flashing in some game environments. |
| Dial Point | Off / On / Dynamic | Places an aiming indicator in the center of the screen for precise aiming in FPS games. |
| Sniper Scope | Off / 1 / 1.5 / 2.0 | Zoom in locally to make it easier to target when shooting. |
| MBR (Motion Blur Reduction) | 0 - 20 | Provides 0-20 levels of adjustments to reduce motion blur. |
Note:
- The MBR function can be adjusted when Adaptive-Sync/G-SYNC is turned off, and the refresh rate is ≥75Hz.
- The brightness of the screen will decrease as the adjustment value increases.
MBR Sync
MBR Sync: Off / On. Disable or Enable MBR Sync (Motion Blur Remove). Note: The MBR Sync function can be adjusted when Adaptive-Sync/G-SYNC is turned On, and the refresh rate ≥75Hz.
Overdrive
Adjust the response time. Options: Normal, Fast, Faster, Fastest, Extreme.
Note:
- If the user adjusts OverDrive to "Fastest", the displayed image may be blurred. Users can adjust the OverDrive level or turn it off according to their preferences.
- The "Extreme" function is optional when Adaptive-Sync/G-SYNC is turned off, and the refresh rate is ≥75Hz.
- The screen brightness will decrease when the "Extreme" function is turned on.
Frame Counter
Display V frequency on the corner selected. Options: Off / Right-up / Right-Down / Left-Up / Left-Down.
Note:
- When "HDR Mode" under "Picture" is enabled, the items "Gaming Mode", "Shadow Control", "Game Color" cannot be adjusted.
- When "HDR" under "Picture" is enabled, the items "Gaming Mode", "Shadow Control", "Game Color", "MBR" and "MBR Sync" cannot be adjusted. "Extreme" under "Overdrive" is not available.
- When the "Color Space" under "Picture" is set to sRGB, the items "Shadow Control" and "Game Color" cannot be adjusted.
Picture
Adjustments for Picture settings:
| Setting | Range/Options | Description |
|---|---|---|
| Brightness | 0-100 | Backlight Adjustment. |
| Contrast | 0-100 | Contrast from Digital-register. |
| Dark Boost | Off / Level 1 / Level 2 / Level 3 | Enhance the screen details in the dark or bright area to adjust the brightness in the bright area and ensure that it is not oversaturated. |
| Gamma | 1.8 / 2.0 / 2.2 / 2.4 / 2.6 | Adjust Gamma. |
| Eco Adjustment | Standard, Text, Internet, Game, Movie, Sports, Reading | Standard Mode, Text Mode, Internet Mode, Game Mode, Movie Mode, Sports Mode, Reading Mode. |
| Color Temp. | Warm, Normal, Cool, User | Recall Warm Color Temperature from EEPROM, Recall Normal Color Temperature from EEPROM, Recall Cool Color Temperature from EEPROM, Restore Color Temperature from EEPROM. |
| Red | 0-100 | Red gain from Digital-register. |
| Green | 0-100 | Green gain from Digital-register. |
| Blue | 0-100 | Blue gain from Digital-register. |
HDR
Set the HDR profile according to your usage requirements. Note: When HDR is detected, the HDR option is displayed for adjustment.
- DisplayHDR
- HDR Picture
- HDR Movie
- HDR Game
HDR Mode
Optimized for the color and contrast of the picture, which will simulate showing the HDR effect. Note: When HDR is not detected, the HDR Mode option is displayed for adjustment.
- Off
- HDR Picture
- HDR Movie
- HDR Game
DCR
Disable dynamic contrast ratio.
- Off
- On
Color Space
Standard color space panel.
- Panel Native
- sRGB
LowBlue Mode
Decrease blue light wave by controlling color temperature.
- Off
- Multimedia
- Internet
- Office
- Reading
Image Ratio
Select image ratio for display.
- Full / Aspect / 1:1 / 17" (4:3) / 19" (4:3) / 19" (5:4) / 19"W (16:10) / 21.5"W (16:9) / 22"W (16:10) / 23"W (16:9) / 23.6"W (16:9) / 24"W (16:9)
Note:
- When "HDR" is enabled, all items except "HDR" and "Image Ratio" under "Picture" cannot be adjusted.
- When "HDR Mode" is enabled, all items except "HDR Mode", "Brightness", "DCR", "Image Ratio" cannot be adjusted.
- When the "Color Space" is set to sRGB, all items except "Color Space", "Brightness", "DCR", "Image Ratio" cannot be adjusted.
- When the "Eco Adjustment" is set to Reading, "Contrast", "Color Temp", "DCR", "Color Space", "Low blue mode" cannot be adjusted.
Settings
Adjustments for Settings menu:
| Setting | Options | Description |
|---|---|---|
| Language | Selectable languages | Select the OSD language. |
| Input Select | Auto / HDMI / DP | Select Input Signal Source. |
| Break Reminder | Off / On | Break reminder if the user continuously works for more than 1 hour. |
| Off Timer | 0-24 hrs | Select DC off time. |
| DDC/CI | No / Yes | Turn On/Off DDC/CI Support. |
| Reset | No / Yes | Reset the menu to default. |
Audio
Adjustments for Audio settings:
| Setting | Range/Options | Description |
|---|---|---|
| Volume | 0-100 | Volume Adjustment. |
| Mute | Off / On | Mute the volume. |
OSD Setup
Adjustments for OSD Setup menu:
| Setting | Range/Options | Description |
|---|---|---|
| Transparency | 0-100 | Adjust the transparency of OSD. |
| H. Position | 0-100 | Adjust the horizontal position of OSD. |
| V. Position | 0-100 | Adjust the vertical position of OSD. |
| Timeout | 5-120 | Adjust the OSD Timeout. |
Information
View monitor information:
| Information Item | Value |
|---|---|
| Model Name | Q27G4XF |
| Resolution | 2560(H)x1440(V) |
| Refresh Rate | 60Hz |
| HDR | SDR |
| Sync | G-SYNC Compatible/Adaptive-Sync |
| Firmware Date | XXXXXXXX |
| Serial Number | XXXXXXXXXXXXX |
LED Indicator
Status of the power LED:
| Status | LED Color |
|---|---|
| Full Power Mode | White |
| Active-off Mode | Orange |
Troubleshoot
Common problems and their solutions:
| Problem & Question | Possible Solutions |
|---|---|
| Power LED Is Not ON | Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. Check the power cord connection and power supply. |
| No image on the screen | Check the video cable connection (HDMI or DP). If the power is on, reboot the computer. If the initial screen appears, boot in safe mode and change video card frequency. If the initial screen does not appear, contact the Service Center. Check for "Input Not Supported" message; adjust resolution and frequency. Ensure AOC Monitor Drivers are installed. |
| Picture Is Fuzzy & Has Ghosting Shadowing Problem | Adjust the Contrast and Brightness Controls. Press hot-key (AUTO) to auto-adjust. |
| Picture Bounces, Flickers Or Wave Pattern Appears In The Picture | Ensure you are not using an extension cable or switch box; plug directly into the video card output. Move electrical devices causing interference away from the monitor. Use the maximum refresh rate your monitor is capable of at the resolution you are using. |
| Monitor Is Stuck In Active Off-Mode" | The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is properly connected to the computer and that no pins are bent. Check computer functionality by observing the CAPS LOCK LED. |
| Missing one of the primary colors (RED, GREEN, or BLUE) | Inspect the monitor's video cable and ensure no pin is damaged or bent. Make sure the monitor's video cable is properly connected to the computer. |
| Screen image is not centered or sized properly | Adjust H-Position and V-Position or press hot-key (AUTO). |
| Picture has color defects (white does not look white) | Adjust RGB color or select desired color temperature. |
| Horizontal or vertical disturbances on the screen | Use Windows 7/8/10/11 shut-down mode to adjust CLOCK and FOCUS. Press hot-key (AUTO) to auto-adjust. |
| Regulation & Service | Please refer to Regulation & Service Information which is in the CD manual or www.aoc.com (to find the model you purchase in your country and to find Regulation & Service Information in Support page. |
Specification
General Specification
| Category | Specification | Details |
|---|---|---|
| Panel | Model name | Q27G4XF |
| Driving system | TFT Color LCD | |
| Viewable Image Size | 68.5 cm diagonal | |
| Pixel pitch | 0.2331mm(H) x 0.2331mm(V) | |
| Video | Interface | HDMI Interface & DP Interface |
| Display Color | 16.7M Colors [1] | |
| Horizontal scan range | 30k-230kHz(HDMI), 30k-280kHz(DP) | |
| Horizontal scan Size(Maximum) | 596.736mm | |
| Vertical scan range | 48-144Hz(HDMI), 48-180Hz(DP) | |
| Vertical Scan Size(Maximum) | 335.664mm | |
| Others | Optimal preset resolution | 2560X1440@60Hz |
| Max resolution | 2560X1440@144HZ(HDMI), 2560X1440@180HZ(DP) | |
| Plug & Play | VESA DDC2B/CI | |
| Power Source | 100-240V~, 50/60Hz, 1.5A | |
| Power Consumption | Typical(default brightness and contrast): 23W, Max. (brightness = 100, contrast =100): ≤49W | |
| Standby Mode | ≤0.5W | |
| Physical Characteristics | Connector Type | HDMI/DP/Earphone out |
| Signal Cable Type | Detachable | |
| Environmental | Temperature | Operating: 0°C~40°C, Non-Operating: -25°C~55°C |
| Humidity | Operating: 10%~85% (Non-Condensing), Non-Operating: 5%~93% (Non-Condensing) | |
| Altitude | Operating: 0m~5000m (0ft~16404ft), Non-Operating: 0m~12192m (0ft~40000ft) |
[1] Note: The maximum number of display colors supported by this product is 1.07 billion, and the setting conditions are as follows (there may be differences due to the output limitation of some graphics cards):
| Signal Version | Color Bit | State | Color Format | HDMI 2.0 | DP 1.4 |
|---|---|---|---|---|---|
| YCbCr422 | NA | NA | |||
| YCbCr444 | OK | OK | |||
| YCbCr420 | OK | OK | |||
| RGB | OK | OK | |||
| 2560x1440@180Hz 10 bit | 10 bit | NA | NA | ||
| 2560x1440@180Hz 8bit | 8 bit | NA | NA | ||
| 2560x1440@170Hz 10 bit | 10 bit | NA | NA | ||
| 2560x1440@170Hz 8bit | 8 bit | NA | NA | ||
| 2560x1440@165Hz 10 bit | 10 bit | NA | NA | ||
| 2560x1440@165Hz 8bit | 8 bit | NA | NA | ||
| 2560x1440@144Hz 10 bit | 10 bit | OK | NA | ||
| 2560x1440@144Hz 8 bit | 8 bit | OK | OK | ||
| 2560x1440@120Hz 10 bit | 10 bit | OK | NA | ||
| 2560x1440@120Hz 8 bit | 8 bit | OK | OK | ||
| 2560x1440@100Hz 10 bit | 10 bit | OK | OK | ||
| 2560x1440@100Hz 8 bit | 8 bit | OK | OK | ||
| 2560x1440@60Hz 10 bit | 10 bit | OK | OK | ||
| 2560x1440@60Hz 8 bit | 8 bit | OK | OK |
Preset Display Modes
| STANDARD | RESOLUTION(±1Hz) | HORIZONTAL FREQUENCY(KHz) | VERTICAL FREQUENCY(Hz) |
|---|---|---|---|
| VGA | 640x480@60Hz | 31.469 | 59.94 |
| 640x480@72Hz | 37.861 | 72.809 | |
| 640x480@75Hz | 37.5 | 75 | |
| 640x480@100Hz | 50.313 | 99.826 | |
| 640x480@120Hz | 60.938 | 119.72 | |
| SVGA | 800x600@56Hz | 35.156 | 56.25 |
| 800x600@60Hz | 37.879 | 60.317 | |
| 800x600@72Hz | 48.077 | 72.188 | |
| 800x600@75Hz | 46.875 | 75 | |
| 800x600@100Hz | 62.76 | 99.778 | |
| 800x600@120Hz | 76.302 | 119.972 | |
| XGA | 1024x768@60Hz | 48.363 | 60.004 |
| 1024x768@70Hz | 56.476 | 70.069 | |
| 1024x768@75Hz | 60.023 | 75.029 | |
| 1024x768@100Hz | 80.448 | 99.811 | |
| 1024x768@120Hz | 97.551 | 119.989 | |
| SXGA | 1280x1024@60Hz | 63.981 | 60.02 |
| 1280x1024@75Hz | 79.976 | 75.025 | |
| FHD | 1920x1080@60Hz | 67.5 | 60 |
| 1920x1080@120Hz | 139.1 | 119.93 | |
| QHD | 2560x1440@60Hz | 88.787 | 59.951 |
| 2560x1440@120Hz | 182.996 | 119.998 | |
| 2560x1440@144Hz | 222.056 | 143.912 | |
| QHD(DP) | 2560x1440@165Hz | 242.55 | 165 |
| 2560x1440@170Hz | 249.9 | 170.001 | |
| 2560x1440@180Hz | 264.603 | 180.002 | |
| DOS | 720x400@70Hz | 31.469 | 70.087 |
| VGA | 640x480@67Hz | 35 | 66.667 |
| SVGA | 832x624@75Hz | 49.725 | 74.551 |
| XGA | 1024x768@75Hz | 60.241 | 74.927 |
Note: According to the VESA standard, there may be a certain error (+/-1Hz) when calculating the refresh rate (field frequency) of different operating systems and graphics cards. In order to improve compatibility, the nominal refresh rate of this product has been rounded off. Please refer to the actual product.
Pin Assignments
19-Pin Color Display Signal Cable
| Pin No. | Signal Name | Pin No. | Signal Name | Pin No. | Signal Name |
|---|---|---|---|---|---|
| 1. | TMDS Data 2+ | 9. | TMDS Data 0- | 17. | DDC/CEC Ground |
| 2. | TMDS Data 2 Shield | 10. | TMDS Clock + | 18. | +5V Power |
| 3. | TMDS Data 2- | 11. | TMDS Clock Shield | 19. | Hot Plug Detect |
| 4. | TMDS Data 1+ | 12. | TMDS Clock- | ||
| 5. | TMDS Data 1Shield | 13. | CEC | ||
| 6. | TMDS Data 1- | 14. | Reserved (N.C. on device) | ||
| 7. | TMDS Data 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Shield | 16. | SDA |
20-Pin Color Display Signal Cable
| Pin No. | Signal Name | Pin No. | Signal Name |
|---|---|---|---|
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | CONFIG1 |
| 4 | ML_Lane 2 (n) | 14 | CONFIG2 |
| 5 | GND | 15 | AUX_CH(p) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH(n) |
| 8 | GND | 18 | Hot Plug Detect |
| 9 | ML_Lane 1 (p) | 19 | Return DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
HDMI HIGH-DEFINITION MULTIMEDIA INTERFACE ®