ASSEMBLY INSTRUCTION

Assembly Notes

1. Tighten screws to 50% before fixing all screws. An Allen wrench is recommended instead of an electric drill.

2. Place the item on a flat ground to adjust and ensure it remains stable.

3. Gradually tighten all screws with tools.

4. If screws are not aligned with holes during assembly, loosen the other screws to 50% and continue the assembly process.

5. If the item is not stable, loosen all screws, adjust it on a flat ground, and tighten all screws again.

6. Note: If some screws are fully tightened during assembly, others may not align with holes. The holes are designed to be relatively larger to provide more space for screw adjustment.

Part List

Hardware List

Assembly Steps

Step 1:

Connect Back Chaise Frame (E) & Support Back Frame (F). Tighten Bolt (2), Flat Washer (5), Washer (6), Nut (4) with Allen Key (7) & Key (8).

Step 2:

Connect Seat Chaise Frame (A) & Right Armrest Frame (C). Tighten Bolt (3), Flat Washer (5) with Allen Key (7).

Step 3:

Connect the part from Step 2 & Support Armrest Frame (H). Tighten Bolt (1), Flat Washer (5) with Allen Key (7).

Step 4:

Connect the part from Step 3 & Behind Frame (G). Tighten Bolt (2), Flat Washer (5) with Allen Key (7).

Step 5:

Connect the part from Step 4 & Left Armrest Frame (D). Tighten Bolt (2),(3),(4), Flat Washer (5) with Allen Key (7).

Step 6:

Connect the part from Step 1 & Step 5. Tighten Bolt (1) Flat Washer (5) with Allen Key (7).

Step 7:

Put the Chaise Lounger upright and ensure all legs are level. Firmly tighten Bolts with Allen Key (7). Attach Chaise Cushion (B) to the Chaise Lounger. Knot the string to the Chaise Lounger and finish the Chaise Lounger assembly.