Lutron Athena System User Guide

What is an Athena System?

Athena is a flexible, all-in-one solution that integrates advanced lighting, intelligent shades, and connected applications to deliver a holistic light experience. It is an evolving solution that receives frequent updates and improvements when connected to the internet, adding new features, bug fixes, and security enhancements.

For the most up-to-date information, visit: Lutron Athena Overview

For system architecture and device details, see: Athena System Architecture PDF

System Setup

Athena systems are commissioned by a Lutron Field Service Engineer (FSE) using Lutron Designer software.

Connectivity

Athena systems utilize connected processor/gateway devices that communicate via a system Ethernet lighting control network. Internet access is required for system startup and highly recommended for ongoing usage. The network can be cloud-enabled via an included LTE modem module or interfaced with an existing building IT network. Without internet access, the Athena hub will not receive automatic firmware updates and will not be accessible via the Lutron app.

LTE Modem

Lutron provides an LTE modem module for out-of-the-box cloud connectivity during system start-up. This ensures secure and seamless start-up, software updates, remote service/support, and easy connectivity without advanced network configuration. The LTE modem is intended for start-up use only and not for long-term internet access. Lutron recommends connecting Athena processors to an internet connection that supports outbound requests for ongoing connectivity.

Lutron App

The Lutron app, available on the Apple App Store, allows users to connect to an Athena system via the cloud or local network. It enables control and monitoring of lighting, as well as system/scene programming changes.

App Features

• Secure connection to the system via the cloud.
• View current lighting levels and navigate area hierarchy to view lighting zones.
• Toggle all lights on/off in an area.
• Activate scenes within areas.
• Control lights, including master control for all lights in an area.
• Control individual lighting zones based on load type:

  Load Type	Intensity Control	CCT Control	Color Palette
  Ketra	X	X	X
  0-10V (static white)	X
  0-10V (tunable white CCT/INT)	X
  T-Series	X
  DMX*	X
  DALI	X
  Contact Closures	X

  * Loads configured as DMX 1-channel in Lutron Designer will be shown with a 0-100% slider in the app. Multi-channel DMX fixtures may be configured as multiple 1-channel loads.
• Scene editing, including manual text entry for intensity, CCT, and x/y values.
• Fine-tuning mode for precise adjustments with haptic feedback.
• Use phone's camera to select a color for Ketra loads.
• Set Fade and Delay properties for scenes.
• Specify zones as affected/unaffected for scenes.
• Edit tunable white lighting (0-10 V, T-Series, DMX, DALI) intensity.
• Load shed activation/deactivation.
• Timeclock event creation, editing, enabling/disabling, and testing. Events can be scheduled for specific dates or recurring weekly.

Lighting Designer Experience

The Lutron app offers a streamlined workflow for lighting designers to adjust scenes in any area. Features include quick cloud connection, area identification, scene previewing, real-time adjustment of light levels (intensity, color temperature, full color, vibrancy for Ketra), fade, and delay settings. Designers can save settings to scenes, utilize a fine-tuning mode for incremental changes, and perform precise adjustments using text entry.

Cloud Services

Project Account Authorization

Athena systems are associated with a single Lutron account. Future updates will allow multiple users to access a single Athena system with individual myLutron accounts.

Software Updates

Athena system software can be updated via the cloud for new features and improvements. Some new features may require on-site setup. Systems without internet access can be updated by a Lutron FSE.

Simple Connectivity

If the Athena system is internet-connected, it can be accessed via the Lutron app from any device with an internet connection. For more information, visit www.lutron.com/athenalTguide.

Service and Support

Lutron can remotely gather diagnostic information (with permission) for internet-connected Athena systems to resolve issues without an on-site visit.

Third-Party Integration

The Athena system's cloud connection enables cloud-based integrations, such as voice control with third-party systems.

Programming Features

Initial system programming is created using Lutron Designer software. Many changes can be made using the Lutron app.

Scenes

Each area can have up to 16 scenes plus an OFF scene. Area scenes are created in Lutron Designer and can be modified with the Lutron app.

Keypads

Keypad wall controls and Pico wireless controls are configured in Lutron Designer to activate scenes or perform other functions.

Timeclocks

Timeclocks can be created in Lutron Designer or the Lutron app. The app allows editing of event names, times, days, lighting intensity, and CCT/Full Color for Ketra loads. Advanced settings like occupancy are not editable via the app.

Occupancy

Occupancy programming and select sensor settings are defined in Lutron Designer.

Load Shed

Load shed (demand response) is configured in Lutron Designer and can be tested by an FSE. It can be activated via the Athena Automated Demand Response Kit.

Daylighting

Daylighting settings are defined in Lutron Designer.

Device Replacement

Device replacement is performed in Lutron Designer by a Lutron FSE.

System Expansion

System expansion (adding devices/areas) is performed in Lutron Designer by a Lutron FSE.

Shade Limits

Shade limit settings are adjusted in Lutron Designer.

Trim Adjustment

Lighting device trim settings are adjusted in Lutron Designer.

Emergency Lighting

Emergency lighting settings are defined in Lutron Designer.

Operations and Maintenance

Introduction

This manual includes service contact information, general safety instructions, system overview, preventative maintenance requirements, and warranty information. For specific operational details, contact Lutron Technical Support.

Service Contact List

For factory service or replacement parts, contact your Lutron office:

World Headquarters
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
U.S.A.

Toll-free: 1.844.LUTRON1
TEL: +1.610.282.3800
FAX: +1.610.282.1243
Email: support@lutron.com

Safety Precautions

Safety information is included with each product and available at www.lutron.com. Always follow local site safety procedures. Only qualified personnel should perform maintenance. Always de-energize, lockout, tagout, and verify de-energization before working on equipment. Multiple circuits may feed equipment; ensure all supply breakers are OFF. Test for voltage before starting work. Stop work immediately if unexpected issues arise. Use only Lutron-approved replacement parts.

Maintenance Requirements

Lutron products require minimal maintenance:

• Hubs: Clean the front cover as needed.
• Wall Controls: Clean the front surface with a soft towel moistened with a mild soap solution (non-ammonia) approximately every six months. Do not spray cleaning solution directly on the control.
• Sensors: No maintenance required.
• Load Controller Panels: Visually inspect installation periodically. Keep airflow clear of obstructions.
• Battery-Powered Devices: Replace batteries as needed with the correct type specified in the individual product installation sheet.

Warranty Information

Refer to the product warranty or visit: Lutron Warranty Information

For additional information, refer to the corresponding data sheet at www.lutron.com/athena.

Features Not Yet Available

As of System Firmware version 1.10/App version 7.8.

Coming Soon

1. Enhanced account access:
   • Multiple users accessing a single Athena system with individual myLutron accounts.
   • Sharing system access between myLutron accounts.
   • Managing system access (add/remove users).
2. Control of window shades in the app.
3. Lighting Designer enhancements:
   • Raise/Lower functionality.
   • Flash functionality.
4. DALI Type 8 support.

Customer Assistance

For questions regarding installation or operation, contact Lutron Customer Assistance. Please provide the exact model number when calling (e.g., MWP-T-OHW-SN-A).

• U.S.A., Canada, and the Caribbean: 1.844.LUTRON1 (588.7661)
• Europe: +44.(0)20.7680.4481
• Asia: +65.6220.4666
• Mexico: +1.888.235.2910
• Other countries: +1.610.282.3800

Fax: +1.610.282.1243

Visit us online: www.lutron.com/support

The Lutron logo, Lutron, Athena, and Pico are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. Ketra is a trademark or registered trademark of Lutron Ketra LLC, in the US and / or other countries. Apple App Store is a trademark of Apple Inc., registered in the U.S. and other countries. All other product names, logos, and brands are property of their respective owners.

[Lutron Logo]