Scythe Big Shuriken 3 Rev. B CPU Cooler Installation Guide
Introduction
This guide provides instructions for installing the Scythe Big Shuriken 3 Rev. B CPU Cooler (Model: SCBSK-3100). This low-profile cooler is designed for compact PC builds while offering efficient cooling performance for your CPU.
Package Contents
Before proceeding, please verify that all components are present:
- Scythe Big Shuriken 3 CPU Cooler heatsink
- 120mm PWM fan
- Mounting hardware kit (screws, brackets, backplate)
- Thermal paste tube
- Installation manual (this document)
Installation Procedure
Follow these steps carefully to install your new CPU cooler.
Step 1: Prepare the Motherboard
Ensure your computer is powered off and unplugged. Remove the existing CPU cooler if one is installed. Clean the surface of the CPU and the heatsink contact plate with isopropyl alcohol to remove any old thermal paste residue.
[Diagram: Close-up of a CPU socket area on a motherboard, showing cleaning the CPU surface with a cloth.]Step 2: Install Mounting Brackets
The Big Shuriken 3 Rev. B supports various CPU socket types (e.g., Intel LGA1700/1200/115x, AMD AM4/AM5). Select the appropriate brackets and backplate for your motherboard. Attach the brackets to the motherboard using the provided screws, ensuring correct orientation for your socket type.
[Diagram: Motherboard with mounting brackets (e.g., for Intel LGA1700) being secured with screws. Shows the backplate on the rear of the motherboard.]Step 3: Apply Thermal Paste
Apply a small amount of the provided thermal paste to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot or a thin line is generally recommended.
[Diagram: Close-up of a CPU with a small dot of thermal paste applied to its surface.]Step 4: Mount the Heatsink
Carefully align the heatsink over the CPU, ensuring the mounting holes on the heatsink align with the installed brackets. Secure the heatsink by tightening the screws. For even pressure distribution, tighten screws in a diagonal pattern.
[Diagram: The heatsink being placed onto the CPU and secured by screws. Arrows indicate tightening in a cross pattern.]Step 5: Attach the Fan
Mount the 120mm PWM fan onto the heatsink. The fan typically attaches using clips or screws provided with the cooler. Ensure the fan is oriented to push air through the heatsink fins.
[Diagram: The fan being attached to the heatsink fins using clips or screws.]Step 6: Connect the Fan Cable
Connect the fan's power cable to the CPU_FAN header on your motherboard. This header is usually located near the CPU socket.
[Diagram: A motherboard CPU_FAN header with the fan's power cable being plugged into it.]Step 7: Final Checks
Double-check all connections and ensure the heatsink is securely mounted. Close your computer case and power it on.
Specifications
| Feature | Specification |
|---|---|
| Model Name | Big Shuriken 3 Rev. B |
| Model Number | SCBSK-3100 |
| Dimensions (Heatsink) | 120 x 130 x 64 mm (H) |
| Fan Size | 120 x 120 x 15 mm |
| Fan Speed | 300 ~ 1200 RPM (±10%) |
| Fan Airflow | 35.93 CFM (61.0 m³/h) |
| Fan Noise Level | 2.0 ~ 24.9 dBA |
| Socket Compatibility | Intel: LGA1700, LGA1200, LGA115x AMD: AM4, AM5 |
Support and Warranty
For further assistance or warranty information, please refer to the Scythe EU GmbH website or contact their support channels.
