ASUS RT-AX88U Pro Quick Start Guide

Hardware Explanations

I/O Ports Overview

The router features several ports on its rear panel:

• Power button: To turn the router on or off.
• DCIN port: For connecting the power adapter.
• 2.5G/1G WAN port: For connecting your modem or an upstream network device.
• LAN 1-4 ports: For connecting wired devices like computers or switches.
• USB 3.2 Gen 1 port: For connecting USB storage devices or printers.
• Reset button: To restore the router to factory default settings.
• 2.5G/1G LAN port: An additional high-speed LAN port.
• WPS button: For Wi-Fi Protected Setup, allowing easy connection of devices.

LED Lights Overview

The router has several LED indicators to show its status:

• Power LED: Indicates the router is powered on.
• 2.4GHz LED: Indicates activity on the 2.4GHz Wi-Fi band.
• 5GHz LED: Indicates activity on the 5GHz Wi-Fi band.
• 2.5G/1G WAN LED: Indicates the status of the 2.5G/1G WAN port connection.
• 2.5G/1G LAN LED: Indicates the status of the 2.5G/1G LAN port connection.
• USB 3.2 Gen 1 LED: Indicates activity on the USB port.
• WPS LED: Indicates the status of the WPS connection process.

Specifications

One Router Setup Steps

Follow these steps to set up your ASUS RT-AX88U Pro router:

01. Prepare your Modem

1. Unplug the power cable from your cable or DSL modem. If it has a battery backup, remove the battery.
2. Connect your modem to the WAN port on the back of the router using the provided network cable.
3. Power on the modem by plugging it into a power outlet.
4. Check the modem's LED lights to ensure the connection is active.

If you are using DSL for internet, you will need your username and password from your Internet Service Provider (ISP) to properly configure your router.

02. Install your Router

1. Plug the power adapter into the DCIN port on the router and press the Power switch.
2. The Power LED will light up, indicating the hardware is ready.

Setup Methods:

Via ASUS Router App

1. On your iOS or Android mobile device, go to the app store, search for "ASUS Router", and download the app. [App Store logo] [Google Play logo]
2. On your mobile device, go to Settings > Wi-Fi and connect to the default network SSID shown on the product label on the back of the router (e.g., "ASUS_XX", where XX are the last two digits of the MAC address). Alternatively, scan the QR code on the product label to connect to the default network SSID.
3. Launch the ASUS Router App and follow the on-screen instructions to complete the setup.

Via Web Browser

1. Connect your PC to one of the LAN ports on the back of the router using an additional network cable. Alternatively, connect wirelessly to the network using the default SSID shown on the product label (e.g., "ASUS_XX").
2. Open a web browser on your connected PC. You will typically be redirected to the ASUS Setup Wizard. If not, manually navigate to http://www.asusrouter.com.
3. Follow the instructions in the setup wizard to complete the configuration.

FAQ

Frequently Asked Questions

Q1: Where can I find more information about the wireless router?

• For technical support, visit: https://www.asus.com/support
• For video tutorials, visit: https://qr.asus.com/wl_videotutorials

Compliance and Safety Information

ASUS Recycling/Takeback Services

ASUS is committed to environmental protection through its recycling and takeback programs. For detailed recycling information in different regions, please visit: http://csr.asus.com/english/Takeback.htm

REACH

In compliance with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, ASUS publishes chemical substances in its products on the ASUS REACH website: http://csr.asus.com/english/REACH.htm

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received, including that which may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If interference occurs, users are encouraged to try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from the receiver's.
• Consulting the dealer or an experienced radio/TV technician.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Prohibition of Co-location: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. End users must follow specific operating instructions for RF exposure compliance. To maintain compliance, follow the operation instructions documented in this manual. This device is restricted for indoor use.

WARNING: This equipment must be installed and operated in accordance with provided instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted for indoor use.

Innovation, Science and Economic Development Canada (ISED) Statement

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

Operation in the 5150-5250 MHz band is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information: The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The device should be used in a manner that minimizes human contact during normal operation. This equipment should be installed and operated with a minimum distance of 31cm between the radiator and any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Additional Canadian information on RF exposure can be found at: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

Antenna Specifications:

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.