Victrix Pro KO Leverless Fight Stick

Overview

The Victrix Pro KO Leverless Fight Stick is designed for competitive gaming on PlayStation 5 and PlayStation 4 consoles, as well as PC. This advanced controller offers a unique leverless input method, providing precise control for fighting game enthusiasts. This guide details its features, setup, and customization options.

Setup and Connectivity

What's Included

• Victrix Pro KO Leverless Fight Stick
• 3m Braided USB-C Cable
• Switch Puller Tool
• Protective Sleeve

Connecting the Pro KO

Connect the fight stick using the provided USB-C cable to the device. The USB-A end connects to your PlayStation console or PC. Ensure the Platform Mode Switch is set to the correct position (PS5, PS4, or PC) for optimal performance.

Customization and Controls

Removing and Swapping Buttons

The top cover can be removed by sliding four security switches inward and lifting the plate. The included Switch Puller Tool allows for the safe removal and replacement of button caps and switches, enabling personalized button layouts.

Audio Controls

A 3.5mm headset jack is located on the left side of the Pro KO. Volume can be adjusted by holding the Audio Button and pressing the UP or DOWN direction buttons. The microphone can be muted or unmuted with a double-tap of the Audio Button.

Lighting Controls

Cycle through four preset lighting modes (Static, Breathing, Prismatic, OFF) by tapping the Lighting Button. To change the LED color in Static or Breathing modes, hold the Lighting Button and press the LEFT or RIGHT direction buttons.

Button Mapping and Disabling

Additional buttons can be remapped by holding the Function Button and pressing the desired button to map, followed by the target button. LEDs will confirm successful mapping. Only the four additional buttons and L3/R3 buttons can be remapped. Buttons can also be disabled using a similar process, with LEDs indicating the status.

Advanced Features

SOCD Cleaning Modes

The fight stick supports two SOCD (Simultaneously Operating Cardinal Directions) cleaning modes. Toggle between Neutral SOCD (UP + DOWN = Neutral) and Up Priority SOCD (UP + DOWN = UP) by holding the Function Button and pressing the Touch Pad Button.

Tournament Lock Mode

Activate Tournament Lock Mode by sliding the dedicated switch UP. This disables all menu bar buttons (PS, Touch Pad, Create, Lighting, Audio, Function, L3, R3, Options) to prevent accidental inputs and potential disqualifications during competitive play.

Direction Button Modes

By default, the direction buttons function as a D-Pad. Users can switch to Left Analog Stick or Right Analog Stick input by holding the Function Button and pressing the corresponding direction (LEFT for Left Analog, RIGHT for Right Analog). Pressing UP or DOWN while holding the Function Button returns the input to D-Pad mode.

Factory Reset

To restore the Victrix Pro KO to its default settings, simultaneously press and release the CREATE, FUNCTION, and OPTIONS buttons. The LEDs will indicate a successful reset by flashing Prismatic before returning to the default Static Purple. This action resets all configurations, including lighting, audio, button mapping, SOCD mode, and direction button mode.