Behringer XENYX 1202/1002/802/502 Quick Start Guide

Important Safety Instructions

Always follow these safety precautions to prevent electric shock, fire, or injury:

• Do not open the unit; refer servicing to qualified personnel.
• Keep the unit away from water and moisture.
• Do not block ventilation openings.
• Install away from heat sources.
• Protect the power cord from damage.
• Use only manufacturer-specified accessories.
• Unplug during lightning storms or when unused for long periods.
• Ensure proper grounding.
• Dispose of product and batteries responsibly according to WEEE directives.
• Do not place open flames on the unit.
• The apparatus can be used in tropical and moderate climates up to 45°C.

Legal Disclaimer: Music Tribe is not liable for any loss suffered by reliance on the descriptions herein. Technical specifications are subject to change without notice.

Limited Warranty: For warranty terms and conditions, visit musictribe.com/warranty.

Hook-Up Diagram

The hook-up diagrams illustrate how to connect microphones, instruments, speakers, and other audio equipment to your XENYX mixer. Refer to the diagrams for specific connection examples.

Controls Overview

The XENYX mixers feature various controls for input channels, EQ, FX sends, panning, level adjustment, and master output.

• MIC Input: Balanced XLR input for microphones, with switchable +48 V phantom power for condenser microphones.
• LINE IN: Balanced 1/4" TRS input for line-level signals. Can also accept unbalanced mono jacks.
• GAIN: Adjusts the input gain. Turn fully counterclockwise when connecting/disconnecting sources.
• EQUALIZER: 3-band EQ (2-band on 502) for tone shaping, with +/- 15 dB boost/cut.
• LOW CUT: Steep low-cut filter (75 Hz) on mono channels (1002/1202) to remove unwanted low frequencies.
• FX Send: Variable send for external effects units.
• PAN: Controls the stereo position of the signal.
• LEVEL: Determines the channel signal level in the main mix.
• CLIP LED: Indicates signal clipping; reduce GAIN if illuminated.
• Stereo Inputs: For stereo line-level sources. Can be used in mono if only the left input is used.
• BAL (Balance): Adjusts the relative levels of left and right stereo signals. Functions as PAN for mono operation.
• +4/-10 Switch: Selects input sensitivity for line inputs.
• STEREO AUX RETURN (802 only): For returning effects signals to the mixer.
• FX SEND Output: Connects to external effects processors.
• PHONES/CONTROL ROOM: Headphone output and control room monitoring.
• MAIN MIX Outputs: Main stereo outputs for connecting to amplifiers or active speakers.
• 2-TRACK INPUT: For connecting external stereo sources like CD players or tape decks.
• 2-TRACK OUTPUT: Parallel output to MAIN MIX, for connecting to recording devices.
• 2-TR TO MIX Switch: Assigns 2-Track input to the main mix.
• 2-TR TO CTRL ROOM Switch: Monitors 2-Track input in the control room.
• FX TO CTRL ROOM Switch: Monitors FX send signal in the control room (802/502 do not have this).
• +48 V Phantom Power: Activates phantom power for XLR microphone inputs.
• POWER LED: Indicates the unit is powered on.
• LEVEL INDICATOR: 4-segment LED meter for signal level monitoring.

Level Setting

To set channel gains correctly:

1. Set all LEVEL controls to the center position (0 dB).
2. Use the GAIN controls to increase input amplification until signal peaks show 0 dB on the level meter.
3. For digital recorders, ensure the recorder's peak meter does not go into overload. Digital distortion is undesirable and can render recordings useless.
4. A recording level of 0 dB is recommended for all signal types.

Specifications

Detailed specifications for microphone inputs, line inputs, equalizers, outputs, and power supply are provided in the table.

Other Important Information

• Register online: Register your product at musictribe.com for faster service and warranty claims.
• Malfunction: Contact your local Music Tribe reseller or use the online support resources.
• Power Connections: Ensure correct mains voltage and use only specified fuses.

Federal Communications Commission (FCC) Compliance

This equipment complies with Part 15 of the FCC Rules for Class B digital devices. It is designed to provide reasonable protection against harmful interference in residential installations. Users are advised that changes or modifications not expressly approved by Music Tribe may void the user's authority to operate the equipment.

CE Compliance

This product complies with relevant EU directives, including those related to safety, electromagnetic compatibility, and hazardous substances.