TurboTronic DualChef Dual Basket Air Fryer TT-DAF5

Introduction

Thank you for purchasing the DualChef dual basket air fryer by TurboTronic®. This appliance allows you to cook a wide variety of food in a healthier manner with little or no oil. The air fryer uses hot air, high-speed air circulation, and a top grill to prepare dishes quickly and easily, heating ingredients from all sides simultaneously.

Important Safeguards

HOUSEHOLD USE ONLY. READ ALL INSTRUCTIONS.

When using electrical appliances, basic safety precautions should always be followed. Read this user manual carefully before use and keep it for future reference.

⚠️ WARNINGS

• Never immerse the housing containing electrical components and heating elements in water, nor rinse it under the tap.
• Do not let water or other liquid enter the appliance to prevent electric shock.
• Always place ingredients in the basket to prevent contact with heating elements.
• Do not cover air inlet and exhaust openings during operation.
• Do not fill the frying tray with oil, as this may cause a fire hazard.
• Never touch the inside of the appliance while it is operating.
• Check that the appliance's voltage matches your local mains voltage before connecting.
• Do not use the appliance if the plug, power cord, or appliance itself is damaged.
• If the power cord is damaged, it must be replaced by an authorized service center to avoid hazards.
• This appliance is not suitable for children or individuals with physical/mental handicaps or lack of experience/knowledge. Ensure proper guidance if others use the appliance.
• Keep the appliance and its cord out of reach of children when switched on or cooling down.
• Keep the mains cord away from hot surfaces.
• Do not plug in or operate the control panel with wet hands.
• Connect only to an earthed wall socket, ensuring the plug is inserted properly.
• Never connect to an external timer switch.
• Do not place the appliance on or near combustible materials like tablecloths or curtains.
• Maintain at least 10cm clearance at the back, sides, and above the appliance. Do not place anything on top.
• Use the appliance only as described in this manual.
• Do not let the appliance operate unattended.
• Be cautious of hot steam and air released from exhaust openings during operation and when removing the frying tray.
• The surface below the appliance may become hot during use.
• Immediately unplug if dark smoke appears; wait for smoke to stop before removing the tray.

⚠️ Caution

• Place the appliance on a horizontal, level, and stable surface.
• This appliance is intended for normal household use only, not for commercial environments (staff kitchens, offices, farms, hotels, etc.).
• Improper use or failure to follow manual instructions invalidates the warranty and releases the seller from liability for damages.
• Always unplug after use.
• Allow the appliance to cool down for approximately 30 minutes before handling or cleaning.
• Remove burnt remnants.

Symbols:

• ? Indicates to read and review instructions.
• ⚠️ Indicates a hazard that can cause personal injury, death, or substantial property damage.
• ? Take care to avoid contact with hot surfaces. Always use hand protection to avoid burns.
• ? For indoor and household use only.

SAVE THESE INSTRUCTIONS

Getting to Know Your DualChef

Parts Identification:

• A & D: Non-Stick crisper plates
• B & E: Cooking Baskets
• C & F: Basket handle
• G: Top cover
• H: Control panel
• I: Vent windows
• J: Power cord

Control Panel Functions:

The control panel features two zones (Zone 1 and Zone 2) and various buttons:

• Zone 1 (Button 1)
• Temperature plus/minus (Buttons +/- for zone)
• Timer/temperature (Central display and control)
• Timer plus/minus (Buttons +/- for zone)
• Zone 2 (Button 2)
• Preheat
• Pause ⏸️
• Preset Functions: French fries, Meat, Drumsticks, Steak, Cake, Shrimp, Fish, Pizza, Vegetable, Hot dog, Chops
• Smart Finish
• Match Cook
• Start/Stop ▶️

Detailed description of control panel layout: A central digital display shows time and temperature for both zones (e.g., 88:88 88:88). Buttons are arranged around this display, with zone selection, temperature/timer adjustments, and preset function icons.

Before First Use

1. Remove all packing material.
2. Remove any stickers or labels (except the rating label).
3. Wash baskets and crisper plates in hot, soapy water, rinse, and dry thoroughly. (These are the only dishwasher-safe parts). Do not clean the main unit in the dishwasher.
4. Wipe the inside and outside of the appliance with a moist cloth.

Preparing for Use

1. Place the appliance on a stable, horizontal, level, and heat-resistant surface.
2. Place the basket correctly in the frying tray.
3. Do not fill the frying tray with oil or any other liquid.
4. Do not put anything on top of the appliance, as this disrupts airflow and affects results.

Using the Appliance

1. Power On

Plug in the appliance. It will beep, and lights will illuminate. After 1 second, it returns to standby mode with all lights off, except for the power indicator ⏻.

2. Menu Selection/Temperature/Time

1. In standby mode, press the Power button ⏻, then press the Zone 1 button (1) to select a cooking function. Adjust time and temperature using the Time +/- and Temperature +/- buttons. You can also select a preset function icon.
2. After selecting a function for Zone 1, press the Zone 2 button (2) to select a cooking function for the second zone. Adjust time and temperature as needed. You can also select a preset function icon for Zone 2.
3. Press the Start/Stop button ▶️ to begin cooking. Each function has default time and temperature settings, which can be adjusted using the +/- buttons.

Temperature and Time Control

The temperature control range is 50-200°C, with adjustments of 10°C per click. Pressing "+" at 200°C cycles back to 50°C, and pressing "-" at 50°C cycles back to 200°C. The digital display flickers during setting and stops when done.

The adjusting time range is 1 to 60 minutes, with 1-minute increments. Pressing "+" at 60 min cycles to 01 min, and "-" at 01 min cycles to 60 min. The digital display flickers during setting and stops when done.

3. Start, Pause/Stop

After selecting function, time, and temperature, press the Start/Stop button ▶️. The appliance will beep and start working.

During operation, press the Pause button ⏸️ to pause. Press it again to resume. Press the Power button ⏻ to stop operation and return to standby mode.

Noted:

• You can remove the frying tray during operation to check or add food. The program will continue when the tray is reinserted.
• If power is cut or the appliance is unplugged during operation, it will stop. It will resume the program when power is restored or it's plugged back in.
• Six red lights indicate the heating element is working. They flicker one by one when heating. When the set temperature is reached, the heating element stops, and the lights stop flickering.

4. End of Program

When the working time is done (display shows 00 min), the heating element stops. The motor continues to run for 1 minute for cooling, accompanied by a buzzer warning, before entering standby mode.

Smart Finish & Match Cook

Smart Finish

Use Smart Finish to cook two different foods with different functions, temperatures, or times, ensuring both zones finish simultaneously.

1. Program Zone 1: Place food in the basket, select a cooking function.
2. Program Zone 2: Place food in the basket, select a cooking function.
3. Begin cooking: Select "Smart Finish" and press Start/Stop ▶️.

Match Cook

Use Match Cook to cook the same food in both zones, automatically matching settings from Zone 1 to Zone 2.

1. Program Zone 1: Place food in the basket, select a cooking function.
2. Begin cooking: Select "Match Cook" and press Start/Stop ▶️.

Menu Table

This table provides default settings for various functions. Settings are for reference only.

Caution: Do not touch the pan during and for about 30 minutes after use, as it gets very hot. Only hold the pan by the handle.

Settings & Tips

You can set custom time and temperature for cooking. The following table provides basic settings for various ingredients.

Note: Settings are for reference only; results may vary based on ingredient origin, size, shape, and brand. Rapid Air Technology reheats air quickly, so removing the tray briefly has minimal impact.

Tips:

• Smaller ingredients generally require slightly shorter cooking times.
• Larger quantities may need slightly longer times; smaller quantities may need shorter times.
• Shaking ingredients halfway through cooking can improve results and prevent unevenness.
• Coat fresh potatoes with a little oil for crispiness. Fry soon after adding oil.
• Avoid preparing extremely greasy ingredients like sausages.
• Snacks suitable for ovens can also be prepared in the air fryer.
• Optimal amount for crispy fries: 500 grams.
• Use pre-made dough for quick filled snacks; it requires less cooking time than homemade dough.
• Reheat ingredients at 150°C for about 10 minutes.

Potatoes & Fries

Other Ingredients

Note: Add 3 minutes to preparation time if the appliance is cold.

Making Home-made Fries

For best results, use pre-baked fries. If making home-made fries:

1. Peel potatoes and cut into sticks.
2. Soak sticks in water for at least 30 minutes, then drain and dry with kitchen paper.
3. In a bowl, mix sticks with 1/2 tablespoon of olive oil until coated.
4. Remove sticks from the bowl, letting excess oil drain back. Place coated sticks in the basket.
5. Note: Do not tilt the bowl to pour all sticks at once to prevent excess oil collecting in the frying tray.
6. Fry potato sticks according to instructions in this chapter.

Cleaning

Clean the appliance after every use. The frying tray, basket, and interior have a non-stick coating. Do not use metal utensils or abrasive cleaners.

1. Unplug the appliance and let it cool down. Remove the frying tray to speed cooling.
2. Wipe the exterior with a moist cloth.
3. Clean the frying tray and basket with hot water, washing liquid soap, and a non-abrasive sponge. (They are dishwasher-proof).
4. If dirt is stuck, fill the frying tray with hot water and soap, place the basket inside, and soak for 10 minutes.
5. Clean the interior with hot water and a non-abrasive sponge.
6. Clean the heating element with a brush to remove food residues.

Storage

1. Unplug the appliance and let it cool down completely.
2. Ensure all parts are clean and dry.

Disposal of Old Electrical Appliances

The European directive 2002/96/EC (WEEE) requires that old household electrical appliances are not disposed of with unsorted municipal waste. They must be collected separately for optimized recovery and recycling, reducing environmental impact. The ??️ symbol on the product signifies this obligation. Consumers should contact their local authority or retailer for correct disposal information.

Troubleshooting

Limited Warranty

Limited Warranty applies to purchases made from authorized retailers of TurboTronic®.

TurboTronic® Warranty coverage applies to the original owner and the original product only and is not transferable.

TurboTronic® warrants that the unit shall be free from defects in material and workmanship. Limited Warranty applies only when used under normal household conditions and maintained according to the Owner's Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in TurboTronic® sole discretion, will be repaired or replaced.
2. TurboTronic® reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.) requiring regular maintenance or replacement.
2. Any unit tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., keeping the motor base clear of food spills), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by TurboTronic®, including damages during shipping, altering, or repairing.
6. Products purchased, used, or operated outside Europe.

Illustrations may differ from the actual product. Specifications are subject to change without notice.

TurboTronic® and Z-Line® are registered trademarks of Z-GLOBAL B.V.B.A®.

PRINTED IN PRC