Important!
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
It is essential that you read the instructions in this manual before assembling, maintaining and operating the product.
Subject to technical modifications.
Safety Information
Safety, performance, and dependability have been given top priority in the design of the Ryobi string light.
Intended Use
The string light is designed for illuminating distant objects and areas requiring additional light.
⚠ WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
String Light Safety Warnings
- Know the product. Read the operator's manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this product. Following this rule will reduce the risk of electric shock, fire, or serious injury.
- Do not permit children to use the string light. It is not a toy.
- The product is not designed to operate in wet or damp conditions.
- If wrapped or in contact with fabrics, the work light lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the work light lens to come in contact with anything.
- Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using the battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
- Do not place the product or its batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
- To reduce the risk of personal injury and electric shock, the product should not be played with or placed where small children can reach it.
- To reduce the risk of electric fault caused by liquid damage, do not expose to water or rain.
- Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If the tool is loaned, these instructions should also be loaned to prevent misuse of the product and possible injury.
- Do not direct the light beam at persons or animals and do not stare into the light beam (not even from a distance). Staring into the light beam may result in serious injury or vision loss.
- Use only with recommended battery pack and charger. Any attempt to use another battery pack will cause damage to the product and could possibly explode, cause a fire, or personal injury.
- Do not disassemble the product.
- Do not store the product in a damp or wet location, or in a location where the temperature may reach or exceed 40°C (104°F). For example, inside sheds, vehicles, or metal buildings in the summer.
- The product is non-dimmable; do not connect with any dimmers.
- Check damaged parts. Before further use of the product, a part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Do not use the product if it does not function properly.
- Have the product repaired by a qualified person. The product is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified person using original spare parts, otherwise this may result in considerable danger to the user.
- The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
Battery Safety Warnings
- Risk of electric shock. Do not touch uninsulated portion of output connector or uninsulated battery terminal.
- Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
- Do not charge product battery in a damp or wet location. Following this rule will reduce the risk of electric shock.
- For best results, the battery should be charged in a location where the temperature is more than 10°C but less than 38°C. Do not store outside or in vehicles.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not incinerate the battery even if it is severely damaged. The batteries can explode in a fire.
Environmental Protection
♻ Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling.
♺ Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Symbols
The following signal words and meanings are intended to explain the levels of risk associated with this product:
- ⚠ Safety Alert
- V Volts
- ⎓ Direct current
- RCM Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.
- ? Please read the instructions carefully before starting the product.
- ⎔ Class III protection
- ?? Do not stare at light source.
- ℹ Note
- ? Parts or accessories sold separately
Signal Word Meanings
- ⚠ DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
- ⚠ WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
- ⚠ CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
- CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
Transporting Lithium Batteries
Transport the battery in accordance with local and national provisions and regulations.
Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.
Maintenance
- When servicing, use only original Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
- Do not attempt to modify the product or create accessories not recommended for use with the product by the manufacturer.
Know Your Product
The Ryobi R18STL String Light consists of multiple light heads connected by a cable, powered by a battery pack inserted into a base unit. The base unit also features an On/Off button.
- Light head: Individual light units that provide illumination.
- Hook: An integrated hook on each light head for hanging the light.
- Battery port: The receptacle on the base unit where the battery pack is inserted.
- On/Off button: The control button on the base unit to power the light on/off and cycle through brightness settings.
- Key hole hanger: A slot on the base unit, approximately 78 mm wide, designed for mounting the unit on screws or nails.
Product Components Overview
The product includes three light heads, each with an integrated hook, connected by a flexible cable to a central battery base unit. The battery base unit is designed to accept a Ryobi ONE+ 18V battery pack (sold separately) and features an On/Off button. The light heads are designed for versatile positioning, including hanging via their hooks or mounting via the keyhole hanger on the base unit.
Operation
1. Battery Installation and Removal
To install the battery: Align the battery pack with the battery port on the string light base unit and slide it in until it clicks into place. Ensure it is fully seated.
To remove the battery: Press the battery release latches (if present) and slide the battery pack out of the port.
2. Operating the Light
The string light has multiple brightness settings controlled by the On/Off button:
- Press once for High brightness.
- Press a second time for Medium brightness.
- Press a third time for Low brightness.
- Press a fourth time to turn the light off.
3. Using the Hooks and Cable Management
Each light head features a hook for hanging. The hooks can be rotated to adjust the light direction or for compact storage. To manage the cable, wrap it neatly around the designated areas on the light heads or base unit. Avoid tangling or excessive coiling that could damage the cable.
4. Adjusting Light Heads
The light heads can be rotated and angled to direct illumination as needed. Gently pivot the light head on its mount to achieve the desired angle.
5. Mounting the Base Unit
The base unit can be mounted using its keyhole hanger. Measure 78 mm between two mounting points (e.g., screws or nails) to align with the keyhole slots on the back of the base unit. Ensure the mounting points are secure and capable of supporting the weight of the unit and battery. To mount: Align the keyhole slots on the back of the base unit with the pre-installed screws/nails and slide the unit down to secure it. Ensure it is firmly seated and does not wobble. To unmount: Lift the unit upwards to disengage from the screws/nails.
Product Specifications
| Feature | Detail |
|---|---|
| String light Model | R18STL |
| Rated voltage | 18 V ⎓ |
| Rated power | 22 W |
| Colour rendering index (CRI) | 72 |
| Correlated colour temperature (CCT) | 4200 K |
| Beam angle | 100° |
Luminous Flux
| Setting | Lumens |
|---|---|
| High | 1800 lumens |
| Medium | 850 lumens |
| Low | 210 lumens |
Run Time (approximate)
| Battery | Low | Middle | High |
|---|---|---|---|
| 2.5Ah battery | 15.6 hours | 3.7 hours | 2 hours |
| 5.0Ah battery | 30 hours | 8 hours | 3.4 hours |
Battery and Charger Compatibility
| Model | Compatible battery pack (not included) | Compatible charger (not included) |
|---|---|---|
| Lithium-Ion | RB18L13, RB18L15, RB18L20, RB18L25, RB18L40, RB18L50 | BCS618G, BCL14181H, BCL14183H, BCL1418IV*, RC18150U, RC18627U, RC18120 |
* for vehicles with 12V DC outlets
Importer Information
Imported by:
