Soho Radiator Installation Manual

Parts Included (Electric Model)

• 01: Long metal profile (x2)
• 02: Wall mounting brackets
• 03: Screws (x2)
• 04: Screws (x2)
• 05: Small metal plates (x2)
• 06: Fasteners/clips (x2)
• 07: Long mounting rail (x1)
• 08: Screws (x4)
• 09: Central mounting bracket (x1)

Additional screws and fasteners are also shown.

Installation Steps

Step 1: Radiator Unit Overview

Presentation of the Soho radiator structure.

Step 2: Wall Preparation

Shows a wall with an electrical outlet, indicating the installation area.

Step 3: Drilling Mounting Holes

Depicts using a [power drill] to create holes in the wall. It shows screws and wall plugs being inserted into the wall for bracket mounting.

Step 4: Fixing Wall Brackets

Illustrates securing the wall mounting brackets (02) to the wall using screws and wall plugs.

Step 5: Attaching Radiator to Brackets

Shows the radiator unit being connected to the wall-mounted brackets.

Step 6: Final Dimensions

Displays the final dimensions for two Soho models: Soho 140 cm (Height = 121.0 cm) and Soho 180 cm (Height = 161.0 cm).

Step 7: Drilling Mounting Holes (Repeat)

Similar to Step 3, shows drilling holes in the wall with a [power drill].

Step 8: Fixing Wall Brackets (Repeat)

Shows fixing the wall mounting brackets (02) to the wall using screws.

Step 9: Attaching Components to Radiator

Illustrates attaching screws (03, 04) and plates (05) to the radiator structure.

Step 10: Securing Components

Shows securing various components with screws (08, 07).

Step 11: Attaching Fasteners

Depicts attaching fasteners/clips (06) to the radiator structure.

Step 12: Electrical Connection

Shows the electrical connection process. Wires labeled N (Neutral) and F (Phase) are shown connecting to the SOHO unit. It indicates "NON FORNITI" ([not supplied]) for certain electrical components. A detailed wiring diagram shows the connections for N, F, and a ground symbol.

Step 13: Attaching Component

Shows attaching a component (03) to the radiator structure.

Step 14: Securing Parts

Illustrates securing parts with screws (02, 06).

Step 15: Final Assembly of Radiator Tubes

Shows the final assembly of the radiator tubes.

Step 16: Final Radiator Mounting

Shows the final mounting of the radiator for both Soho 140 cm and Soho 180 cm models, using screws (07, 08).

Step 17: Attaching Central Bracket

Depicts attaching the central mounting bracket (09).

Step 18: Final Assembled View

Shows the final assembled radiator structure.

Installation Kit Contents

• 02: Staffa (Bracket)
• 03: Vite TE M8 (Hex head screw M8)
• 03a: Rosetta M8 (Washer M8)
• 04: Vite di sostegno M8 (Support screw M8)
• 05: Piastra staffaggio (Mounting plate)

Installation Phases

Phase 1: Positioning and Initial Attachment

Fig. 1.1: Mark the radiator installation point on the wall. Mark the fixing holes for the brackets (02), considering the radiator length and the inter-axis dimension 'A' specified in Table 1.

Fig. 1.2: Attach the support screws (04) with mounting plates (05) to the radiator, ensuring the correct dimension 'A' is maintained.

Table 1: Inter-axis Dimensions

All dimensions are expressed in mm.

Phase 2: Fixing Brackets to Wall

Fig. 2.1: Fix the brackets (02) to the wall using appropriate screws and wall plugs. Note: "Fissaggi non forniti" ([Fixing screws not supplied]).

Phase 3: Positioning Radiator on Brackets

Fig. 3.1 & 3.2: Position the Soho radiator by inserting the screws (04) into the slots of the brackets (02). Follow the movement indicated by the arrows.

Phase 4: Connecting to Hydraulic System

Fig. 4.1 & 4.2: Connect the system to the radiator's connection points (07). Follow the diagram for the remote valve group. This shows the connection of the Soho unit to the remote valve group, indicating "IN" and "OUT" ports, a "Valvola" (Valve), and a "Detentore" (Lockshield valve). It also illustrates the connection from the wall to the valve group.

Phase 5: Final Securing

Fig. 5.1: Complete the installation by securing the radiator using screws (03) and washers (03a) to the mounting plates (06).