EASY HOME Carpet Cleaner

Package Contents

The package for your EASY HOME Carpet Cleaner includes the following components:

1. Handle

2. Solution Release Trigger

3. Water Solution Tank Cap

4. Maximum Filling Line (FULL)

5. On/Off Switch (I/0)

6. Full Line (for dirty water tank)

7. Dirty Water Tank

8. Exhaust Filter Housing

9. Dirty Water Tank Handle

10. Dirty Water Tank Locking Latch

11. Water Solution Tank

12. Water Solution Tank Release Lever

13. Cord Clip

14. Cord Hooks

15. Carrying Handle

16. Mains Cord

17. Handle Release Pedal

18. Screws (2x)

19. Dirty Water Tank Cap

20. Filter

21. Motor Filter

Required Tools (not included):

• 22. Crosshead Screwdriver

Diagram Descriptions:

• Figure A illustrates the main components of the carpet cleaner, labeled 1 through 18.
• Figure B shows the process of assembling the handle using screws (18).
• Figure C demonstrates how to attach the water solution tank (11) using the release lever (12).
• Figure D shows the operation of the handle release pedal (17) to lower the handle (1).
• Figure E illustrates how to attach the dirty water tank handle (9).
• Figure F shows how to unlock and lock the dirty water tank cap (19).
• Figure G shows the dirty water tank (7) being placed back into the product.
• Figure H shows the removal of the exhaust filter housing (8) from the dirty water tank (7).
• Figure I shows the removal of the filter (20) from the exhaust filter housing (8).
• Figure J shows the removal of the motor filter (21).

General Information

Reading and Storing the User Manual

This user manual accompanies your carpet cleaner and contains important information on setup and handling. Please read it carefully, especially the safety instructions, before using the product. Failure to do so may result in personal injury or damage to the product. Store the manual for future reference and include it when passing the product to third parties. For an electronic copy, contact service@wkfe.com.hk.

Proper Use

This product is designed exclusively for cleaning carpets and for private use only. It is not suitable for commercial purposes. Use only as described in this manual. Any other use is considered improper and may result in damage to property or persons. The manufacturer or vendor is not liable for damages or injuries incurred through improper or incorrect use.

Explanation of Symbols

• ? This symbol provides useful additional information on handling and use.
• This symbol identifies appliances that correspond to protection class II.
• IPX4: The product is protected against water splashing from any angle.
• 36: Warranty period: 36 months (3 years).

Safety

Signal Symbol/Word Definitions

• WARNING! This symbol/word designates a hazard with moderate risk, which may result in death or severe injury if not avoided.
• CAUTION! This symbol/word designates a hazard with low risk, which may result in minor or moderate injury if not avoided.
• NOTICE! This signal word warns of possible damage to property.

General Safety Instructions

• Risk of Electric Shock! Ensure correct electrical installation and connect only to sockets matching the product's rating plate. Connect to an easily accessible socket for quick disconnection. Do not use if the product, mains cord, or plug is damaged. If the supply cord is damaged, it must be replaced by the manufacturer or qualified personnel. Do not open the housing; repairs must be performed by qualified professionals. Only use original device data compliant parts for repairs. Do not use with external timers or remote controls. Do not immerse the product or mains cord in water or other liquids. Never touch the mains plug with wet or damp hands. Always pull the plug out by the plug itself, not the cord. Never move, pull, or carry the product by its mains cord. Keep the product and cord away from open flames and hot surfaces. Lay the mains cord to avoid tripping hazards and do not kink it or lay it over sharp edges. Use the product indoors only, not in damp rooms or rain. Do not place the product where it could fall into a tub or sink. Never reach for an electrical device that has fallen into water; disconnect the mains plug immediately. Never insert objects into the housing. Always switch off and unplug the product when not in use, cleaning, or if a malfunction occurs. WARNING: The mains plug must be removed before cleaning or maintenance.
• Danger for Children and Persons with Impaired Capabilities! This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised by a responsible person. Children should be supervised to ensure they do not play with the appliance. Cleaning and user maintenance should not be done by children without supervision. Keep children away from the product and mains cord. Do not leave the product unattended. Ensure children do not play with plastic wrapping, as it can cause suffocation.
• Risk of Damage! Improper handling can damage the product. Never expose the product to high temperatures or weather effects. Stop using the product if any parts are cracked, broken, or deformed; replace only with original spare parts. Do not use the product to suck up liquids other than the dispensed cleaning solution. Do not suck up wet or damp materials like mud, tile grout, or plaster filler. Do not use the product without the tanks in place. Ensure all openings and outlets are clear of blockages. Keep hair, loose clothing, fingers, and body parts away from openings and moving parts. Do not use the product to suck up flammable or toxic liquids or use it in areas where they may be present. Do not suck up anything burning or smoking, such as cigarettes, matches, or hot ashes.

Checking the Product and Package Contents

Risk of Damage! Be careful when opening the packaging with sharp objects to avoid damaging the product.

1. Take the product out of the packaging.
2. Check that all parts are included (refer to Figure A).
3. Inspect the product and individual parts for damage. If damaged, do not use the product and contact the manufacturer via the service address on the warranty card.

Product Assembly

Risk of Injury! Improper handling can cause injury.

1. Do not connect the product to a mains socket until it is fully assembled.
2. Do not operate the product without the handle being firmly screwed into place.

Assembly Steps:

1. Set the product in an upright position.
2. Firmly place the handle (1) onto the main body of the product, ensuring the cord clip (13) is on the same side as the cord hooks (14) (see Figure B).
3. Using a crosshead screwdriver (22), drive one screw (18) into each side of the handle and fasten securely (see Figure B). Do not overtighten screws to avoid stripping the holes.

Carpet Preparation

Risk of Damage! Using the product as a dry vacuum will damage it. Only use with an appropriate carpet cleaning solution.

1. Remove as much furniture as possible from the room. Place protective covering under and around any remaining furniture.
2. Thoroughly vacuum the carpet to be cleaned with a regular vacuum cleaner.
3. Dampen a white cloth with the carpet cleaning solution you intend to use.
4. Gently rub the cloth over a small test area on the carpet to check for colour bleeding. If the cloth remains clean, it is safe to proceed.

Operation

Filling the Water Solution Tank

Risk of Injury! Improper handling can cause injury.

• Always unplug the product before filling the water solution tank.
• Avoid prolonged skin contact with cleaning solutions.
• Keep carpet cleaning solution out of reach of children.
• In case of eye contact, rinse immediately with plenty of water and seek medical advice.

Risk of Damage! Using the product without the water solution tank in place or with the wrong solution may damage it.

• Always ensure the water solution tank is properly in place before use.
• Do not use solvents, cleaners with strong acidic or alkali formulas, or cleaning solutions not specifically for carpet cleaning machines.
• Use only suitable (low-foaming) carpet cleaning solutions. Incorrect solutions can cause excess foaming and reduce effectiveness. Carpet cleaning solution is not included; most commercially available low-foaming solutions are suitable. Always read the manufacturer's instructions.

Steps to Fill the Tank:

1. Unplug the product.
2. Lift the water solution tank release lever (12) and remove the water solution tank (11) (see Figure C).
3. Unscrew and remove the water solution tank cap (3).
4. Follow the instructions on the cleaning solution bottle. Add the solution and then fill the tank with warm tap water (max. 40 °C / 104 °F). Do not fill beyond the maximum filling line (FULL) (4).
5. Replace the water solution tank cap.
6. Place the water solution tank back into position by pushing it down until it clicks into place.

Repeat these steps (except step 4) to empty the water solution tank after use and before storage.

Cleaning a Carpet

• Determine your starting and stopping points before cleaning to avoid walking over cleaned areas.
• Do not oversaturate the carpet with cleaning solution.
• For heavily soiled areas, additional applications may be necessary.

1. Plug the mains cord (16) into a mains socket and turn the product on using the on/off switch (5) set to 'I' (ON).
2. Step on the handle release pedal (17) to lower the handle (1) into the cleaning position (see Figure D).
3. While pressing the solution release trigger (2), pull the product backward towards you.
4. Release the trigger and push the product forward in the same path to remove the dirty cleaning solution.
5. Repeat steps 3-4 for other carpet sections or heavily soiled areas.
6. When finished, turn the product off by setting the on/off switch (5) to '0' (OFF).
7. Push the handle forward until it is upright and locked into place.
8. Unplug the product and wrap the mains cord around the cord hooks (14).

Tips for Carpet Cleaning

• Use the carrying handle (15) to move the product to the desired cleaning location.
• Do not run the product over the mains cord (16).
• Use a steady, moderate, forwards and backwards motion.
• Always work from back to front across a room to avoid stepping on wet carpet.
• Do not make the carpet too wet. Use no more than two sets of forward and backward strokes while releasing cleaning solution. Follow with dry strokes for better results.
• Wipe any cleaning solution from woodwork and furniture to prevent damage.
• Allow ample time for the carpet to dry and avoid walking on it until it is dry. Increased air circulation (open doors, fans) or a dehumidifier can help dry the carpet and prevent mold or mildew.
• Vacuum the carpet thoroughly before cleaning and after it has dried.

Emptying the Dirty Water Tank

Risk of Injury! Improper handling can cause injury.

• Always unplug the product before emptying the dirty water tank.

An automatic shut-off device prevents the product from picking up more dirty water than the tank can hold. You will know the tank needs emptying when the motor sound rises in pitch, or the dirty solution reaches the FULL line (6) in the dirty water tank.

1. Unplug the product.
2. Unlock the dirty water tank (7) by pressing the locking latch (10) and lifting the handle (9) simultaneously (see Figure E).
3. Remove the dirty water tank from the product.
4. Open the dirty water tank cap (19) by turning it anticlockwise until the grip points to "unlock" (see Figure F).
5. Empty the dirty water tank, replace the cap, and turn it to the "lock" position. Place the dirty water tank back into the product (see Figure G).
6. Push the dirty water tank handle down until the locking latch (10) clicks into place.

Cleaning

Risk of Injury! Improper handling can cause injury.

• Always unplug the product when not in use, refilling tanks, cleaning, or performing maintenance.

Risk of Damage! Improper handling can result in damage.

• Do not use aggressive cleaners, brushes with metal or nylon bristles, or sharp metallic utensils like knives or hard scrapers, as they can damage surfaces.
• Never immerse the motor unit in water or other liquids, and do not rinse it under a tap or with a hose.

Cleaning the Filters

Risk of Damage! Improper handling can result in damage.

• Do not clean filters with chemicals, as this will destroy them.

1. Remove the dirty water tank (7) as described in the "Emptying the Dirty Water Tank" section.
2. Remove the exhaust filter housing (8) from the dirty water tank (see Figure H).
3. Pull out the filter (20) from the exhaust filter housing (see Figure I).
4. Rinse the filter with warm water (max. 40 °C / 104 °F). Allow the filter to dry thoroughly.
5. Replace the filter and put the exhaust filter housing back into the dirty water tank.
6. With the dirty water tank still removed, pull out the motor filter (21) (see Figure J).
7. Rinse the motor filter with warm water. Allow it to dry thoroughly.
8. Replace the motor filter and put the dirty water tank back into the product as described in the "Emptying the Dirty Water Tank" section.

Cleaning the Product

1. Unplug the product.
2. Ensure the water solution tank (11) and dirty water tank (7) are empty (refer to "Filling the Water Solution Tank" and "Emptying the Dirty Water Tank" sections).
3. Use a soft damp cloth to wipe the product and accessories. Allow all parts to dry completely.

Storage

Risk of Damage! Mineral deposits and mildew can form if cleaning solution or water is left in the tanks, affecting product performance.

• Do not store the product with cleaning solution in the water solution tank or dirty water in the dirty water tank.
• All parts must be completely dry before storage.
• Always store the product in a dry area.
• Protect the product from direct sunlight.
• Store the product out of reach of children.

Troubleshooting

Some minor faults can be fixed by the user. If problems persist, contact customer service. Do not attempt to repair the product yourself.

Technical Data

Disposal

Disposing of the Packaging

Sort packaging before disposal. Dispose of paperboard and cardboard with recycled paper services and wrappings with appropriate collection services.

Disposing of the Product

If the product is no longer usable, dispose of it in accordance with local city or county regulations. Ensure your recycling information applies to local regulations.

Warranty Details

EASY HOME products are developed to stringent quality specifications. If you are not satisfied, return the product to an ALDI store within 60 days of purchase for a full refund or replacement, or contact after-sales support. The product is guaranteed free from defects in workmanship and parts for 36 months from the date of purchase. Benefits conferred by this warranty are in addition to consumer rights under the Competition and Consumer Act 2010 and similar laws.

Australian Consumer Law guarantees apply, entitling you to a replacement or refund for a major failure and compensation for other foreseeable loss or damage. You are also entitled to repair or replacement if the goods fail to be of acceptable quality and the failure is not major.

After Sales Support:

• Phone: 1800-898 750
• Email: service@wkfe.com.hk

Warranty Period: 3 Years

Repair and Refurbished Goods or Parts Notice

Register your purchase at www.aldi.com.au/en/about-aldi/product-registration/ for updates. Faulty products may need to be returned for repair. Be aware that user-generated data stored on the product may be lost during repair. Save your data elsewhere before sending for repair. Products may be replaced with refurbished goods or refurbished parts that meet ALDI's quality specifications. If you are unsatisfied with a repair, contact customer service by telephone on 1800-898 750 or write to Install + Fix Solutions, Unit 1, 9 Kingsbury Street, Brendale QLD 4500, AUSTRALIA. Support hours: 08:30 am - 6:00 pm AEST.

After Sales Support:

• Phone: 1800-898 750
• Email: service@wkfe.com.hk

Warranty Period: 3 Years

Product Information

ALDI guarantees its exclusive brand products are developed to stringent quality specifications. If not entirely satisfied, return to the nearest ALDI store within 60 days of purchase for a refund or replacement, or contact the supplier's Customer Service Hotline.

Made in China

EASY HOME® is a registered trademark of ALDI Stores.

Distributed by:

ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au

Model: VC9385S

Version No: V4

Product Code: 99650

Date of Issue: 03/2020