HARDELL Mini Cordless Rotary Tool

Product Descriptions

Components

• 1. Chuck: (Range-1.6/2.3mm)
• 2. Spindle Locking Button: (Do not press it when the device is running)
• 3. Speed Indicator: Displays speed levels (5500/8100/10800/12900/15000rpm)
• 4. Type-C USB Charging Port
• 5. Heat Dissipation Holes: Dissipate heat produced by motor operation
• 6. Speed Control Button: 5-level speed control

Specification

• INPUT: 3.7V
• Battery: 600mAh Li-ion
• No Load Speed: 5500-15000r/min
• Speed Settings: 5
• Collet Size: φ 1.6/2.3mm
• Charge time: 1 hour (Full charged, all indicator lights turn purple)

Do not wait until the tool is completely dead before plugging it in. If the battery is dead, do not try to press the power button, as this will damage the battery.

Charging Indicator:

• When charging: Indicator blinks successively.
• When fully charged: All lights turn purple.

Package Includes

Sanding/Cleaning Accessories:

• Sanding Bands (x20)
• Sanding Drum Mandrel (x1)

Grinding Accessories:

• Stone Grinding Bits (x5)

Drilling Accessories:

• HSS Twist Drill (x2)

Engraving / Carving Accessories:

• Diamond Bits (x5)

Polishing Accessories:

• Polishing Wheel (x2)

Cleaning Accessories:

• Nylon Brush (x2)

Included Items:

• Tool Box (x1)
• USB Cable (x1)
• Accessory Case (x1)
• Spanner (x1)

Note: The product contains a total of 4 collets, sizes 1.6/2.3mm. Usually, a 2.3mm collet is already installed on the rotary tool.

How to Use

1. Press the spindle locking button and unscrew the nut.
2. Choose the suitable collet and put the black nut on.
3. Insert the desired bit, hold the spindle locking button, and screw on the nut tightly.
4. Release the spindle locking button.

ATTENTION: Different accessories fit different collets. If accessories come off easily, please replace with another suitable collet.

How to fit a sanding band:

1. Align the sanding drum and band.
2. Press the band into the drum and twist the top of the drum screw to adjust the tightness.

Widely Application

ATTENTION: Not for Heavy-duty Projects !!!

Safety Instructions

1. Keep this product away from children.
2. Keep this product away from water.
3. Do not touch it with wet hands.
4. Do not place the product on hot surfaces, near hot surfaces, or an open fire.
5. Please disassemble the equipment under professional guidance.
6. Do not hold the work by hand or against your body, as this may lead to loss of control.
7. Do not force the tool.
8. Do not use tools if the switch does not turn on or off.
9. Maintain tools with care. Keep cutting tools sharp and clean.
10. Check for misalignment or binding of moving parts, or breakage of parts.
11. Use only accessories recommended by the manufacturer for your model.
12. Use this power tool and accessories following the instructions.

Warranty

The product supports a 1-year warranty from the date of purchase. This warranty does not apply to products that have been lost, altered, broken, or damaged by misuse or failure to follow the instructions provided with the product. Never try to repair the product yourself. For any inquiries concerning HARDELL products, please contact our after-sales team via hardell.service@gmail.com. We are free to help you solve your problem anytime.