59 pagine
Firmware- Grandstream Networks
WP810/WP822/WP825 Firmware Release Notes
IMPORTANT UPGRADING NOTE
· Once the WP810/822/825 device is upgraded to 1.0.11.22, it cannot be downgraded to 1.0.11.20 or earlier version.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 1
Table of Content
IMPORTANT UPGRADING NOTE ............................................................ 1
FIRMWARE VERSION 1.0.11.34............................................................... 6
PRODUCT NAME ..................................................................................................................................6 DATE ......................................................................................................................................................6 FIRMWARE FILE INFORMATION .........................................................................................................6 ENHANCEMENT .................................................................................................................................... 6 BUG FIX .................................................................................................................................................6 NEW FEATURES OVERVIEW ..................................................................................................................7
VoWLAN Target Delay.....................................................................................................................7 Poor Signal Scan Interval and Roaming Signal Threshold .............................................................7 Power Save Mode ...........................................................................................................................8 Enable DND Feature .......................................................................................................................8 Lock Speaker Volume .....................................................................................................................9 Speaker Ring Volume......................................................................................................................9
FIRMWARE VERSION 1.0.11.28..............................................................11
PRODUCT NAME ................................................................................................................................ 11 DATE .................................................................................................................................................... 11 FIRMWARE FILE INFORMATION ....................................................................................................... 11 ENHANCEMENT.................................................................................................................................. 11 BUG FIX ............................................................................................................................................... 11 NEW FEATURES OVERVIEW ................................................................................................................12
Account Ringtone and Default Ringtone .......................................................................................13 SIP Timer B and Timer F Timeout.................................................................................................13 Wallpaper....................................................................................................................................... 14 LED Control ...................................................................................................................................15 Factory Reset Security Level ........................................................................................................15 Disable Firmware Upgrade Confirmation ......................................................................................16 Notification Beep ...........................................................................................................................16 SIP Message Alert Repeat Count..................................................................................................17 Maximum Number of SIP Request Retries ...................................................................................17 Failback Timer ...............................................................................................................................18
FIRMWARE VERSION 1.0.11.22..............................................................19
PRODUCT NAME ................................................................................................................................19 DATE ....................................................................................................................................................19 FIRMWARE FILE INFORMATION .......................................................................................................19
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 2
ENHANCEMENT .................................................................................................................................. 19 BUG FIX ...............................................................................................................................................19 NEW FEATURES OVERVIEW ................................................................................................................20
Disable Key As Send Redial .........................................................................................................20 OpenVPN® Settings......................................................................................................................20
FIRMWARE VERSION 1.0.11.20..............................................................23
PRODUCT NAME ................................................................................................................................23 DATE ....................................................................................................................................................23 FIRMWARE FILE INFORMATION .......................................................................................................23 ENHANCEMENT .................................................................................................................................. 23 BUG FIX ...............................................................................................................................................23 NEW FEATURES OVERVIEW ................................................................................................................24
With Secret Key Information..........................................................................................................24 Capture in Monitor Mode ...............................................................................................................24 3CX Auto Provision .......................................................................................................................25 Grandstream Door System............................................................................................................25 Off-hook Auto Dial .........................................................................................................................27 Audio Control .................................................................................................................................28
FIRMWARE VERSION 1.0.11.8 ...............................................................29
PRODUCT NAME ................................................................................................................................29 DATE ....................................................................................................................................................29 FIRMWARE FILE INFORMATION .......................................................................................................29 ENHANCEMENT .................................................................................................................................. 29 BUG FIX ...............................................................................................................................................29 KNOWN ISSUES .................................................................................................................................29 NEW FEATURES OVERVIEW ................................................................................................................30
Enable TCP Keep Alive .................................................................................................................30 Off-cradle Pickup ...........................................................................................................................30 Disable Call End Tone ...................................................................................................................30
FIRMWARE VERSION 1.0.11.2 ...............................................................32
PRODUCT NAME ................................................................................................................................32 DATE ....................................................................................................................................................32 FIRMWARE FILE INFORMATION .......................................................................................................32 ENHANCEMENT .................................................................................................................................. 32 BUG FIX ...............................................................................................................................................32 NEW FEATURES OVERVIEW.............................................................................................................32
Disable in-call DTMF Display ........................................................................................................32
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 3
FIRMWARE VERSION 1.0.9.23 ...............................................................34
PRODUCT NAME ................................................................................................................................34 DATE ....................................................................................................................................................34 FIRMWARE FILE INFORMATION .......................................................................................................34 ENHANCEMENT .................................................................................................................................. 34 BUG FIX ...............................................................................................................................................34 KNOWN ISSUES .................................................................................................................................36 NEW FEATURES OVERVIEW.............................................................................................................36
LDAP .............................................................................................................................................36 Use MAC Header ..........................................................................................................................38 Add MAC in User-Agent ................................................................................................................38 Allow Dial Through Popups ...........................................................................................................39 5G or 2.4G Wi-Fi Icon Indication ...................................................................................................39
FIRMWARE VERSION 1.0.7.83 ...............................................................40
PRODUCT NAME ................................................................................................................................40 DATE ....................................................................................................................................................40 FIRMWARE FILE INFORMATION .......................................................................................................40 BUG FIX ...............................................................................................................................................40
FIRMWARE VERSION 1.0.7.68 ...............................................................42
PRODUCT NAME ................................................................................................................................42 DATE ....................................................................................................................................................42 FIRMWARE FILE INFORMATION .......................................................................................................42 ENHANCEMENT .................................................................................................................................. 42 BUG FIX ...............................................................................................................................................43 KNOWN ISSUES .................................................................................................................................44 NEW FEATURES OVERVIEW.............................................................................................................44
REGISTER BEFORE DNS SRV FAILOVER ................................................................................44 TLS VERSION...............................................................................................................................44 FEATURE KEY SYNCHRONIZATION ..........................................................................................45 CAPTURE .....................................................................................................................................45 MATCH INCOMING CALLER ID...................................................................................................47 TR-069 ........................................................................................................................................... 50 CONFIGURATION VIA KEYPAD MENU.......................................................................................51 802.11r ........................................................................................................................................... 51
FIRMWARE VERSION 1.0.7.18 ...............................................................53
PRODUCT NAME ................................................................................................................................53 DATE ....................................................................................................................................................53
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 4
FIRMWARE FILE INFORMATION .......................................................................................................53 ENHANCEMENT .................................................................................................................................. 53 BUG FIX ...............................................................................................................................................53 NEW FEATURES OVERVIEW.............................................................................................................53
PHONEBOOK DOWNLOAD SETTINGS......................................................................................54 DISABLE RECOVERY ON BLIND TRANSFER ...........................................................................54
FIRMWARE VERSION 1.0.7.7 .................................................................56
PRODUCT NAME ................................................................................................................................56 DATE ....................................................................................................................................................56 FIRMWARE FILE INFORMATION .......................................................................................................56 ENHANCEMENT .................................................................................................................................. 56 BUG FIX ...............................................................................................................................................56 NEW FEATURES OVERVIEW.............................................................................................................56
MULTICAST PAGING SETTINGS ................................................................................................56
FIRMWARE VERSION 1.0.1.1 .................................................................59
PRODUCT NAME ................................................................................................................................59 DATE ....................................................................................................................................................59 FIRMWARE FILE INFORMATION .......................................................................................................59
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 5
FIRMWARE VERSION 1.0.11.34
PRODUCT NAME
WP810, WP822, WP825
DATE
03/17/2023
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: 5222b554029e55ea450384f6b127447f
ENHANCEMENT
· Added support for increased jitter buffer target delay. [VoWLAN Target Delay] · Added roam scan parameters. [Poor Signal Scan Interval and Roaming Signal Threshold] · Added support for power saving. [Power Save Mode] · Enhanced "Network Monitor" which supports MAC address on LCD. (LCD GUI->Status ->Network
Monitor-> MAC address) · Added support for 802.11k/v. · Added support for Microsoft extensions with EAP-PEAP. · Added support for disabling the DND mode. [Enable DND Feature] · Added support for lock volume control. [Lock Speaker Volume] · Added support set the volume from WebUI. [Speaker Ring Volume] · Optimized LCD GUI strings. · Optimized WP810 GDMS redirection and provision time. · Added support for Turkish special characters. · Added support for attended transfer feature on WP810 as WP822/WP825.
BUG FIX
· Fixed RTP frames are sent using WMM Video Access Category. · Fixed Timezone issue on Metaswitch. · Fixed device when DTMF mode is set to IN Audio or SIP INFO, and the call is abnormal. · Fixed a bug that causes GUI syslog level to be not updated when applying changes on WebUI. · Fixed device does not send config file requests to the updated config server after GDMS redirection. · Fixed device No Preview/Video Stream from GDS3710 When Using Direct IP Calls. · Fixed a bug that causes Audio to play directly on the speaker. · [WP822] Fixed WP822 cannot resume a held call under specific scenarios on Metaswitch.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 6
· Fixed WebUI missing tooltips for Timer B and Timer F. · Fixed device When DNS lookup failed, the device is not registered with the results of the previous DNS
cache on Telstra. · Fixed device Bluetooth call RX has a high probability of no sound. · Fixed device Cannot establish calls via SRTP. · Fixed the Client Certificate Field Insufficient Allowed Characters. · Fixed device Missing Caller ID on the Call History Section. · Fixed Multicast Paging is still in "Enabled" after the device reset. · Fixed WP810 The split operation cannot be performed on the Attended transfer interface. · Fixed SRTP call display "Calling..." and gs_ phone crash.
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use them from the user's point of view.
VoWLAN Target Delay · Web Configuration Users can find the configuration in Web UI -> Network-> WiFi Settings-> Advanced Settings
· Functionality This feature could let the user configure the jitter buffer target delay.
· New P Values Pvalue Description 82281 VoWLAN Target Delay
Value range 0 - Low 1 - Medium 2 - High
Default 0 - Low
Poor Signal Scan Interval and Roaming Signal Threshold · Web Configuration Users can find the configuration in Web UI -> Network-> WiFi Settings-> Advanced Settings
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 7
· Functionality This feature could let the user configure Poor Signal Scan Interval and Roaming Signal Threshold. Poor Signal Scan Interval sets the time interval for signal scanning when the Wi-Fi signal strength is lower than the signal threshold and there is no hotspot that is higher than the current signal strength. Roaming Signal Threshold sets the Wi-Fi signal threshold Wi-Fi. When the Wi-Fi signal strength of the device drops below this configured value, the device will scan for a hotspot above the threshold value and connect to it.
· New P Values Pvalue Description 22231 Poor Signal Scan Interval
22232 Roaming Signal Threshold
Value range Number: 0 to 300 Number: -100 to -30
Default 5
-55
Power Save Mode · Web Configuration Users can find the configuration in Web UI -> Network-> WiFi Settings-> Advanced Settings
· Functionality This feature could let the user configure the Power Save Mode on WP810/822/825 devices. There are three options. Optimum - This setting will use all available power-saving features available with the current WiFi chipset. Relaxed Fast-PS - Return to sleep aggressiveness will be reduced. Disable during calling - Power save will be disabled during voice calls to improve compatibility. Disable - Radio will run in CAM mode at all times, and battery life will be significantly impacted.
Pvalue Description 82269 Power Save Mode
Value range 0 - Optimum 1 - Relaxed Fast-PS 2 - Disable During Calling 3 - Disable
Default 0 - Optimum
Enable DND Feature · Web Configuration Users can find the configuration in Web UI -> Settings-> Call Features
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 8
· Functionality
This feature could let the user configure enable or disable the DND Feature on WP devices. If set to "No",
a user cannot turn on the "Do Not Disturb" feature via the MUTE key, MPK, or menu on LCD.
Pvalue Description
Value range
Default
8446 Enable DND Feature
0 - No
1 - Yes
1 - Yes
Lock Speaker Volume · Web Configuration Users can find the configuration in Web UI -> Settings -> Preferences ->Audio Control
· Functionality This feature could let the user configure to Lock the Speaker Volume in either ring or talk. The Lock volume adjustment when the option is enabled.
Pvalue Description 8392 Lock Speaker Volume
Value range 0 - No 1 - Ring 2 - Talk 3 - Both
Default 0 - No
Speaker Ring Volume · Web Configuration Users can find the configuration in Web UI -> Settings -> Preferences ->Audio Control
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 9
· Functionality
This feature could let the user configure to the speaker ring volume. The valid range is 0 to 7.
Pvalue Description
Value range
Default
8352 Speaker Ring Volume
Number: 0 to 7.
5
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 10
FIRMWARE VERSION 1.0.11.28
PRODUCT NAME
WP810, WP822, WP825
DATE
01/13/2023
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: 244474e2ec11d44b73c9082f27aace9a
ENHANCEMENT
· Added support reboot notification for certain if must reboot to apply settings. · Added support allows PTT audio to come through the 3.5 mm audio jack output. · Added support to disable/enable the function to hang up the call when the device is placed upside
down. · Added support for different account ringtones without using Match Incoming Caller ID.
[Account Ringtone and Default Ringtone] · Added Support to configure F-timer and B-timer. [Disable Key As Send Redial] · Integrate new Digicert certificates in firmware. · Added support for custom wallpaper provisioning through remote server path and GDMS. [Wallpaper] · Added the options to control the indicated LED pattern. [LED Control] · Added support for factory reset the security level. [Factory Reset Security Level] · Added support for upgrade prompt bypass. [Disable Firmware Upgrade Confirmation] · Added support for attended transfer before answer. · Added support to disable the Notification Beep. [Notification Beep] · Added support for SIP messages tone. [SIP Message Alert Repeat Count] · Added support for Maximum Number of SIP Request Retries. [Maximum Number of SIP Request
Retries] · Added support for Failback Timer. [Failback Timer] · Added the option "Saved one until failback timer expires" in DNS SRV Fail-over Mode.
BUG FIX
· Fixed a bug that caused ATE factory reset test failure. · Fixed device cannot be factory reset when the device is never connected to Wi-Fi.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 11
· Fixed device DHCP Option 12 cannot take effect. · Fixed some problems with Incoming Calls and Outgoing Calls functions in LDAP. · Fixed the device not being able to fully edit the number before calling. · Fixed a CA certificate provisioning issue. · Fixed the issue that the device's headphone volume is too quiet. · Fixed the issue that the LDAP contact name is not showing during incoming call. · Fixed some calls that did not come through from certain numbers or providers. · Fixed the function of "Cancel Call Gesture" which does not work issue. · Fixed the Registering/Removing a SIP account will not immediately send a registration or remove
packet. · Fixed Enter the LDAP contact page and click any button to generate the core file. · Fixed the SIP Timer B Timeout and SIP Timer F Timeout time does not take effect. · Fixed device the contact ringtone cannot be set as default. · Fixed device only - 6/0/6dB of Headset TX/RX gain can be saved. · Fixed the time display does not change with the time format. · Fixed LCD's Time is 1 hour behind when set to "auto" in Time Settings. · Fixed an issue that caused no audio on either side after a call is transferred to the device. · Fixed device staying on PTT mode when entering the channel menu. · Fixed device the phonebook upload is successful, but the prompt is abnormal. · Fixed device Toggling VPN settings causes gs_phone to crash. · Fixed the device sends only the first sip address resolved by DNS-NAPTR to initiate registration. · Fixed when DNS mode is set to SRV, the device sends the First and Second sip address resolved by
SRV to initiate registration in some scenarios. · Fixed the device sends the First and Second sip address resolved by DNS-NAPTR to initiate
registration. · Fixed account 1 or 2 is set to different DNS modes, and account 2 fails to register. · Fixed DNS SRV Fail-over Mode set to "Saved one until DNS TTL" does not take effect. · Fixed when registration fails over to an SBC, other than the one currently registered with, a new call-
id must be used. · Fixed when the screen freeze button does not respond after you stay on the Network Monitor
interface for a period of time. · Fixed the screen that remains on the current new contact page after saving the contact. · Fixed the device not following the SIP registration failure retry timer. · Fixed after the DUT locks the screen, the device has missed an incoming call, and the incoming call
number display is incomplete. · Fixed when DNS lookup failed, the device is not registered with the results of the previous DNS
cache. · Fixed when DNS mode is set to "NAPTR/SRV", the failover was triggered by an invite, and the invite
will not proceed after establishing a new registration.
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use them from the user's point of view.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 12
Account Ringtone and Default Ringtone · Web Configuration Users can find the configuration in Web UI -> Accounts-> Account 1 or 2->Call Settings.
Users can find the configuration in Web UI -> Settings ->Preferences-> Ringtone.
· Functionality This feature could let the user Configure the Account Ringtone and System Ringtone from the dropdown list from the web UI instead of LCD.
· New P Values
Pvalue Description
104
Account Ringtone (Account1)
423
Account Ringtone (Account2)
8398 Default Ringtone
Value range (Check device config template) (Check device config template) (Check device config template)
Default Default Ringtone Default Ringtone Default Ringtone
SIP Timer B and Timer F Timeout · Web Configuration Users can find the configuration in Web UI -> Accounts-> Account 1 or 2->SIP Settings -> Basic Settings.
· Functionality This feature could let the user set the interval of SIP Timer B and Timer F Timeout. It is used to set the
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 13
timeout of INVITE transactions. · New P Values
Pvalue Description 60074 SIP Timer B Timeout (Account 1)
60174 SIP Timer B Timeout (Account 2)
60075 SIP Timer F Timeout (Account 1)
60175 SIP Timer F Timeout (Account 2)
Value range 0 and 2 -128 (If set to 0, the parameter will not take effect.) 0 and 2 -128 (If set to 0, the parameter will not take effect.) 0 and 2 -128 (If set to 0, the parameter will not take effect.) 0 and 2 -128 (If set to 0, the parameter will not take effect.)
Default 0
0
0
0
Wallpaper · Web Configuration Users can find the configuration in Web UI -> Settings -> LCD Display.
· Functionality This feature could let the user set the location where wallpapers are stored, the directory or file path of wallpaper, and upload the Wallpaper from WebUI.
· New P Values Pvalue Description 2916 Wallpaper Source
Value range 0 Default 1 Download 2 Uploaded
Default 0 Default
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 14
2917 Wallpaper Server Path Upload Wallpaper
String
Null
Max length: 512
Upload bottom
LED Control Users can find the configuration in Web UI -> Settings -> LCD Display.
· Functionality
This feature could let the user control the LED pattern status in Incoming Call, Missed Call, Charging In
Progress, Charging Complete, Voice Message Waiting, Instant Message Waiting.
· New P Values
Pvalue Description
Value range
Default
82285 Disable Incoming Call LED Pattern
0 No
0 No
1 Yes
82286 Disable Missed Call LED Pattern
0 No
0 No
1 Yes
82287 Disable Charging LED Pattern
0 No
0 No
1 Yes
82288 Disable Fully Charged LED Patter
0 No
0 No
1 Yes
82289 Disable Voicemail LED Pattern
0 No
0 No
1 Yes
82290 Disable Message LED Pattern
0 No
0 No
1 Yes
Factory Reset Security Level Users can find the configuration in Web UI -> Maintenance-> Security Settings-> Security.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 15
· Functionality This feature could let the user allow Factory Reset under certain security constraints.
· New P Values Pvalue Description 22373 Factory Reset Security Level
Value range 0 Default 1 Always Require Password 2- No Password Required
Default 0 Default
Disable Firmware Upgrade Confirmation Users can find the configuration in Web UI -> Maintenance -> Upgrade and Provisioning.
· Functionality This feature could let the user disable the Firmware Upgrade confirmation popup.
· New P Values Pvalue Description 84988 Disable Firmware Upgrade Confirmation
Value range 0 No 1 Yes
Default 0 No
Notification Beep Users can find the configuration in Web UI -> Settings ->Preferences-> Ringtone.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 16
· Functionality This feature could let the user disable the Wi-Fi notification Beep and the Charging Beep.
· New P Values Pvalue Description 82296 Disable Firmware Upgrade Confirmation
82297 Disable Charging Beep
Value range 0 No 1 Yes 0 No 1 Yes
Default 0 No
0 No
SIP Message Alert Repeat Count Users can find the configuration in Web UI -> Settings ->Preferences-> Ringtone.
· Functionality This feature could let the user set how many times the alert tone is played when receiving a new message.
· New P Values Pvalue Description 82306 SIP Message Alert Repeat Count
Value range Number: 0 - 32
Default 0
Maximum Number of SIP Request Retries · Web Configuration Users can find the configuration in Web UI -> Accounts-> Account 1 or 2-> Network Settings
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 17
· Functionality This feature could let the user specify the maximum number of retries on SIP Requests.
Pvalue 60055
60155
Description Maximum Number of SIP Request Retries (Account 1) Maximum Number of SIP Request Retries (Account 2)
Value range Number: 1 - 5
Number: 1 - 5
Default 4
4
Failback Timer Users can find the configuration in Web UI -> Accounts-> Account 1 or 2-> Network Settings.
· Functionality This feature could let the user specify the time interval (in minutes) that the device should continue to send SIP requests (REGISTER or INVITE) to the failover IP. Specifies the time interval (in minutes) that the device should continue to send SIP requests (REGISTER or INVITE) to the failover IP.
Pvalue Description 60056 Failback Timer (Account 1)
Value range
Default
Number: 1 - 64800 60
60156 Failback Timer (Account 2)
Number: 1 - 64800 60
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 18
FIRMWARE VERSION 1.0.11.22
PRODUCT NAME
WP810, WP822, WP825
DATE
09/01/2022
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: 16426a1e4cab13f4a2678b60fd473101
ENHANCEMENT
· Added support for gen2 certificate upgrade. (Web UI->Status->System Info->Certificate Type: RSA+SHA256)
· Added support for Dutch language. (Web UI->Settings->Preference->Language->Display Language-> "Deutsch")
· Added new feature to disable redial with # key. [Disable Key As Send Redial] · Added new feature to support for OpenVPN. [OpenVPN® Settings] · Added ability to automatically switch to RTP/SRTP according to SIP transport when it's resolved with
NAPTR. (Web UI>Accounts-> Account 1 or 2-> Audio Settings-> SRTP Mode->"Follow SIP Transport") · Added support to enable the headset detect pin without having to open the codec.
BUG FIX
· Fixed a bug causes missing open-source licenses on WebUI. · Fixed device only the first letter of the key can be entered in the search box of the Contacts APP. · Fixed device has certain probability causes LCD does not pop-up while taking USB upgrade. · Fixed device cannot detect the headset when the headset plugged in during device startup. · Fixed a bug causes WP822 and WP825 gravity sensor failed. · Fixed device chooses to mute when the second call is connected, and the first call will also be muted
at the same time. · Fixed device the "Rx Drop Rate" of Network Statistics displays error on LCD. · Fixed a bug causes network status does not display IPv4 address. · Fixed the busy tone is only played from handset audio mode. · Fixed WP822 fails to register after reboot while configured statically IPv6 address. · Fixed WP822 fails to hear audio after being transferred · Fixed the issue cause font for the password entry is unreadable after disables hide password on WP825
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 19
and WP822 LCD screen. · Fixed device cannot apply the configuration after initiating the zero-config provisioning. · Fixed Network status page not displayed VPN IP on LCD after the device connected to OpenVPN. · Fixed Network status page not displayed VPN IP on WebUI after the device connected to OpenVPN. · Fixed the VPN address has still initiated registration after closing VPN. · Fixed WP822 fails to update caller ID when the call is transferred. · Fixed WP822 Redundancy backoff timer is not accurate. · Fixed device unrecognized options are handled incorrectly when uploading .ovpn file · Fixed WP810 accidental speaker mode when using speed dial · Fixed devices receive another incoming call when there is calling in vibration mode, cause the phone
to vibrate all the time.
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use them from the user's point of view.
Disable Key As Send Redial · Web Configuration Users can find the configuration in Web UI -> Accounts-> Account 1 or 2->Call Settings
· Functionality
This new feature could disable the redial function of the Key As Send key.
· New P Values
Pvalue Description
Value range
84985 Disable Key As Send Redial (Account 1)
0 No
1 Yes
84986 Disable Key As Send Redial (Account 2)
0 No
1 Yes
OpenVPN® Settings · Web Configuration Users can find the configuration in Web UI -> Network-> OpenVPN® Setting.
Default 0 No
0 No
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 20
· Functionality This feature allows users to configure OpenVPN.
· New P Values
Pvalue Description
7050
OpenVPN® Enable
22292 OpenVPN® mode
7051 7052
OpenVPN® Server Address
OpenVPN® Port
Value range 0 No 1 Yes 0 Simple Mode 1 Expert Mode
Number: 1 to 65535
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Default 0 No 0 Simple Mode NULL 1194
Page 21
2912
OpenVPN® Transport
0 UDP 1 TCP
8396
8394 8395 8508 8460
OpenVPN® Cipher Method
OpenVPN® Username OpenVPN® Password OpenVPN® Comp-lzo Additional Options
0 Blowfish 1 AES-128 2 AES-256 3 Triple-DES Max length: 32
Max length: 32
0 No 1 Yes Max length: 2048
0 - UDP 0 Blowfish
NULL NULL 1 Yes Null
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 22
FIRMWARE VERSION 1.0.11.20
PRODUCT NAME
WP810, WP822, WP825
DATE
08/02/2022
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: abc946146b300261dad44e410eafe88b
ENHANCEMENT
· Added new feature to support capture SSL Key Log File [With Secret Key Information] · Added new features in Packet Capture monitor mode support. [Capture in Monitor Mode] · Added 3CX Auto Provision option. [3CX Auto Provision] · Added support to connect up to 20 SSIDs. (Add SSID 11 to 20) · Updated phonebook display to show first name and then family name under contacts. · Added door system support and GDS settings [Grandstream Door System]. · Added support for warning tone upon auto answer. · Added support for Off-hook Auto Dial. [Off-hook Auto Dial] · Added support for Audio Control. [Audio Control]
BUG FIX
· Fixed device plays only once for Alternate Number Ringing. · Fixed device plays only once for Priority Alert Ringing. · Fixed device does not prompt for username and password after receiving 401 for config file download. · Fixed an issue that cause the device unable to downgrade firmware via uploading on Web UI. · Fixed device sends re-register right after successful 1st register upon reboot. · Fixed text cut-off for Firmware Upgrade options on the LCD. · Fixed an issue cause the device to display the transfer icon if the "call forward" feature is enabled
without the target number. · Fixed a bug while dialing the number on the contacts page, after hanging up the call, the device will
exit to the menu page. · Fixed a bug while accessing the contact ringtone page from the dialing page, and the dial tone will
sound from the speaker while listening to the ringtone. · Fixed device only rings the bell once when adjusting the volume during an incoming call. · Fixed a bug that causes device not to display the LDAP contacts.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 23
· Fixed a bug that causes DHCP to release to performed when Minimum RSSI or Band Steering is configured on AP.
· Fixed the device acceleration sensor is always active. · Fixed device no ringtone for incoming calls if selects the "Default Ringtone" option. · Fixed device when new FW is available or the battery is low, prompts are repeatedly shown after boot. · Fixed device allows configuring call forward from LCD when both Feature Key Synchronization and
Local Call Feature are disabled. · Fixed device the advice of charges does not show final charge summary correctly. · Fixed device Caller ID display didn't update correctly during call forward from calling screen to call in
progress. · Fixed device Silent alerting not working. · Fixed a bug causing must press "Blind" twice to complete the transfer before answering. · Fixed device unable to change the Wi-Fi Band in the Italian language. · Fixed device SIP log does not show complete SIP information. · Fixed a bug caused devices unable to downgrade firmware via uploading on Web UI
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use them from the user's point of view.
With Secret Key Information · Web Configuration Users can find the configuration in Web UI -> Maintenance-> Packet Capture
· Functionality
This new feature could make packet capture include secret key to decrypt the capture TLS packets.
· New P Values
Pvalue Description
Value range
Default
22419 With Secret Key Information
0 No
1 Yes
1 Yes
Capture in Monitor Mode · Web Configuration Users can find the configuration in Web UI ->Maintenance-> Packet Capture.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 24
· Functionality
This new feature could let user configures make the packet capture in monitor mode with specific Channel
and bandwidth.
· New P Values
Pvalue Description
Value Range
Default
82265 Capture in Monitor Mode
0 - No
0 - No
1 - Yes
82266 Monitor Mode Channel
Number: 1 to 11, 1 - 1
36,40,44,48,149,1
51,153, 155, 157,
159, 161, 165
82267 Monitor Mode Bandwidth
0 - 20 MHz
0 20 MHz
1 - 40 MHz
3CX Auto Provision · Web Configuration Users can find the configuration in Web UI -> Maintenance-> Upgrade and Provisioning
· Functionality
This new feature could make the phone will multicast SUBSCRIBE for provision if this feature is enabled.
· New P Values
Pvalue Description
Value Range
Default
1414 3CX Auto Provision
0 No
1 Yes
1 Yes
Grandstream Door System · Web Configuration Users can find the configuration in Web UI ->Settings-> External Service.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 25
· Functionality This new feature could let the user connect the Grandstream Door System (GDS) with the WP8xx device. · New P Values
Pvalue 32000 32005 32010 32015 32020 32025 32030 32035 32040 32045 32001 32006 32011 32016 32021 32026 32031 32036 32041
Description Service Type (Order 1 to 10)
Account (Order 1 to 10)
Value Range -1 None 0 - GDS
Default -1 - None
0 Account 1 1 Account 2
0 Account 1
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 26
32046
32002 System Identification (Order 1 to 10)
String
Null
32007
32012
32017
32022
32027
32032
32037
32042
32047
32003 System Number (Order 1 to 10)
String
Null
32008
32013
32018
32023
32028
32033
32038
32043
32048
32004 Access Password (Order 1 to 10)
String
Null
32009
32014
32019
32024
32029
32034
32039
32044
32049
Off-hook Auto Dial · Web Configuration Users can find the configuration in Web UI ->Settings-> Call Features
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 27
· Functionality
This new feature could let the user configures the digits to be dialed via the first account when the phone
is off-hook and defines the timeout (in seconds) for the off-hook auto dial.
· New P Values
Pvalue Description
Value Range
Default
71
Off-hook Auto Dial
String: 0 to 512
Null
8388 Off-hook Auto Dial Delay
Number: 0 to 30
4
Audio Control · Web Configuration Users can find the configuration in Web UI ->Settings-> General Settings > Preferences> Audio Control
· Functionality This new feature could let user configures Headset Noise Shield 2.0. When enabling the Noise Shield feature, it creates a virtual "noise shield" which blocks the sounds outside. When the value is set to "high" power, the shield is created closer to the user which filters more noise. When the value is set to "low" power, the shield is created further from the user which filters less noise.
· New P Values Pvalue Description 8563 Headset Noise Shield 2.0
8538 Handset Noise Shield 2.0
Value Range 0 Disable 3 Low 1 Medium 2 - High 0 Disable 2 Low 1 - High
Default 1 Medium
1 High
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 28
FIRMWARE VERSION 1.0.11.8
PRODUCT NAME
WP810, WP822, WP825
DATE
05/17/2022
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: 6b0d1ee58e28ab55182bd75feaf5b2dd
ENHANCEMENT
· Added new option "Enable TCP Keep Alive". [Enable TCP Keep Alive] · Added new option to enable/disable "Off-cradle Pickup". [Off-cradle Pickup] · Added new option to enable/disable call end tone. [Disable Call End Tone]
BUG FIX
· Fixed MWI LED stops flashing after closing VM popup in Zoom. · Fixed device will display another empty prompt after the user closes the voicemail notification prompt
in Zoom. · Fixed device registers with private IP with STUN settings in BroadSoft platform. · Fixed call gets disconnected after over 30 mins due to MEDIA_TIMEOUT in Zoom. · Fixed device spoofing the network with the router's MAC address. · Fixed account does not send registration after user configures some parameters in Account 2. · Fixed device cannot select custom ring1.bin after it's uploaded. · Fixed device unable to receive DHCP on 802.1x. · Fixed call flip pickup not working in Zoom. · Fixed device cannot successfully make call when turning on Zoom special mode. · Fixed attend transfer is abnormal in 3CX. · Fixed call forward 302 format is not accepted by Zoom. · Fixed device cannot make calls when using LDAP. · Fixed device custom ringtone going silent after a few days.
KNOWN ISSUES
· Under device LCD menu->Diagnostics, ATE Video is not working for regular user. It's added temporary and will be removed in future release.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 29
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use them from the user's point of view.
Enable TCP Keep Alive · Web Configuration Users can find the configuration in Web UI -> Accounts-> Account 1 or 2-> Basic Settings.
· Functionality
This new feature supports disabling TCP keep alive for the respective SIP account when the account
protocol uses TCP/TLS.
· New P Values
Pvalue Description
Value range
Default
60065 Enable TCP Keep Alive (Account 1)
0 No
0 No
1 Yes
60165 Enable TCP Keep Alive (Account 2)
0 No
0 No
1 Yes
Off-cradle Pickup · Web Configuration Users can find the configuration in Web UI -> Settings-> Call Features.
· Functionality This new feature could let users control to answer the call when the handset is picked up from the cradle. Users can enable the Off-cradle Pickup feature to automatically answer incoming calls after picking up WP810 Handset from its cradle. · New P Values
Pvalue Description 82262 Off-cradle Pickup
Value range 0 No 1 Yes
Disable Call End Tone · Web Configuration Users can find the configuration in Web UI -> Settings-> Call Features.
Default 1 Yes
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 30
· Functionality This new feature could let users control the toggle of prompt tone when the call is ended.
· New P Values Pvalue Description 82263 Disable Call End Tone
Value range 0 No 1 Yes
Default 0 No
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 31
FIRMWARE VERSION 1.0.11.2
PRODUCT NAME
WP810, WP822, WP825
DATE
04/06/2022
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: aa2712962fd0d2e749396ad0135219a1
ENHANCEMENT · Added support for disable in-call DTMF display. [Disable in-call DTMF Display]
BUG FIX
· Fixed device a codec bug causes no audio on call. · Fixed the Ringtones dropdown list does not show on the WEB UI. · Fixed the issues of the letter when using the German language. · Fixed the option item on the LCD cannot be cycled change in Settings. · Fixed a bug cause the French language does not take effect on the WEB UI. · Fixed an issue cause device does not show the ring page after receiving an incoming call. · Fixed some options in "Call Forward" that could not display correctly on the LCD. · Fixed an issue cause the conferees' device does not hang up after the host device hangs up during the
conference. · Fixed device enabled SRTP and sets up a conference, the one conferee device could make noise.
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use them from the user's point of view.
Disable in-call DTMF Display · Web Configuration Users can find the configuration in Web UI -> Settings-> Call Feature.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 32
· Functionality This new feature could control the display of DTMF in-call, when set to "Yes", the DTMF digits entered during the call will not display.
· New P Values
Pvalue Description
338
Disable in-call DTMF Display
Value range 0 No 1 Yes
Default 0 No
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 33
FIRMWARE VERSION 1.0.9.23
PRODUCT NAME
WP810
DATE
03/07/2022
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: be789a604039369058ce2f69b0f03939
ENHANCEMENT
· Added "Zoom" option in Special Feature. (Account 1 or 2-> SIP Settings ->Advanced Features) · Added Support in SRTP requirements for Zoom. · Added support for WPA3 Wi-Fi security (Network->WiFi Settings-> SSID{x}->Security->Security Type->
WPA3 PSK/WPA3 Enterprise) · Added support for LDAP configuration. [LDAP] · Added support for Allow Dial Through Popups. [Allow Dial Through Popups] · Added option "Use MAC Header" for account 1 and account 2. [Use MAC Header] · Updated option "Use MAC Header" to "Add MAC in User-Agent" for account 1 and account 2. [Add
MAC in User-Agent] · Added support busy tone configuration to the web GUI. (Settings ->Preferences-> Ringtone) · Added support prompt tone when the call is ended. · Improved DNS SRV Failover design. · Added Support for 5G or 2.4G Wi-Fi icon to indicate which band the device is currently using. [5G or
2.4G Wi-Fi icon indicate]
BUG FIX
· Fixed device sends DHCP decline after DHCP ACK which cause update the IP address constantly. · Fixed device PTT function could not work normally after adjusted volume key. · Fixed the issue that sometimes device could not make or receive calls due to device does not send
registration package correctly. · Fixed the bug cause device may not talk normally when set codes are G729A/B and OPUS if the
hardware version is 1.4A. · Fixed the device cannot wait until the screen timeout period is complete and then turn off the screen
while in the auto answer standby state. · Fixed an issue cause device LCD status page while get stuck in seconds.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 34
· Fixed an issue case DHCP option 2 does not take effect. · Fixed device still able to dial out and hear ringback tones after Wi-Fi disconnected. · Fixed device LCD GUI sometimes get stuck in minutes while deleting the call history. · Fixed the device configuration via Keypad Menu option is set to "Basic Settings Only", the LCD does
not show Basic Settings. · Fixed device does not have audio in both ways when initiating calls. · Fixed device custom ringtone going silent after a few days. · Fixed SSH2 modified upgrade via abnormally. · Fixed missed call count on LCD prompt should be the total of all missed calls. · Fixed the issues with Constraint/Basic Settings mode and Bluetooth/PTT configurations. · Fixed user cannot enter the call page if receive the incoming call and click the left and right buttons to
switch the IDLE. · Fixed iLBC voice code negotiation failed. · Fixed the WPA3 setting is reset after boot. · Fixed out-of-memory and other performance issues in certain specific scenarios. · Fixed device has noise when switching speaker on the dialing interface. · Fixed device cannot automatically obtain the SIP account on 3CX. · Fixed device multicast issues. · Fixed device sends PTT and the other devices sometimes cannot hear the sound. · Fixed the device cannot be unlocked if using a password to lock screen. · Fixed abnormal issue on the DTMF input popup stage. · Fixed device may end the call if answer the call after re-registering. · Fixed device needs to restart to take effect when setting a static IP on the web page. · Fixed the issue that notification would prevent dialing from the keypad. · Fixed device DNS provided by Router Advertisement not populated to the device. · Fixed device unable to lock PTT via GAPS on specific firmware. · Fixed DHCP Option 150 cannot handle multiple IPs. · Fixed device will dial number upon "No Key Entry Timeout". · Fixed user cannot transfer via a hotkey on the list item. · Fixed device after the configuration of the phone is modified, the original configuration will be restored
when the phone is restarted or restored from the factory. · Fixed an issue causing DHCP option 2 not to take effect. · Fixed when the "send message" is on the call history page, the device could not identify the selected
contact as the recipient. · Fixed the line status of conference member display is wrong when conference member holds the call. · Fixed the "Kick" option does not work properly. · Fixed an issue that some options take effect only after restarting the phone on the "Wi-Fi Settings" page. · Fixed device cannot enter the contact page on the transfer and new call page. · Fixed an issue causing configuring static IPv6 addresses not taking effect. · Fixed BroadSoft IOT Vendor-Hosted Redirect Service does not do the provision after connecting to Wi-
Fi.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 35
· Fixed an issue causing the Wi-Fi icon display incorrectly after modifying the Wi-Fi band. · Fixed LCD prompt "Failed to get Firmware" in a certain specific scenario. · Fixed the custom SIP headers registration issue. · Fixed LED not flashing red when there is a missed call or voicemail. · Fixed call details page is blank. · Fixed the packet loss rate of the sender is not displayed on the call details page. · Fixed the device has a low probability of no audio during the call and hangs up the call automatically. · Fixed the device at the "Audio Loopback" page, after adjusting the volume, the audio cannot be heard
normally. · Fixed "Transfer" appears in the middle of the lower part of the call screen. · Fixed the phone menu key and back key on the keyboard test page are blocked, and there is an
additional key in the middle. · Fixed device will freeze after clicking on Settings in a certain specific scenario. · Fixed the speaker and phonebook buttons of the Keypad Test are inconsistent with the actual button
layout of the device. · Fixed phone call does not play the ring back tone when it does not receive 180 response. · Fixed WP810 manual firmware upload on the web will cause out-of-memory upgrade failure. · Fixed WP810 when in the IPv6 environment, the device sends the keep-alive packet abnormally · Fixed an issue cause WP810 freezes after forgetting Wi-Fi · Fixed a bug make a call is automatically hung up · Fixed device will vibrate after unmuting the second incoming call · Fixed device when the voice channel for the first call is a speaker and the second call is answered, the
voice channel changes to the handset · Fixed device will automatically cancel the call within a few seconds after it initiates the call · Fixed a random audio issue
KNOWN ISSUES
· WP810 may not talk normally when set codes are G729A/B and OPUS if the hardware version is 1.4A.
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use them from the user's point of view.
LDAP
· Web Configuration Users can find the configuration in Web UI -> Directory -> LDAP.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 36
· Functionality
This feature allows user to configure LDAP as LDAP client.
· New P Values
P-value Description
Value range
8037
LDAP protocol
0 LDAP
1 LDAPS
8020
Server Address
String
8021
Port
Number: 1-65535
8022
Base
String: a-z, A-Z, 0-9
8023
User Name
String: a-z, A-Z, 0-9
8024
Password
String: a-z, A-Z, 0-9
8025
LDAP Number Filter
String: a-z, A-Z, 0-9
8028
LDAP Name Attributes
String: a-z, A-Z, 0-9
8029
LDAP Number Attributes
String: a-z, A-Z, 0-9
8030
LDAP Display Name
String: a-z, A-Z, 0-9
8031
Max. Hits
Number: 1 to 3000
8032
Search Timeout
Number: 0 to 80
8035
LDAP Lookup: Incoming Calls 0 Disabled
1 Enabled
8034
LDAP Lookup: Outgoing Calls 0 Disabled
1 Enabled
Default 0 LDAP
Null 389 Null Null Null Null Null Null Null 50 30 0 Disabled
0 Disabled
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 37
Use MAC Header · Web Configuration User can find the configuration in Web UI -> Account 1 or 2 -> SIP Settings -> Custom SIP Headers.
· Functionality This feature allows user to set up the MAC Header. If set to "Only for REGISTER", only the SIP message for register and unregister will contain the MAC header. If set to "Yes to All SIP", all the outgoing SIP messages will contain the MAC header. If set to "No", the MAC header will not be contained in any outgoing SIP message.
· New P Values Pvalue Description 29090 Use MAC Header (For Account 1)
29190 Use MAC Header (For Account 2)
Value range 0 No 1 Only for REGISTER 2 Yes to all SIP 0 No 1 Only for REGISTER 2 Yes to all SIP
Default 0 No
0 No
Add MAC in User-Agent · Web Configuration User can find the configuration in Web UI -> Account 1 or 2 -> SIP Settings -> Custom SIP Headers
· Functionality The form "Use MAC Header" was updated to "Add MAC in User-Agent". User If set to "Yes except REGISTER", all outgoing SIP messages will include the phone's MAC address in the User-Agent header, except for REGISTER and UNREGISTER. If set to "Yes to All SIP", all outgoing SIP messages will include the phone's MAC address in the User-Agent header. If set to "No", the phone's MAC address will not be included in the User-Agent header in any outgoing SIP messages.
· New P Values
Pvalue 26061
Description Add MAC in User-Agent (For Account 1)
26161 Add MAC in User-Agent
Value range 0 No 1 Yes except REGISTER 2 Yes to all SIP 0 No
Default 0 No
0 No
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 38
(For Account 2)
1 Yes except REGISTER 2 Yes to all SIP
Allow Dial Through Popups · Web Configuration User can find the configuration in Web UI -> Setting -> SIP Settings -> General Settings
· Functionality This new feature allows user to dial DMTF through Popups.
· New P Values Pvalue Description 82261 Allow Dial Through Popups
Value range 0 No 1 Yes
5G or 2.4G Wi-Fi Icon Indication · LCD Screen Preview
Default 0 No
2.4GHz Wi-Fi
5GHz Wi-Fi
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 39
FIRMWARE VERSION 1.0.7.83
PRODUCT NAME
WP810
DATE
07/27/2021
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: 4141c0a55db6aaa96b9f04566fb7de64
BUG FIX
· Fixed when NAT Traversal set to Keep-Alive, after switching SSID and got a new IP address, WP810 still uses the old IP address to send classic stun keep-alive packets to the SIP server.
· Fixed if the SIP server changed the IP address of the contact line, WP810 will continuously send binding requests to the SIP server.
· Fixed WP810 works abnormally if switched SIP registration between Yes and No. · Fixed WP810 cannot scan after roam. · Fixed when auto answer is enabled on WP810, WP810 may freeze in the call interface. · Fixed call loose audio/drop when roaming between Ubiquiti AC-PRO AP. · Fixed when transferring, WP810 refer the current line to the target line instead of referring the target
line to the current line. · Fixed after entering the lock screen password, WP810 may freeze on the lock screen password page. · Fixed the lock screen background image overlaps with the main page · Fixed WP810 does not need a password to connect to the USB serial port. · Fixed XML Phonebook cannot be downloaded using the "Download XML Phonebook" option. · Fixed contacts could not be displayed successfully in Firefox browser. · Fixed when WP810 starts packet capture using the Packet Capture feature, it may stop capture
automatically during roaming. · Fixed WP810 may stuck in the boot interface when restarts. · Fixed WP810 Network Status page does not display the DNS Server information. · Fixed WP810 cannot auto provision against UCM Zero Config · Fixed after WP810 configuration was modified, a restart or a factory reset will restore to the previous
settings. · Fixed DHCP renew during band steering. · Fixed WP810 white screen. · Fixed Maximum TLS Version unlimited option does not take effect.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 40
· Fixed when Minimum TLS Version is set to TLS 1.1 and Maximum TLS Version is set to Unlimited, WP810 use TLS1.1 only.
· Fixed Call History call records date and time do not match the system time.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 41
FIRMWARE VERSION 1.0.7.68
PRODUCT NAME
WP810
DATE
04/23/2021
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: 268aa267a49e7d424082cc9922905025
ENHANCEMENT
· Added support for GDMS. · Added support for letters with accent. · Added support to differentiate rejected calls icon from missed calls. Now the rejected calls will be logged
as received calls with different icon. · Added support for Turkish language. · Update Wi-Fi Security type from "WPA PSK" to "WPA/WPA2 PSK". · Added support for "Feature Key Synchronization" [FEATURE KEY SYNCHRONIZATION]. · Added support for "Capture" [CAPTURE] · Added support for "Matching Incoming Caller ID". [MATCH INCOMING CALLER ID] · Added support for TR-069 configuration. [TR-069] · Added support for "Configuration via Keypad Menu". [CONFIGURATION VIA KEYPAD MENU] · Added support for "Register Before DNS SRV Failover". [REGISTER BEFORE DNS SRV FAILOVER] · Added support for Minimum and Maximum TLS Version configuration. [TLS VERSION] · Added support for 802.11r. [802.11r] · Add hardware version to the provision user agent. · Added support to configure Country Code while configuring Wi-Fi from handset on the first time. · Added support to display contacts with no numbers in the phonebook. · Added Japanese language support on LCD. · Remove edit contact ringtone from Web UI. · Networking improvements to handle rapid Wi-Fi connection changes. · Improved key handling and greatly lower the chance that the screen may not light up when the user
presses a button at the first time. · Improved Wi-Fi disconnect popup message.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 42
BUG FIX
· Fixed the keypad could not be locked by pressing the pound key for 3 seconds. · Fixed Wi-Fi disconnects during roaming. · Fixed when Time Display Format is set to 12 Hour, the "12:00 AM" is shown as "0:00 AM". · Fixed syslog not working in IPv6 only Mode. · Fixed the Preferred DNS Server does not take effect when IPv6 address length is more than 24 bits. · Fixed ring and alerts may not be able to play back. · Fixed in IPv6 mode, WP810 ignores received 200 OK response to SIP Op. · Fixed issue vibration function does not work. · Fixed when WP810 enable Auto Answer, may have one-way audio issue. · Fixed WP810 could not authenticate to SSID when using WPA/WPA2 Enterprise PEAP MSCHAPv2 · Fixed WP810 cannot enter "+" by long pressing the 0 key. · Fixed WP810 cannot select which number to dial from the phonebook for a contact with multiple phone
numbers, only be able to dial the one set as primary. · Fixed multiple time zone return wrong time which are where the time is advanced with 1 hour more
than actual time zone. · Fixed the predefined time zone GMT+1 display wrong time. · Fixed SIP responds slowly when answering calls. · Fixed WP810 could not resolve DNS query when DNS reply contains more than one IP addresses. · Fixed WP810 took up to 30 seconds to register account after rebooting. · Fixed voicemail is played on speaker when calling from Voicemail menu. · Fixed WP810 could not connect to default SSID "wp_master" when it is hidden. · Fixed Capture function may not work if Syslog Server left blank. · Fixed the LCD still shows registered after Account Active is set to No. · Fixed after switching SSID, sometimes can not access the connection page of other SSID from GUI. · Fixed that GUI may crash when refreshing scanned SSIDs. · Fixed when current connected SSID out of range, WP810 will not switch to another SSID automatically. · Fixed only power key and volume up/down key work. · Fixed when current connected SSID out of range and WP810 enter new SSID discovery mode, the
ongoing call will not be hung up automatically. · Fixed when kill wp_gui, the account will show gray. · Fixed GUI may freeze on the white screen interface. · Fixed device cannot connect to SSIDs when the password contains & special character. · Fixed device keeps disconnecting from Wi-Fi randomly. · Fixed that when the SSID of the WP810 connection is closed, WP810 may still show the connection
and has an IP address. · Fixed when Internet Protocol set to IPv6 Only, after DUT reboot, the accounts will not register
successfully. · Fixed WP810 may freeze after forgetting Wi-Fi.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 43
KNOWN ISSUES
· When capturing trace via GDMS using Capture Trace tool, the capture file could not be opened normally.
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user's point of view.
REGISTER BEFORE DNS SRV FAILOVER · Web Configuration User can find the configuration in Web UI -> Accounts -> Network Settings.
· Functionality
Now the users can choose the behavior for registering before DNS SRV Fail-over
- If set to "No", a REGISTER request will not be initiated when a server failover occurred under DNS
SRV mode.
- If set to "Yes", a REGISTER request will be initiated when a server failover occurred under DNS SRV
mode.
· New P Values
Pvalue Description
Value range
Default
29095 Register Before DNS SRV Failover (Account 1) 0 No
0 No
1 Yes
29195 Register Before DNS SRV Failover (Account 2) 0 No
0 No
1 Yes
TLS VERSION · Web Configuration User can find the configuration in Web UI -> Maintenance -> Security Settings -> Security.
· Functionality
This feature allows users to choose the TLS version for HTTPS provisioning."
· New P Values
Pvalue Description
Value range
22293 Minimum TLS Version
99 Unlimited
Default 99 Unlimited
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 44
22294 Maximum TLS Version
10 TLS 1.0 11 TLS 1.1 12 TLS 1.2 99 Unlimited 10 TLS 1.0 11 TLS 1.1 12 TLS 1.2
99 Unlimited
FEATURE KEY SYNCHRONIZATION · Web Configuration User can find the configuration in Web UI -> Accounts -> SIP Settings -> Advanced Features.
· Functionality
This feature is used for BroadSoft call feature synchronization. When it is enabled, DND, Call Forward
features can be synchronized between BroadSoft server and phone. When use this feature, Special Feature
need to set to BroadSoft. Default is "Disabled"
· New P Values
Pvalue Description
Value range
Default
2325 Feature Key Synchronization (Account 1) 0 Disabled
0 Disabled
1 Enabled
2425 Feature Key Synchronization (Account 2) 0 Disabled
0 Disabled
1 Enabled
CAPTURE · Web Configuration User can find the configuration in Web UI -> Maintenance -> Syslog.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 45
· Functionality This feature allows user to capture additional Syslog while Syslog Level is set to DEBUG. Capture can be stored either internally on the device or externally on a USB flash drive via a OTG cable. It supports two Capture Mode: Timed and Continuous.
- Timed Mode: When a new capture is run, the previous files are deleted. Capture Timer is optional, if choose Internal Storage, the maximum Capture Timer limit is 30 minutes. Log File Rotation will maintain a fixed maximum limit of the file size based on the Max Log File Size and Max Log Files configured. Old logs will be deleted when rotated.
- Continuous Mode: This mode allows device to capture logs continuously during the days set under Continuous Capture Days option.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 46
· New P Values Pvalue Description 82250 Capture Location
82255 USB Filename
82259 Capture Mode
82253 Capture Timer 82254 Log File Rotation
82251 82252 82257
Max Log File Size Max Log Files Enabled
82258 Continuous Capture Days
Value range 0 Internal Storage 1 USB String 0 64 0 Timed 1 - Continuous 0 2000 0 No 1 Yes 1 10 1, 2, 3 0 No 1 - Yes 1 1 Day 2 2 Days 3 3 Days 4 4 Days 5 5 Days 6 6 Days 7 7 Days 8 8 Days 9 9 Days 10 10 Days 11 11 Days 12 12 Days 13 13 Days 14 14 Days
MATCH INCOMING CALLER ID · Web Configuration User can find the configuration in Web UI -> Accounts -> Call Settings.
Default 0 Internal Storage
Null
0 Timed
30 1 Yes
1 3 0 No
1 1 Day
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 47
· Functionality
Specifies matching rules with number, pattern or Alert Info text (up to 10 matching rules). When the incoming
caller ID or Alert Info matches the rules, the phone will ring with selected distinctive ringtone. Select the
distinctive ring tone for the matching rule. When the incoming caller ID or Alert Info matches one of the 10
rules, the phone will ring with associated ringtone.
· New P Values
Pvalue Description
Value
Default
range
1488 Matching Rule 1 (Account 1)
String
Null
0 512
1489 Matching Rule1 Distinctive Ringtone (Account 1) Number 0 Default Ringtone
1490 Matching Rule 2 (Account 1)
String
Null
0 512
1491 Matching Rule 2 Distinctive Ringtone (Account 1) Number 0 Default Ringtone
1492 Matching Rule 3 (Account 1)
String
Null
0 512
1493 Matching Rule 3 Distinctive Ringtone (Account 1) Number 0 Default Ringtone
6716 Matching Rule 4 (Account 1)
String
Null
0 512
6717 Matching Rule 4 Distinctive Ringtone (Account 1) Number 0 Default Ringtone
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 48
6718
6719 6720
6721 26064
26065 26066
26067 26068
26069 26096
26097 1494
1495 1496
1497 1498
1499 6722
6723 6724
6725 6726
6727 26164
26165 26166
Matching Rule 5 (Account 1)
Matching Rule 5 Distinctive Ringtone (Account 1) Matching Rule 6 (Account 1)
Matching Rule 6 Distinctive Ringtone (Account 1) Matching Rule 7 (Account 1)
Matching Rule 7 Distinctive Ringtone (Account 1) Matching Rule 8 (Account 1)
Matching Rule 8 Distinctive Ringtone (Account 1) Matching Rule 9 (Account 1)
Matching Rule 9 Distinctive Ringtone (Account 1) Matching Rule 10 (Account 1)
Matching Rule 10 Distinctive Ringtone (Account 1) Matching Rule 1 (Account 2)
Matching Rule1 Distinctive Ringtone (Account 2) Matching Rule 2 (Account 2)
Matching Rule 2 Distinctive Ringtone (Account 2) Matching Rule 3 (Account 2)
Matching Rule3 Distinctive Ringtone (Account 2) Matching Rule 4 (Account 2)
Matching Rule 4 Distinctive Ringtone (Account 2) Matching Rule 5 (Account 2)
Matching Rule 5 Distinctive Ringtone (Account 2) Matching Rule 6 (Account 2)
Matching Rule 6 Distinctive Ringtone (Account 2) Matching Rule 7 (Account 2)
Matching Rule 7 Distinctive Ringtone (Account 2) Matching Rule 8 (Account 2)
String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String 0 512 Number String
Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone Null
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 49
26167 26168
26169 26196
26197
Matching Rule 8 Distinctive Ringtone (Account 2) Matching Rule 9 (Account 2)
Matching Rule 9 Distinctive Ringtone (Account 2) Matching Rule 10 (Account 2)
Matching Rule 10 Distinctive Ringtone (Account 2)
0 512 Number String 0 512 Number String 0 512 Number
TR-069 · Web Configuration User can find the configuration in Web UI -> Maintenance -> TR-069.
0 Default Ringtone Null
0 Default Ringtone Null
0 Default Ringtone
· Functionality This feature allows user to configure TR-069. · New P Values
Pvalue Description 1409 Enable TR-069
4503 4504 4505 4506
ACS URL TR-069 Username TR-069 Password Periodic Inform Enable
Value range 0 No 1 Yes String String: a-z, A-Z, 0-9 String: a-z, A-Z, 0-9 0 No
Default 1 Yes
https://acs.gdms.cloud Null Null 1 Yes
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 50
4507 4511 4512 4518 8220 8221 8487
Periodic Inform Interval Connection Request Username Connection Request Password Connection Request Port CPE SSL Certificate CPE SSL Private Key Randomized TR069 Startup
1 Yes Number String: a-z, A-Z, 0-9 String: a-z, A-Z, 0-9 Number String: a-z, A-Z, 0-9 String: a-z, A-Z, 0-9 0 Disabled 1 Enabled
86400 Null Null 7547 Null Null 0 Disabled
CONFIGURATION VIA KEYPAD MENU · Web Configuration User can find the configuration in Web UI -> Maintenance -> Security Settings -> Security.
· Functionality Each mode working as below:
1. Unrestricted: All Settings are accessible in keypad menu 2. Basic settings only: Call Features and Basic Settings are accessible in keypad menu, Account
settings, Network, and Advanced Settings are hidden from keypad menu. 3. Constraint Mode: Administration password will be required to access Account, Network and
Advanced Settings. Call Features and Basic Settings can be accessed directly in keypad menu. 4. Locked Mode: Settings menu cannot be accessed via keypad menu. PTT quick configuration
page cannot be accessed by using the multi-function key. 5. Basic and Network Settings: Call Features, Network, and Basic Settings are shown normally in
keypad menu, Account and Advanced Settings are hidden from keypad menu.
· New P Values Pvalue Description 1357 Configuration via Keypad Menu
Value range 0 Unrestricted 1 Basic settings only 2 Constraint Mode 3 Locked Mode 4 Basic and Network Settings
Default 0 Unrestricted
802.11r · Web Configuration User can find the configuration in Web UI -> NETWORK -> WiFi Settings.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 51
· Functionality This feature allows user to use 802.11r. · New P Values
Pvalue Description 83048 802.11r (SSID 1)
83148 802.11r (SSID 2)
83248 802.11r (SSID 3)
83348 802.11r (SSID 4)
83448 802.11r (SSID 5)
83548 802.11r (SSID 6)
83648 802.11r (SSID 7)
83748 802.11r (SSID 8)
83848 802.11r (SSID 9)
83948 802.11r (SSID 10)
Value range 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled 0 Disabled 1 Enabled
Default 0 Disabled 0 Disabled 0 Disabled 0 Disabled 0 Disabled 0 Disabled 0 Disabled 0 Disabled 0 Disabled 0 Disabled
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 52
FIRMWARE VERSION 1.0.7.18
PRODUCT NAME
WP810
DATE
07/15/2020
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: c71f0fbcc9cf3c432a610546d8ab7113
ENHANCEMENT
· Added support for Slovak and Czech language. · Added support for Polish language on LCD. · Added support to download a phonebook from the server. [PHONEBOOK DOWNLOAD S] · Added support for "Disable Recovery on Blind Transfer". [DISABLE RECOVERY ON BLIND
TRANSFER] · Added support to provision Account Ringtone.
BUG FIX
· Fixed WP810 will not send DHCPv6 solicit message. · Fixed "No Key Entry Timeout" does not work. · Fixed blind transfer does not work with MetaSwitch platform. · Fixed "Transfer on Conference Hangup" does not work correctly with MetaSwitch platform. · Fixed WP810 could not get an inbound call when Internet Protocol is set to "Both, prefer IPv6" or "IPv6
Only". · Fixed WP810 will not be able to make any call after such scenario: WP810 finishes an outbound call,
then in a call with another user, during the call, WP810 make a new call to previous number. · Corrected and added some Chinese translations · Fixed when WP810 being transferred to a third party, if WP810 hang up the call while the third-party
ringing, WP810 will not be able to make any call. · Fixed when adding a new contact, if the characters of the first and last name reach a certain number,
GUI will crash.
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user's point of view.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 53
PHONEBOOK DOWNLOAD SETTINGS · Web Configuration User can find the configuration in Web UI -> Directory -> Phonebook Management.
· Functionality WP810 now supports to download the phonebook from a configured server.
· New P Values
Pvalue Description
Value range
Default
330
Enable Phonebook XML Download
0 Disabled
0 Disabled
1 Enabled, use HTTP
2 Enabled, use TFTP
3 Enabled, use HTTPS
6713 HTTP/HTTPS User Name
String
Null
6714 HTTP/HTTPS Password
String
Null
331
Phonebook XML Server Path
String
Null
332
Phonebook Download Interval
0, 5-720
0
333
Remove Manually-edited Entries on 0 No
1 - Yes
Download
1 Yes
DISABLE RECOVERY ON BLIND TRANSFER · Web Configuration
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 54
User can find the configuration in Web UI -> Accounts -> Call Settings.
· Functionality This feature allows user to disable recovery to the call to the transferee on failing blind transfer to the target.
· New P Values
Pvalue Description
Value range
2384 Disable Recovery on Blind Transfer 0 No
(Account 1)
1 Yes
2484 Disable Recovery on Blind Transfer 0 No
(Account 2)
1 Yes
Default 1 Yes
1 Yes
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 55
FIRMWARE VERSION 1.0.7.7
PRODUCT NAME
WP810
DATE
4/22/2020
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin
MD5: e855af9d416ec6abd58476f5a5a47d54
ENHANCEMENT
· Added Multicast Listening setting fields for Multicast Paging settings on web UI. [MULTICAST PAGING SETTINGS]
BUG FIX
· Fixed an issue that after remote transferred WP810 to another party, the transfer completed and audio goes through, but WP810 still display remote hold status.
· Fixed an issue that blind transfer will fail if the server sends 401 challenge to the REFER. · Fixed an issue that WP810 still play local ring even after received early media. · Fixed an issue that WP810 changes the call UI from hold to normal status after received session timer
or session audit UPDATE, while the call is still in hold. · Fixed typo in default call progress tones. · Fixed an issue that when adding new contacts, the changes can be saved even the primary number is
blank. · Corrected some Chinese translations
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user's point of view.
MULTICAST PAGING SETTINGS · Functionality WP810 now support to configure multicast listening address and labels for Multicast Paging. These new settings are under Web UI -> Settings -> Multicast Paging.
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 56
· New P Values Pvalue Description 1569 Priority 1 ~ 10 Listening Address 1571 1573 1575 1577 1579 1581 1583 1585
Value range String
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Default Page 57
1587 1570 1572 1574 1576 1580 1582 1584 1586 1588 1560
Priority 1 ~ 10 Label
String
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 58
FIRMWARE VERSION 1.0.1.1
PRODUCT NAME
WP810
DATE
4/6/2020
FIRMWARE FILE INFORMATION
· Firmware file name: wp810fw.bin MD5: 0c3550431d40c2a250dba9c634ecf4cf
· This is the Initial firmware for WP810
GRANDSTREAM NETWORKS
WP810/WP822/WP825 Release Notes
Page 59