HYBRID PRO HP-K-36 20FT Modular Backwall Kit Installation Guide
File info: application/pdf · 20 pages · 9.79MB
IS HP-K-36
36-instruction
Index of /resources
Product Specifications PDF
Hybrid Pro 20ft Modular Backwall Kit 36 Replacement Graphics | TradeShowPlus Product
Downloadable Resources
Extracted Text
Hybrid Pro 20FT Modular Backwall Kit 36 HP-K-36 Hybrid ProTM Modular Kit 36 mixes fabric, form and function! This 20ft wide dynamic display features BlazeTM Light Boxes on both ends plus MODifyTM merchandising walls and shelving. All panels have SEG push-fit fabric graphics for promotion and branding, which are easy to change out. This helps extend the longevity of the display, which can be used for both tradeshow and retail applications. features and benefits: - Silver aluminum extrusion frames - 3 light boxes, one on each end - 4 silver steel shelves and 2 silver base decks for merchandising - 5 single-sided SEG dye-sublimated push-fit fabric graphics, 3 illuminated, 2 non - Cases included: OCH2 (4) - Lifetime hardware warranty against manufacturer defects dimensions: Hardware Assembled unit: 237.28"w x 94.50"h x 29.72"d 6,027mm(w) x 2400mm(h) x 755mm(d) Approximate Weight: 488.84 lbs / 222 kg Graphics Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/ downloads/download-graphic-templates or click here We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications 7/8/2024 Shipping Packing case(s): 4 OCH2 Shipping dimensions: OCH2: (52"L x 29"H x 15"D) 1321mm(l) x 737mm(h) x 381mm(d) Approximate shipping weight: 488.84 lbs / 222 kg This product may include the following materials for recycle: aluminum, select wood, fabric, cardboard, paper, steel, and plastics. additional information: Graphic material: Dye-sublimation SEG push-fit fabric 2 person assembly recommended: HP-K-36 SETUP INSTRUCTIONS SETUP# A1 A2 A3 A13 A17 A14 A15 A16 A4 A5 HARDWARE 101-354-01-01-PW 101-1184-01-02-PW 102-1000-68 348-400-32-32 348-1200-02-32-26 348-1200-02-32-27 348-1200-02-61 348-1200-02-62 360-600-02-02 360-1200-02-32 A6 360-1200-02-32-46 A8 361-1200-02-32 A9 361-1200-02-32-69 A12 A10 A18 831-833-EC A11 BLZ-PLT-550 CB10 FH-5/16-18-1-1/4 IB2-O LED-EV-CORD-8 LED-EV-THUMB-ORB LED-EV-WHT-6000-10 LED-EV-WHT-6000-19 MFY-DB-36-17 MFY-SLF-36-12 SETUP# 824-750-49-49-50 830-1155-52-52-53 830-1155-52-52-53 831-833-EC 835-883-01-01 BLZ-PLT-550 CB10 FH-5/16-18-1-1/4 IB2-O LED-EV-CORD-8 LED-EV-THUMB-ORB LED-EV-WHT-6000-10 LED-EV-WHT-6000-19 MFY-DB-36-17 MFY-SLF-36-12 GRAPHICS A HP-36-A-G B HP-36-B-G C HP-36-C-G D HP-36-D-G E HP-36-E-G PROJECT BOM # DESCRIPTION 2 354MM LENGTH OF PH1 POWDERCOATED EXTRUSION-WITH CAM LOCKS BOTH ENDS 2 1184MM LENGTH OF PH1 POWDERCOATED EXTRUSION-WITH IB2 LOCK HOLES ONE SIDE-CAM LOCK ONE SIDE 8 1000MM LENGTH OF PH2 EXTRUSION-WITH SIDE LOCKS BOTH SIDES 4 400MM (15.75in) LENGTH OF 348 SILVER EXTRUSION-WITH MITRE CUT BOTH ENDS 3 1200MM (47.24in) LENGTH OF 348 SILVER EXTRUSION-WITH MITRE CUT LEFT END FOR CB10-IB2 LOCK HOLE RIGHT END 3 1200MM (47.24in) LENGTH OF 348 SILVER EXTRUSION-WITH MITRE CUT RIGHT END FOR CB10-IB2 LOCK HOLE LEFT END 1 1200MM (47.24in) LENGTH OF 348 SILVER EXTRUSION-WITH IB2 HOLE ONE RIGHT END-WITH MITRE LEFT END-WITH GROMMET HOLE 100MM FROM LEFT END 1 1200MM (47.24in) LENGTH OF 348 SILVER EXTRUSION-WITH IB2 HOLE ONE LEFT END-WITH MITRE RIGHT END-WITH GROMMET HOLE 1100MM FROM LEFT END 2 600MM (23.62in) LENGTH OF 360 BLAZE SILVER EXTRUSION-WITH IB2 LOCK HOLES BOTH ENDS 2 1200MM (47.24in) LENGTH OF 360 BLAZE SILVER EXTRUSION-WITH MITRE CUT FOR CB10s ONE END-IB2 LOCK HOLES ONE END 1200MM (47.24in) LENGTH OF 360 BLAZE SILVER EXTRUSION-WITH MITRE CUT FOR CB10s ONE END-IB2 LOCK HOLES ONE END-WITH 9MM DIA THRU HOLES 90MM FROM 2 LEFT END 2 1200MM (47.24in) LENGTH OF 361 BLAZE SILVER EXTRUSION-WITH MITRE CUT FOR CB10s ONE END-IB2 LOCK HOLES ONE END 1200MM (47.24in) LENGTH OF 361 BLAZE SILVER EXTRUSION-WITH MITRE CUT FOR CB10s ONE END-IB2 LOCK HOLES ONE END-WITH GROMMET HOLE- 76MM FROM 2 LEFT/BOTTOM END 4 750MM (29.53IN) LENGTH OF 824 CORNER POST EXTRUSION -WITH THRU HOLE FOR 3/8 BOLT, 38.1MM FROM END-WITH 824-EC CAP-WITH (2) MFY-LVL LEVELING FEET 4 1155MM (45.47in) OF 830 SINGLE SIDED UPRIGHT OPEN EXTRUSION 4 1155MM (45.47in) OF 830 SINGLE SIDED UPRIGHT OPEN EXTRUSION -MFY-EPIN Tapered extension pin, 5/16-18 Thread 4 7MM SEG PLASTIC END CAP FOR 831-833 EXTRUSION 4 883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS 2 Blaze foot with double countersunk holes, 3in x 550mm length 16 CB10 90 DEGREE CONNECTOR 4 ZINC-PLATED STEEL PHILLIPS FLAT HEAD SCREWS, 100 DEGREE COUNTERSINK, 5/16-18 THREAD, 1-1/4 LONG with 5/16-18 WINGNUT & FENDER WASHERS 17 JOINER BAR (OLD STYLE) 3 POWER CORD FOR AC LIGHTBAR - 8FT 56 THUMB KNOB, ORBUS VERSION, FOR LED LIGHT BAR 8 LIGHT BAR (SEG), AC POWER, 6000K, 14" L 20 LIGHT BAR (SEG), AC POWER, 6000K, 21" L 2 36"W X 17"D DROP IN BASE WITH 2" TOE KICK 4 36"W X 12"D SHELF # DESCRIPTION GRAPHIC (A) (19.63 w X 98.37 h total size ) 15.63 w X 94.37 h finish size, Dye-sub print on Backlit Textile, single sided, sewn with silicone beading around perimeter & 1 pull tab in bottom right corner LINER (B) (19.63 w X 98.37 h total size ) 15.63 w X 94.37 h finish size, Opaque Liner, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right 1 corner GRAPHIC (C) (39.26 w X 95.04 h total size ) 35.26 w X 91.04 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading 1 around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) GRAPHIC (D) (121.99 w X 98.37 h total size ) 117.99 w X 94.37 h finish size, Dye-sub print on Backlit Textile, single sided, sewn with silicone beading around perimeter 1 & pull tab in bottom right corner LINER (E) (121.99 w X 98.37 h total size ) 117.99 w X 94.37 h finish size, Opaque Liner, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right 1 corner PROJECT BOM GRAPHIC (F) (39.26 w X 95.04 h total size ) 35.26 w X 91.04 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading F HP-36-F-G 1 around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) GRAPHIC (G) (19.63 w X 98.37 h total size ) 15.63 w X 94.37 h finish size, Dye-sub print on Backlit Textile, single sided, sewn with silicone beading around perimeter & G HP-36-G-G 1 pull tab in bottom right corner LINER (H) (19.63 w X 98.37 h total size ) 15.63 w X 94.37 h finish size, Opaque Liner, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right H HP-36-H-G 1 corner FABRIC, VINYL & UV GRAPHIC CARE GUIDELINES GENERAL HANDLING FABRIC GRAPHICS � Your fabric graphics should always be handled in a clean and dry area with clean hands. When possible, use white fabric gloves. � Be sure fabric is clean and dry before packing. � Machine washing and/or drying is not recommended for all fabrics. Refer to the chart below for which fabrics are washable. EMERGENCY STAIN TREATMENT (FABRIC) 1. For dry stains, like loose dirt or pencil marks, try inititally using masking tape or Magic Eraser (dry-not moistened). 2. Introduce water or liquids to treat stains, if at all possible, treat the stain with fabric off of the frame. � Place a clean dry cloth behind stain (to absorb stains while being treated). Mositen another cloth initially with just water (distilled water is optimal, if available). � Gently blot stain with moistened cloth (or small area of moistened Magic Eraser), while trying to push stain through to the back, using the dry cloth to absorb. � Repeat using care to keep the wet area as small as possible. � Grandma's Secret Spot remover can be an effective stain remover. Mix severall drops in a small cup with clean water. Repeat above and using dry cloth on back of stain to absorb. MACHINE WASHING FABRIC GRAPHICS � Cold water/delicate cycle/tumble dry low or air dry. For stretch fabrics do not use dryer, let hang dry. � Use caution on dryer time with graphics containing liners. It's best to put tension fabric on frame when fabric is still damp and let it air dry. Always be sure that the aluminum frame is clean when mounting the damp graphic. � Fabric stretch graphics that are washed and mahcine dried may shink up to 3/4" per every 50" of fabric in the direction of the stretch and shink up to 1/4" in non stretch direction. STORING & PACKING BACKLIT GRAPHICS � To avoid cracks in the ink or having to steam graphics, Backlit fabrics should be loosely folded with bubble wrap or stored around a tube. � Avoid folding the graphic tightly to store in a small bag or box. GENERAL HANDLING VINYL & UV GRAPHICS � Vinyl banners and rigid graphics should always be handled in a clean and dry area with clean hands. When possible, use white fabric groves. � Be sure vinyl/ UV is clean and dry before packing. Always follow material handing and packing instrcutions included. � All vinyl material should be rolled with graphic facing in to protect the graphic printed side. Roll on a tube in available. � Avoid folding material to reduce the risk of crease lines and chipped inks. If a graphic must be folded, try and fold loosely and as few times as possible. EMERGENCY STAIN TREATMENT (UV) � For dry stains, like loose dirt, pencil marks or adhesive, try initially using masking tape, Masking tape can be quite effective at lifting dry surface dirt. Try 'pulling' as much of stain away as you can and avoid rubing the stain into the material. � While using Windex� avoid scrubbing harshly. Too much pressure can fade the graphic print. GENERAL HANDING OF ROLLABLE PVC PANELS All mural panels, truss panels and detachables should be rolled with the graphic facing out to protect the graphic printed side. Mural panels should be stored in the original plastic sleeves that are provided with the panels. STEAMING FABRIC GRAPHICS � For optimal results, steam wrinkles when fabric is tensioned and installed securely on the frame. � Fill steamer with clean drinking water or distilled water. Avoid using water containing hard minerals. � Hold steamer upright and hold close to fabric. Avoid touching fabric with steamer. � Do not tap steamer as water drips may cause water marks to from on graphic NON BACKLIT GRAPHICS BACKLIT GRAPHICS FABRIC RESILIENCE OXFORD POWER STRETCH DISPLAY POLYESTER DISPLY POLY TABLE THROWS OUTDOOR FLAG CANVAS OUTDOOR CANVAS LIGHTBOX AGILITY SUPER STRETCH TRIPLE WHITE ECLIPSE SOFT KNIT SHEER VINYL & ROLLABLE FLATMAXX SCRIM 13OZ/ 18OZ VINLY 20OZ MELINEX MURAL PANELS UV RIDGED WASHING MACHINE NO YES YES YES YES YES (MUST VELCRO THE TABS) NO NO YES YES YES NO YES YES DRY CLEAN NO YES YES YES YES N/A (MUST VELCRO THE TABS) NO NO YES YES YES NO YES YES SOLVENT ONLY ON WHITE ONLY ON WHITE ONLY ON WHITE NO NO NO SOAPY WATER (Dawn) YES YES YES YES YES YES SPOT CLEAN NO YES YES YES YES YES YES NO YES YES NO YES YES YES WINDEX NO NO NO NO YES YES STEAMING / IRON NO YES YES YES YES YES STEAM ONLY STEAM ONLY (ONLY W/ 100% TENSION) (ONLY W/ 100% TENSION) YES STEAM ONLY YES YES MAGIC ERASER YES (ONLY ON WHITE) YES YES YES YES YES YES YES YES YES NO YES YES YES SETUP NOTES Redesign of this exhibit without approval by Orbus may result in dangerous and unsafe structures. Nimlok disclaims any responsibility for redesigned exhibits it does not approve in writing. Parts and components such as panels and extrusions are manufactured to metric sizing. Where ever possible sizes have been noted in feet and inches as well as in metric. Below is the imperial to metric sizing table for reference. "Nominal" refers to approximate size. NOTE: PARTS MAY COME PRE-ASSEMBLIED FOR PACKING PURPOSES. * PARTS LOCKED TOGETHER PARTS IF NOT LOCKED TOGETHER * PARTS LOCKED TOGETHER * METRIC TO IMPERIAL DIMENSION 2400mm = ( 94.50" ) 2100mm = ( 82.67" ) 1800mm = ( 70.87" ) 1500mm = ( 59.05" ) 1200mm = ( 47.25" ) 900mm = ( 35.43" ) 600mm = ( 23.62" ) 300mm = ( 11.81" ) Internet Connection P Phone Line Main Electric Drop (Point Of Distribution) Electrical Outlet Sharp Edges Cables Under Carpet HELPFUL SETUP QR CODES SCAN QR CODES WITH YOUR PHONE CAMERA 3048mm [120.000"] 6096mm [240.000"] EP LED Lights How to replace an LED light fixture. STEP-1 Disconnect the lead at both ends of the LED fixture as shown. Take note of male and female ends. STEP-2 Rotate the twist clips 90 degrees at both ends to unlock and remove the fixture from the extrusion. STEP-3 Remove and replace the LED light. Be sure to match the proper male and female connectors to exisiting LED lights. 755mm [29.716"] STEP-4 STEP-5 Secure the replacement LED light with twist clips on both ends. Connect replacement LED light with existing lights. FP SETUP# CB10 A6 IB2-O A9 A5 FH-5/16-18-1-1/4 BLZ-PLT-550 A8 A2 A4 # DESCRIPTION 8 CB10 90 DEGREE CONNECTOR 1200MM (47.24in) LENGTH OF 360 BLAZE SILVER 2 EXTRUSION-WITH MITRE CUT FOR CB10s ONE END-IB2 LOCK HOLES ONE END-WITH 9MM DIA THRU HOLES 90MM FROM LEFT END 13 JOINER BAR (OLD STYLE) 1200MM (47.24in) LENGTH OF 361 BLAZE SILVER EXTRUSION-WITH MITRE CUT FOR CB10s ONE 2 END-IB2 LOCK HOLES ONE END-WITH GROMMET HOLE- 76MM FROM LEFT/BOTTOM END 1200MM (47.24in) LENGTH OF 360 BLAZE SILVER 2 EXTRUSION-WITH MITRE CUT FOR CB10s ONE END-IB2 LOCK HOLES ONE END ZINC-PLATED STEEL PHILLIPS FLAT HEAD SCREWS, 100 DEGREE COUNTERSINK, 5/16-18 THREAD, 4 1-1/4 LONG with 5/16-18 WINGNUT & FENDER WASHERS 2 Blaze foot with double countersunk holes, 3in x 550mm length 1200MM (47.24in) LENGTH OF 361 BLAZE SILVER 2 EXTRUSION-WITH MITRE CUT FOR CB10s ONE END-IB2 LOCK HOLES ONE END 1184MM LENGTH OF PH1 POWDERCOATED 2 EXTRUSION-WITH IB2 LOCK HOLES ONE SIDE-CAM LOCK ONE SIDE 2 600MM (23.62in) LENGTH OF 360 BLAZE SILVER EXTRUSION-WITH IB2 LOCK HOLES BOTH ENDS COMPONENTS IN THIS STEP: (Not to scale) 360 361 101 (PH1) CB10 6 A8 6 CB10 A5 IB2-O 77 IB2-O A4 IB2-O IB2-O 88 A2 IB2-O A9 5 IB2-O 5 YELLOW IB2-O FRAME A2 A5 9 CB10 9 CB10 A8 IB2-O 10 IB2-O 10 4 CB10 CB10 4 BLZ-PLT-550 A6 IB2-O IB2-O 33 A4 IB2-O IB2-O 22 A6 CB10 1 BLZ-PLT-550 A9 1 CB10 1 SETUP# LED-EV-THUMB-ORB LED-EV-WHT-6000-19 LED-EV-WHT-6000-10 LED-EV-CORD-8 # DESCRIPTION 40 THUMB KNOB, ORBUS VERSION, FOR LED LIGHT BAR 12 LIGHT BAR (SEG), AC POWER, 6000K, 21" L 8 LIGHT BAR (SEG), AC POWER, 6000K, 14" L 1 POWER CORD FOR AC LIGHTBAR - 8FT Connect LED lights End to End LED-EV-WHT-6000-10 LED-EV-WHT-6000-19 LED-EV-WHT-6000-10 6 LED-EV-WHT-6000-19 6 77 LED-EV-WHT-6000-19 LED-EV-WHT-6000-19 88 LED-EV-WHT-6000-10 LED-EV-WHT-6000-10 9 Connect LED lights End to End 9 LED-EV-WHT-6000-19 5 LED-EV-WHT-6000-19 5 Connect LED lights End to End LED-EV-WHT-6000-19 YELLOW FRAME LED-EV-WHT-6000-19 10 Connect LED lights End to End 10 LED-EV-WHT-6000-19 4 4 LED-EV-WHT-6000-19 LED-EV-WHT-6000-10 33 LED-EV-WHT-6000-10 LED-EV-WHT-6000-19 22 1 LED-EV-WHT-6000-10 LED-EV-WHT-6000-19 1 LED-EV-WHT-6000-10 FEED POWER CABLE THRU GROMMET HOLE 2 SETUP# A18 A12 A10 # DESCRIPTION 1155MM (45.47in) OF 830 SINGLE SIDED 4 UPRIGHT OPEN EXTRUSION -MFY-EPIN Tapered extension pin, 5/16-18 Thread 750MM (29.53IN) LENGTH OF 824 CORNER POST 4 EXTRUSION -WITH THRU HOLE FOR 3/8 BOLT, 38.1MM FROM END-WITH 824-EC CAP-WITH (2) MFY-LVL LEVELING FEET 4 1155MM (45.47in) OF 830 SINGLE SIDED UPRIGHT OPEN EXTRUSION MFY-BOLT-3/8-16-2.5 A10 A10 A18 A18 BUILD 4 UPRIGHTS COMPONENTS IN THIS STEP: (Not to scale) 830 824 A12 A12 A10 A10 A18 A18 A12 A12 3 SETUP# A11 831-833-EC # DESCRIPTION 4 883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS 4 7MM SEG PLASTIC END CAP FOR 831-833 EXTRUSION 831-833-EC LOOSEN END CAP TO ATTACH TOP CROSS BRACE ASSEMBLE 2 UNITS A11 831-833-EC 831-833-EC A11 831-833-EC CROSS BRACE SITS ON SUPPORT LEGS COMPONENTS IN THIS STEP: (Not to scale) 835 A11 A11 4 SETUP# A3 # DESCRIPTION 8 1000MM LENGTH OF PH2 EXTRUSION-WITH SIDE LOCKS BOTH SIDES A3 168mm [6.608"] A3 A3 A3 A3 COMPONENTS IN THIS STEP: (Not to scale) 102 (PH2) A3 A3 A3 A3 5 LED Lights Installing the LED light fixtures. STEP-1 Secure the LED lights with twist clips on both ends. STEP-2 Rotate the twist clips 90 degrees at both ends to secure to the extrusion. STEP-3 Connect the lead at both ends of the LED fixture as shown. Take note of male and female ends. 6 SETUP# A1 CB10 A13 IB2-O A14 A17 A15 A16 # DESCRIPTION 2 354MM LENGTH OF PH1 POWDERCOATED EXTRUSION-WITH CAM LOCKS BOTH ENDS 8 CB10 90 DEGREE CONNECTOR 400MM (15.75in) LENGTH OF 348 SILVER 4 EXTRUSION-WITH MITRE CUT BOTH ENDS 4 JOINER BAR (OLD STYLE) 1200MM (47.24in) LENGTH OF 348 SILVER 3 EXTRUSION-WITH MITRE CUT RIGHT END FOR CB10-IB2 LOCK HOLE LEFT END 1200MM (47.24in) LENGTH OF 348 SILVER 3 EXTRUSION-WITH MITRE CUT LEFT END FOR CB10-IB2 LOCK HOLE RIGHT END 1200MM (47.24in) LENGTH OF 348 SILVER 1 EXTRUSION-WITH IB2 HOLE ONE RIGHT END-WITH MITRE LEFT END-WITH GROMMET HOLE 100MM FROM LEFT END 1200MM (47.24in) LENGTH OF 348 SILVER EXTRUSION-WITH IB2 HOLE ONE LEFT 1 END-WITH MITRE RIGHT END-WITH GROMMET HOLE 1100MM FROM LEFT END RED FRAME CB10 4 4 5 5 A13 CB10 A17 A14 6 IB2-O 3 A1 3 6 A14 2 CB10 1 1 2 A13 IB2-O A15 CB10 COMPONENTS IN THIS STEP: (Not to scale) 348 101 (PH1) BLUE FRAME CB10 4 4 A10 A13 5 CB10 5 A14 IB2-O A18 3 A1 6 IB2-O 3 6 A17 21 CB10 2 CB10 A13 1 7 SETUP# # DESCRIPTION LED-EV-THUMB-ORB 16 THUMB KNOB, ORBUS VERSION, FOR LED LIGHT BAR LED-EV-WHT-6000-19 8 LIGHT BAR (SEG), AC POWER, 6000K, 21" L LED-EV-CORD-8 2 POWER CORD FOR AC LIGHTBAR - 8FT RED FRAME 4 5 4 5 BLUE 4 FRAME 5 4 5 LED-EV-WHT-6000-19 LED-EV-WHT-6000-19 LED-EV-WHT-6000-19 LED-EV-WHT-6000-19 RED FRAME Connect LED lights End to End 3 6 3 6 3 6 3 6 LED-EV-WHT-6000-19 LED-EV-WHT-6000-19 LED-EV-WHT-6000-19 LED-EV-WHT-6000-19 BLUE FRAME 2 1 2 1 FEED POWER CABLE THRU GROMMET HOLE 1 2 2 1 8 SETUP# B H E # DESCRIPTION LINER (B) (19.63 w X 98.37 h total size ) 15.63 w 1 X 94.37 h finish size, Opaque Liner, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner LINER (H) (19.63 w X 98.37 h total size ) 15.63 w X 94.37 h finish size, Opaque Liner, sewn with 1 FCE-2 silicone beading around perimeter & pull tab in bottom right corner LINER (E) (121.99 w X 98.37 h total size ) 117.99 w X 94.37 h finish size, Opaque Liner, sewn with 1 FCE-2 silicone beading around perimeter & pull tab in bottom right corner B E H 9 SETUP# # DESCRIPTION GRAPHIC (C) (39.26 w X 95.04 h total size ) 35.26 w X 91.04 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn C 1 with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) GRAPHIC (A) (19.63 w X 98.37 h total size ) 15.63 w X 94.37 h finish size, Dye-sub print on A 1 Backlit Textile, single sided, sewn with silicone A C beading around perimeter & pull tab in bottom right corner D GRAPHIC (F) (39.26 w X 95.04 h total size ) 35.26 w X 91.04 h finish size, Dye-sub print on Eclipse F 1 Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4" NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) GRAPHIC (G) (19.63 w X 98.37 h total size ) 15.63 w X 94.37 h finish size, Dye-sub print on G 1 Backlit Textile, single sided, sewn with silicone beading around perimeter & pull tab in bottom right corner GRAPHIC (D) (121.99 w X 98.37 h total size ) 117.99 w X 94.37 h finish size, Dye-sub print on D 1 Backlit Textile, single sided, sewn with silicone beading around perimeter & pull tab in bottom right corner F G 10 SETUP# # DESCRIPTION MFY-DB-36-17 2 36"W X 17"D DROP IN BASE WITH 2" TOE KICK MFY-SLF-36-12 4 36"W X 12"D SHELF RAISE AND HOOK SHELF INTO PLACE **START WITH BOTTOM SHELVES. MFY-DB-36-17 PLACE BASE PAN IN GROOVE(FOOT) MFY-DB-36-17 MFY-SLF-36-12 MFY-SLF-36-12 MFY-SLF-36-12 MFY-SLF-36-12 MFY-DB-36-17 11
The Exhibitors' Handbook