Mitsubishi M-Series MSZ-GL15NA & MUZ-GL15NA Heat Pump System
15,000 BTU/H Wall-Mounted Heat Pump System
Unit Information
Indoor Unit: MSZ-GL15NA
Outdoor Unit: MUZ-GL15NA-U1 / MUZ-GL15NA-U2
Wireless Remote Controller
General Features
- Slim wall-mounted indoor units provide zone comfort control.
- The outdoor unit powers the indoor unit, and should a power outage occur, the system automatically restarts when power returns.
- INVERTER-driven compressor and LEV provide high efficiency and comfort while using only the energy needed to maintain maximum performance.
- Multiple fan speed options: Quiet, Low, Medium, High, Super-high, Auto.
- Multiple control options available: Hand-held Remote Controller (provided with unit), kumo cloud® smart device app for remote access, Third-party interface options, Wired or wireless controllers.
- Quiet operation.
- Smart Set: recalls a preferred preset temperature setting at the touch of a button.
- Blue Fin anti-corrosion treatment applied to the outdoor unit heat exchanger for increased coil protection and longer life.
Specifications: MSZ-GL15NA & MUZ-GL15NA
Cooling
| Parameter | Unit | Value |
|---|---|---|
| Maximum Capacity | BTU/H | 18,200 |
| Rated Capacity | BTU/H | 14,000 |
| Minimum Capacity | BTU/H | 3,100 |
| Maximum Power Input | W | 2,000 |
| Rated Power Input | W | 1,080 |
| Moisture Removal | Pints/h | 2.7 |
| Sensible Heat Factor | 0.78 | |
| Power Factor | % | 97 / 97 |
Heating at 47°F
| Parameter | Unit | Value |
|---|---|---|
| Maximum Capacity | BTU/H | 20,900 |
| Rated Capacity | BTU/H | 18,000 |
| Minimum Capacity | BTU/H | 4,800 |
| Maximum Power Input | W | 2,010 |
| Rated Power Input | W | 1,600 |
| Power Factor | % | 98 / 98 |
Heating at 17°F
| Parameter | Unit | Value |
|---|---|---|
| Maximum Capacity | BTU/H | 16,400 |
| Rated Capacity | BTU/H | 12,200 |
| Maximum Power Input | W | 1,850 |
| Rated Power Input | W | 1,190 |
Heating at 5°F
| Parameter | Unit | Value |
|---|---|---|
| Maximum Capacity | BTU/H | 13,680 |
| Maximum Power Input | W | 1,570 |
Heating at -4°F
| Parameter | Unit | Value |
|---|---|---|
| Maximum Capacity | BTU/H | 11,160 |
Heating at -13°F
| Parameter | Unit | Value |
|---|---|---|
| Maximum Capacity | BTU/H |
Efficiency
| Parameter | Unit | Value |
|---|---|---|
| SEER | 21.6 | |
| EER¹ | 13.0 | |
| HSPF (IV) | 11.7 | |
| COP at 47°F² | 3.30 | |
| COP at 17°F in Maximum Capacity³ | 2.60 | |
| COP at 5°F in Maximum Capacity⁴ | 2.55 | |
| ENERGY STAR® certified units | YES |
Electrical
| Parameter | Unit | Value |
|---|---|---|
| Voltage, Phase, Frequency | 208/230V, 1 phase, 60Hz | |
| Guaranteed Voltage Range | V AC | 187 - 253 |
| Voltage: Indoor - Outdoor, S1-S2 | V AC | 208/230 |
| Voltage: Indoor - Outdoor, S2-S3 | V DC | 24 |
| Short-circuit Current Rating (SCCR) | KA | 5 |
| Recommended Fuse/Breaker Size (Outdoor) | A | 15 |
| Recommended Wire Size (Indoor - Outdoor) | AWG | 14 |
| MCA | A | 1 |
| MOCP | A | 15 |
Indoor Unit
| Parameter | Unit | Value |
|---|---|---|
| Blower Motor Full Load Amperage | A | 0.76 |
| Blower Motor Output | W | 30 |
Specifications: MSZ-GL15NA & MUZ-GL15NA
Indoor Unit
| Parameter | Unit | Value |
|---|---|---|
| Airflow Rate at Cooling, Dry | CFM | 533-420-335-272-205 |
| Airflow Rate at Cooling, Wet | CFM | 498-385-300-237-170 |
| Airflow Rate at Heating, Dry | CFM | 463-367-304-247-205 |
| Sound Pressure Level (Cooling) | dB(A) | 49-44-38-32-26 |
| Sound Pressure Level (Heating) | dB(A) | 46-40-35-30-26 |
| Drain Pipe Size | In. (mm) | 5/8 (15.88) |
| Heat Exchanger Type | Plate fin coil | |
| External Finish Color | Munsell 1.0Y 9.2/0.2 | |
| Unit Dimensions (W x D x H) | In. (mm) | 31-7/16 (798) x 9-1/8 (232) x 11-5/8 (295) |
| Package Dimensions (W x D x H) | In. (mm) | 33-1/2 (850) x 12 (300) x 14 (350) |
| Unit Weight | Lbs. (kg) | 22 (10) |
| Package Weight | Lbs. (kg) | 26 (11.5) |
Indoor Unit Operating Temperature Range
| Parameter | Unit | Value |
|---|---|---|
| Cooling Intake Air Temp (Maximum / Minimum) | °F | 90 DB, 73 WB / 67 DB, 57 WB |
| Heating Intake Air Temp (Maximum / Minimum) | °F | 80 DB / 70 DB |
| MCA | A | 10 |
| MOCP | A | 15 |
| Fan Motor Full Load Amperage | A | 0.5 |
| Fan Motor Output | W | 55 |
| Airflow Rate | CFM | 1,243 / 1,229 |
| Refrigerant Control | LEV | |
| Defrost Method | Reverse cycle |
Outdoor Unit
| Parameter | Unit | Value |
|---|---|---|
| Heat Exchanger Type | Plate fin coil | |
| Sound Pressure Level, Cooling¹ | dB(A) | 49 |
| Sound Pressure Level, Heating² | dB(A) | 51 |
| Compressor Type | DC INVERTER-driven | |
| Compressor Model | SNB130FQBMT | |
| Compressor Rated Load Amps | A | 7.4 |
| Compressor Locked Rotor Amps | A | 9.3 |
| Compressor Oil Type // Charge | oz. | FV50S // 11.8 |
| External Finish Color | Munsell 3Y 7.8/1 | |
| Base Pan Heater | Optional | |
| Unit Dimensions (W x D x H) | In. (mm) | 31-1/4 (800) x 11-1/6 (285) x 21-5/10 (550) |
| Package Dimensions (W x D x H) | In. (mm) | 37 (940) x 14-15/16 (380) x 24-13/16 (630) |
Specifications: MSZ-GL15NA & MUZ-GL15NA
Outdoor Unit
| Parameter | Unit | Value |
|---|---|---|
| Unit Weight | Lbs. (kg) | 81 (37) |
| Package Weight | Lbs. (kg) | 90 (40) |
| Cooling Air Temp (Maximum / Minimum) | °F | 115 / 14 |
| Cooling Thermal Lock-out / Re-start Temperatures** | °F | -1 / 3 |
| Heating Air Temp (Maximum / Minimum) | °F | 75 / -4 |
| Heating Thermal Lock-out / Re-start Temperatures** | °F | -9 / -4 |
Refrigerant
| Parameter | Unit | Value |
|---|---|---|
| Type | R410A | |
| Charge | Lbs, oz | 2, 9 |
Piping
| Parameter | Unit | Value |
|---|---|---|
| Gas Pipe Size O.D. (Flared) | In. (mm) | 1/2 (12.7) |
| Liquid Pipe Size O.D. (Flared) | In. (mm) | 1/4 (6.35) |
| Maximum Piping Length | Ft. (m) | 65 (20) |
| Maximum Height Difference | Ft. (m) | 40 (12) |
| Maximum Number of Bends | 10 |
Notes
AHRI Rated Conditions
| Condition | Cooling (Indoor // Outdoor) | °F | 80 DB, 67 WB // 95 DB, 75 WB |
|---|---|---|---|
| Heating at 47°F (Indoor // Outdoor) | °F | 70 DB, 60 WB // 47 DB, 43 WB | |
| Heating at 17°F (Indoor // Outdoor) | °F | 70 DB, 60 WB // 17 DB, 15 WB | |
| Heating at 5°F (Indoor // Outdoor) | °F | 70 DB, 60 WB // 5 DB, 4 WB | |
| Heating at -4°F (Indoor // Outdoor) | °F | 70 DB, 60 WB // -4 DB, -5 WB |
*Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.
**System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.
Accessories: MSZ-GL15NA
- Anti-allergy Enzyme Filter: MAC-408FT-E
- kumo touch ™™ RedLINK TM Wireless Controller: MHK2
- Deluxe MA Remote Controller¹: PAR-40MAAU
- Simple MA Controller¹: PAC-YT53CRAU-J
- Touch MA Controller¹: PAR-CT01MAU-SB
- Wired Remote Sensor: M21-EAA-307
- Wireless Temperature and Humidity Sensor: PAC-USWHS003-TH-1
- System Control Interface²: MAC-334IF-E
- Wireless Interface 2: PAC-USWHS002-WF-2
- Thermostat Interface: PAC-US444CN-1
- kumo station®: PAC-WHS01HC-E
- USNAP Interface: PAC-WHS01UP-E
- IT Extender: PAC-WHS01IE-E
- BACnet® and MODBUS® Interface: PAC-UKPRC001-CN-1
- Lockdown Bracket for Hand-held Remote Controllers: RCMKP1CB
- Blue Diamond Sensor Extension Cable - 15 Ft.: C13-103
- Blue Diamond Alarm Extension Cable - 6.5 Ft.: C13-192
- Blue Diamond MultiTank - collection tank for use with multiple pumps: C21-014
- Blue Diamond Rubber Foot Pads: F10-010
- Mini Condensate Pump - 230 volt application: S130-230
- MegaBlue Advanced Blue Diamond Condensate Pump w/ Reservoir & Sensor: X87-835 - 110 to 250V
- MaxiBlue Advanced Blue Diamond Mini Condensate Pump w/ Reservoir & Sensor (110V) up to 48,000 BTU/H[recommended]: X87-711 - 110V
- Advanced Blue Diamond Mini Condensate Pump w/ Reservoir & Sensor (208/230V) [recommended]: X87-721 - 208/230V
- MicroBlue Blue Diamond Mini Condensate Pump (110/208/230V) up to 18,000 BTU/H: X85-003
- Fascia Kit for MicroBlue Pump - mounts the MicroBlue and sensor directly beneath the indoor unit: T18-016
- Drain Pan Level Sensor: SS610E
- (30A/600V/UL) [fits 2" X 4" utility box] - Black: TAZ-MS303
- (30A/600V/UL) [fits 2" X 4" utility box] - White: TAZ-MS303W
¹ Requires MAC-334IF-E
² Allows indoor units to connect to an MA Controller
Accessories: MUZ-GL15NA
- Air Outlet Guide: MAC-881SG
- Drain Socket: MAC-860DS
- Optional Defrost Heater: MAC-640BH-U
- Hail Guard: HG-B4
- Outdoor Unit 3-1/4 inch Mounting Base (Pair) - Plastic: DSD-400P
- Condensing Unit Mounting Pad 16" x 36" x 3": ULTRILITE 1
- Outdoor Unit Stand - 12" High: QSMS1201M
- Outdoor Unit Stand - 18" High: QSMS1801M
- Outdoor Unit Stand - 24" High: QSMS2401M
- Heavy Duty Wall Mounting Bracket-Coated Steel: QSWB2000M-1
- Heavy Duty Wall Mounting Bracket - 316 Series Stainless Steel: QSWBSS
- 15' x 1/4" x 15' / 1/2" Lineset (Twin-Tube Insulation): MLS141212T-15
- 30' x 1/4" x 30' / 1/2" Lineset (Twin-Tube Insulation): MLS141212T-30
- 50' x 1/4" x 50' / 1/2" Lineset (Twin-Tube Insulation): MLS141212T-50
- 65' x 1/4" x 65' / 1/2" Lineset (Twin-Tube Insulation): MLS141212T-65
- 100' x 1/4" x 100' / 1/2" Lineset (Twin-Tube Insulation): MLS141212T-100
Dimensions: MSZ-GL15NA
Unit: Inch
Indoor Unit Dimensions:
- Width: 31-7/16
- Depth: 9-1/8
- Height: 11-5/8
Package Dimensions:
- Width: 33-1/2
- Depth: 12
- Height: 14
Piping Connections:
- Liquid line O.D.: 1/4
- Gas line O.D.: 3/8 (09/12 KBTU/H), 1/2 (15 KBTU/H)
- Insulation O.D.: 1-1/8
Drain Hose:
- O.D.: 1-1/8
Dimensions: MUZ-GL15NA
Unit: Inch
Required Space
- Clearance: 4 inches or more when front and sides are clear. 8 inches or more when 2 sides (left, right, and rear) are clear. 14 inches or more when front and sides are clear.
Outdoor Unit Dimensions:
- Width: 31-1/2
- Depth: 11-1/32
- Height: 21-5/8
Package Dimensions:
- Width: 37
- Depth: 14-15/16
- Height: 24-13/16
Piping Connections:
- Liquid refrigerant pipe joint (flared): Ø 1/4
- Gas refrigerant pipe joint (flared): Ø 3/8 (09/12 KBTU/H), Ø 1/2 (15 KBTU/H)
Drain Hole: Ø 1-21/32 (09/12/15 Btu/h)
Bolt Pitch for Installation: 12~12-3/4
