SLIDING DOORS ASSEMBLY INSTRUCTIONS
IMPORTANT
Please read carefully.
Protect your eyes when handling metal parts; wear safety goggles.
Follow all steps in order and complete each step before starting the next step.
? Contact: Dooraftersale@gmail.com
What's Included
| Part | Description | Quantity |
|---|---|---|
| Fascia | Long, rectangular panel | (x1) |
| Top Track | Long rail with a channel | (x1) |
| Top Track Screws | Small screws | (x12) |
| Top Connectors #1 | Metal bracket for top of door | (x2) |
| Top Connectors #2 | Metal bracket for top of door | (x2) |
| Top Connector Screws | Screws for connectors | (x8) |
| Door Bumper | Curved protective piece | (x8) |
| Door Bumper Screws | Screws for bumpers | (x2) |
| Floor Guide | Plastic piece to guide door bottom | (x1) |
| Handles | Recessed door handles | (x2) |
| Handle Screws | Screws for handles | (x8) |
Note for Floor Guide: Place the plastic plug at the indicated position.
Handle Installation (Optional)
Step 1
Image shows two door slabs ready for handle installation.
Text: Install the handles before hanging the door.
Step 2
Image depicts drilling a groove on the door edge. Dimensions shown are 7/16 inch deep.
Text: Groove 7/16" deep hole at desired height.
Step 3
Image shows attaching the handle to the door and fastening with screws.
Text: Fasten the handles with screws.
Step 4
Image shows the completed handle installation on the door.
Text: The installation was successful. ✔️
Door Installation Steps
Step 1
Image shows two door slabs side-by-side.
Text: Two slabs are identical.
Step 1.1
Image shows attaching Top Connector #1 to the front and back of the door top edge.
Text: Back, Front.
Step 1.2
Image shows attaching Top Connector #2 to the front and back of the door top edge.
Text: Back, Front.
Step 2
Image shows the door being hung, likely onto the top track with connectors.
Step 3
Image shows installing the Floor Guide at the bottom of the door frame, with a measurement of ½ inch.
Step 4
Image shows the door positioned, indicating 'Outside' and 'Inside' relative to the door's orientation.
Step 5
Image shows the door positioned, indicating 'Outside' and 'Inside' relative to the door's orientation.
Step 6
Image shows a mechanism at the top of the door, with a circular arrow indicating rotation.
Text: Rotate to adjust door up or down. ↪️
Step 7
Image shows the bottom of the door and the Floor Guide, with an arrow pointing to a specific position for a plastic plug.
Text: Place the plastic plug at this position.
Step 8
Image shows the Fascia being attached to the top track.
Text: Adhere the Fascia to the track.
