Siemens SINAMICS S120 Drive System - Booksize Format Motor Modules
This document provides detailed technical specifications and ordering information for the Siemens SINAMICS S120 drive system, specifically focusing on the booksize format single motor modules.
Design Features
The Single Motor Modules in booksize format offer a range of connections and interfaces:
- 2 DC link connections via integrated DC link busbars
- 1 electronics power supply connection via integrated 24 V DC busbars
- 3 DRIVE-CLIQ sockets
- 1 motor connection, plug-in or screw-stud depending on rated output current
- 1 safe standstill input (Enable Pulses)
- 1 safe motor brake control
- 1 temperature sensor input (KTY84-130 or PTC)
- 2 PE/protective conductor connections
The status of the Motor Modules is indicated by two multi-color LEDs.
The motor cable shield is integrated within the connector on 50 mm and 100 mm wide Motor Modules. For 150 mm, 200 mm, and 300 mm wide Motor Modules, a shield connection plate can be supplied, allowing the motor cable shield to be connected using a hose clip.
The signal cable shield can be connected to the Motor Module using a shield terminal, such as a Weidmüller type KLBÜ 3-8 SC.
Scope of Supply
The scope of supply for the Motor Modules includes:
- DRIVE-CLIQ cable appropriate to the width of the Motor Module for connection to the adjacent Motor Module (length = width of Motor Module + 0.06 m)
- Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
- Connector X21
- Connector X11 for the motor brake connection (for Motor Modules with a rated output current of 45 A to 200 A)
- 2 blanking plugs for sealing unused DRIVE-CLIQ sockets
- Fan insert for the 132 A and 200 A Motor Modules (fan voltage supplied by the Motor Module)
- 1 set of warning labels in 30 languages
- 1 heat conducting foil (for Motor Modules with cold plate cooling only)
Integration
The Single Motor Module receives its control information via DRIVE-CLIQ from:
- SINUMERIK 828D BASIC
- SINUMERIK 828D
- Numeric Control Extensions NX10.3
Technical Specifications
The following tables detail the technical specifications for the SINAMICS S120 booksize format motor modules.
General Specifications
| Product Name | Internal Air Cooling | External Air Cooling | Cold Plate Cooling | Liquid Cooling |
|---|---|---|---|---|
| Article No. | Article No. | Article No. | Article No. | |
| DC link voltage | 510 ... 720 V DC |
Output Current
| Parameter | 3 A | 5 A | 9 A | 18 A | 30 A | 45 A | 60 A | 85 A | 132 A | 200 A |
|---|---|---|---|---|---|---|---|---|---|---|
| Rated current /rated | 45 A | 60 A | 85 A | 132 A (105 A) | 200 A (140 A) | |||||
| Base-load current /H | 38 A | 52 A | 68 A | 105 A (84 A) | 141 A (99 A) | |||||
| For S6 duty /S6 (40%) max | 60 A | 80 A | 110 A | 150 A (120 A) | 230 A (161 A) |
Power Specifications
| Parameter | 3 A | 5 A | 9 A | 18 A | 30 A | 45 A | 60 A | 85 A | 132 A | 200 A |
|---|---|---|---|---|---|---|---|---|---|---|
| Rated power at 600 V DC link voltage | ||||||||||
| Rated power | 24 kW | 32 kW | 46 kW | 71 kW (57 kW) | 107 kW (75 kW) | |||||
| Based on /H | 21 kW | 28 kW | 37 kW | 57 kW | 76 kW | |||||
| DC link current | 54 A | 72 A | 102 A | 158 A | 200 A |
Current Carrying Capacity
| Parameter | Value |
|---|---|
| DC link busbars | 200 A |
| 24 V DC busbars | 20 A |
DC Link Capacitance
| Parameter | Value |
|---|---|
| DC link capacitance | 1175 µF |
| Current requirement at 24 V DC, max. | 1.2 A |
Power Loss (Internal/External Air Cooling)
| Parameter | 3 A | 5 A | 9 A | 18 A | 30 A | 45 A | 60 A | 85 A | 132 A | 200 A |
|---|---|---|---|---|---|---|---|---|---|---|
| Maximum power loss with internal air cooling in control cabinet | 0.46 kW | 0.62 kW | 0.79 kW | 1.29 kW | 2.09 kW | |||||
| Typical losses with internal air cooling in control cabinet | 0.38 kW | 0.55 kW | 0.77 kW | 1.26 kW | 2.03 kW | |||||
| With external air cooling, int./ext. | 0.14/0.32 kW | 0.16/0.46 kW | 0.2/0.59 kW | 0.29/1.0 kW | 0.47/1.62 kW | |||||
| Cooling air requirement m³/s | 0.031 | 0.031 | 0.044 | 0.144 | 0.144 | |||||
| Sound pressure level LpA (1 m) | < 65 dB | < 65 dB | < 60 dB | < 73 dB | < 73 dB |
Power Loss (Cold Plate Cooling)
| Parameter | 3 A | 5 A | 9 A | 18 A | 30 A | 45 A | 60 A | 85 A | 132 A | 200 A |
|---|---|---|---|---|---|---|---|---|---|---|
| Power loss, int./ext. | 0.11/0.34 kW | 0.13/0.48 kW | 0.15/0.62 kW | 0.24/1.05 kW | 0.39/1.7 kW | |||||
| Thermal resistance Rth | 0.055 K/W | 0.055 K/W | 0.05 K/W | 0.028 K/W | 0.028 K/W |
Dimensions and Weight
| Parameter | 3 A | 5 A | 9 A | 18 A | 30 A | 45 A | 60 A | 85 A | 132 A | 200 A |
|---|---|---|---|---|---|---|---|---|---|---|
| Weight, approx. (Internal air cooling) | 9 kg | 9 kg | 15 kg | 21 kg | 21 kg | |||||
| Weight, approx. (External air cooling) | 13.2 kg | 13.4 kg | 17.2 kg | 27.2 kg | 30 kg | |||||
| Weight, approx. (Cold plate cooling) | 9.1 kg | 9.1 kg | 12.5 kg | 18 kg | 18 kg | |||||
| Weight, approx. (Liquid cooling) | 21 kg |
Accessories
Various accessories are available for the SINAMICS S120 booksize format motor modules:
| Description | Article No. | Description (continued) | Article No. |
|---|---|---|---|
| Power connector (X1) | 6SL3162-2MA00-0AA0 | Reinforced DC link busbar set | |
| Shield connection plate | 6SL3162-1AF00-0AA1 | Warning labels in 30 languages | 6SL3166-3AB00-0AA0 |
| Accessories pack (plug-in terminals, DRIVE-CLIQ jumper, dust-proof blanking plugs) | 6SL3162-2DB00-0AA0 | Accessories for re-ordering | |
| DC link rectifier adapter | 6SL3162-2BD00-0AA0 | Accessories pack (plug-in terminals, DRIVE-CLIQ jumper, dust-proof blanking plugs) | 6SL3066-4CA00-0AA0 |
