USB Wired Controller for PS4
Model SP4027
Controller Layout
The controller features the following labeled components:
- 1: Directional pad
- 2: Left Analog stick
- 3: Action buttons
- 4: Right analog stick
- 5: Home button
- 6: L1/L2 button
- 7: Share button
- 8: Options buttons
- 9: R1/R2 buttons
- 10: Touch sensitive pad
- 11: 3.5 mm jack
Product Specifications
- Software Support: Compatible with all PS4 versions.
- Compatibility: PS4
- Sensor: No
- Vibration: Double Vibration
- Touchpad: Clickable, non-tactile functionality
- Speaker: No
- Microphone/Headset: 3.5mm jack
- Connection Method: USB Cable
- Cable Length: 3 Meters
Firmware Update
If the controller disconnects regularly, a firmware update is necessary. To perform the update:
- Visit the official website: www.freaksandgeeks.fr
- Download the firmware from a PC.
- Install the firmware following the instructions provided on the website.
Safety and Warnings
Please read and comply with the following health and safety information. Failure to observe these precautions may result in personal injury or property damage. Use by children should be under adult supervision.
- Do not expose the product to microwaves, high temperatures, or direct sunlight.
- Avoid contact with liquids. Do not handle the product with wet or greasy hands. If liquid enters the product, discontinue use immediately.
- Do not subject the product to excessive force. Do not touch the product while it is charging during a thunderstorm.
- If you hear a suspicious noise, see smoke, or smell a strange odor, stop using the product immediately.
- Do not attempt to disassemble or repair the product yourself.
- Do not touch damaged parts. Avoid contact with any liquid leaking from the product.
- Keep packaging materials out of the reach of small children, as they could be ingested.
- If the product is dirty, clean it with a soft, dry cloth. Avoid using alcohol, thinner, or other solvents.
- Never hold the product by its cable.
- Individuals with injuries or problems affecting fingers, hands, or arms should not use the vibration function.
- Store the product at a moderate temperature between 10 and 25 degrees Celsius (50-77 degrees Fahrenheit).






