Professional USB Microphone and Wireless Microphone – TONOREU Declaration of Conformity – TONOR
Instruction Manual for TONOR models including: TW520, TW790, TW520 UHF Wireless Microphone, TW520, UHF Wireless Microphone, Wireless Microphone, Microphone
Fujian EastWest Lifewit Technology Co.,LTD TW520 2AZNY-TW520 2AZNYTW520 tw520
File Info : application/pdf, 12 Pages, 488.79KB
DocumentDocumentUHF Wireless Microphone Instruction Manual TW520 ABOUT THIS MANUAL Thank you for purchasing TONOR wireless microphone. This manual is intended to help you understand all about this microphone and how to use it. TONOR always strives for the ultimate user experience. All our knowledge and passion for audio technology are incorporated into building microphones with high performance for you. The TONOR microphone is high quality and easy to use to achieve the best user experience. Enjoy your microphone! TONOR Team Package Including x2 English OPERATING ENVIRONMENTS & NOTES - When using this device, keep it away from water. - Use the device in ventilated environment, keep it away from fire. - Since it's a wireless device, please keep it away from other interfering sources. - Don't take apart the device. - Please use the standard power supply, high voltage may damage the device. - When the battery is low, the mic or receiver will automatically shut down. Please charge it. - Recommended to use the original charging cable for all charging equipment. Or use a Type-A to Type-C charging cable. - Not recommended to use equipment while charging. SPECIFICATIONS 1. Frequency range: 539.5-578.5MHz 2. Channels: 20ch/each channel 3. RF power: 10dBm 4. Frequency response: 40Hz-18kHz 5. T.H.D: 0.5% 6. Mic Battery: Lithium battery 14650 3.7V/1100mAh 7. Mic Charging Time: 3-4 hours 8. Mic Battery Life: 10 hours 9. Receiver powered: DC 13.5V, 1000mA 10. Working distance: Up to 80m MICROPHONE OPERATION INSTRUCTION 1 CH:000 3 538.10MHz 4 2 5 6 7 8 1. Volume + - When adjusting the volume, the screen will display from U00 to U16. 2. Volume - When adjusting the volume, the screen will display from U00 to U16. - Note that when the volume is adjusted to U00, it will return to U12 for hearing protection next time it is turned on. 3. Frequency Number - CHA from CH001 to CH02 0 . CHB from CH101 to CH12 0 . 4. Current Frequency 5. Microphone real-time battery level 6. IR Infrared Pairing Window 7. Power Switch with LED Indicator - Press and hold for two seconds to turn on and off the microphone. - The power indicator light is always green when the mic is turned on. 8. Wireless Charging Point STEPS TO PAIR 1. Turn on the microphone and receiver. 2. Recommended Automatic setting: Press and hold the set button for 2 seconds for CHA to automatically search for the best frequency. When the receiver selects the frequency, align the microphone IR window with the receiver IR window within 20cm. Click the set button, and wait for 3 seconds. When the frequencies of the microphone and receiver are consistent, pairing is successful. If unsuccessful, click the set button again and wait 3 seconds to pair again. 3. Optional Manual setting: Click receiver up button 5 or down button 7 to choose the free frequency needed for CHA. Align the CHA IR window with the receiver IR window for CHA within 20cm. Click set button for CHA to pair. When the frequencies of the microphone and receiver are consistent, pairing is successful. If unsuccessful, click the set button again and wait 3 seconds to pair again. 4. Repeat 2 or 3 step for others to finish pairing for CHB. 5. The pairing steps of CHB are the same as CHA. When operating CHB, just follow the buttons on CHB. 6. Multiple sets used together: - Make sure all devices are turned off. Then turn on the first set of receivers and pair CHA and CHB according to step 2. Keep the paired microphone and receiver turned on. - Later turn on the second set of receivers and repeat step 2, and so on. Please keep paired devices turned on until all devices are paired. It is recommended that up to 6-7 sets be used at the same time. TROUBLESHOOTING Turn on all the microphones, but one of them has on sound. Reconnect the microphone and receiver according to the STEPS TO PAIR. Received signal with noise or interference Change to other frequencies. Check whether the receiving distance exceeds the maximum range. Microphone cannot be tumed on. Check whether microphone is full charged. EU Declaration of conformity · RoHS Directive (2011/65/EU) Hereby, Fujian EastWest Lifewit Technology Co.,LTD declares that the radio equipment type TW5 2 0 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.tonormic.com/pages/eu-declaration-of-conformity Conditions and restrictions for using frequencies Conditions and restrictions for using frequencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: https://www.tonormic.com/pages/permitted-frequency-bands WARRANTY TONOR provides 2 years of after-sales service, free replacement to products that are NOT damaged resulting from accident, alteration, misuse, negligence, or abuse. If exceeding 30 days of Amazon return policy, you can still contact us through our Shopify TONORMIC. We will serve you with full sincerity! FCC Statement US MX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. ISED Statement CA This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. FR L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ISED Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used installed and operated with minimum distance 0mm between the radiator and your body. L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF.Cet équipement doit être installé et utilisé avec une distance minimale de 0 mm entre le radiateur et votre corps. This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canada's Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Wireless Microphones in the TV Bands. Operating Frequency CH001 CH002 CH003 CH004 CH005 539.5 540.5 541.5 542.5 543.5 CH006 CH007 CH008 CH009 CH010 CHA/20CH 544.5 CH011 545.5 CH012 546.5 CH013 547.5 CH014 548.5 CH015 549.5 550.5 551.5 552.5 553.5 CH016 CH017 CH018 CH019 CH020 554.5 555.5 556.5 557.5 558.5 CH101 CH102 CH103 CH104 CH105 559.5 560.5 561.5 562.5 563.5 CH106 CH107 CH108 CH109 CH110 CHB/20CH 564.5 CH111 565.5 CH112 566.5 CH113 567.5 CH114 568.5 CH115 569.5 570.5 571.5 572.5 573.5 CH116 CH117 CH118 CH119 CH120 574.5 575.5 576.5 577.5 578.5 https://www.tonormic.com support@tonormic.com FUJIAN EASTWEST LIFEWIT TECHNOLOGY CO.,LTD | RM 1201-1205, BLD 18, 2ND PHASE OF INNOVATION PARK, FUZHOU 350108, CHINA EASTWEST ELECTRONIC COMMERCE CO US LIMITED | 3500 SOUTH DUPONT HIGHWAY, SUITE G106 DOVER, DE 19901 UNITED STATES LIFEWIT LIMITED | UNIT 2, VINCENT HOUSE, FIRCROFT WAY, EDENBRIDGE UNITED KINGDOM Lifewit GmbH | Friedenstraße 5 97072 Wuerzburg Germany MADE IN CHINA