Bosch Dishwasher Installation Instructions

This document provides comprehensive installation instructions for Bosch dishwashers. Please follow these steps carefully to ensure proper setup and operation. The estimated installation time is 2-3 hours.

Required Tools and Parts

Ensure you have the following tools and parts before beginning the installation:

Screws: Ø4x28, Ø4x30, Ø4x15
Wall plugs
Mounting brackets
Power cord
Tools: Screwdrivers (Torx T15, Torx T20), hammer, measuring tape, jigsaw, drill with 2mm drill bit, wrenches (SW10, SW13), wire cutters.

Preparation and Measurements

Before installation, verify the dimensions and connections required:

Water connection: Ø 38 mm, max. 1.1 m hose length, min. 280 mm distance from wall.
Water inlet connection: 20.9 mm (G 3/4"), 0.05 - 1 MPa (0.5 - 10 bar) pressure, max. 60°C water temperature.
Electrical connection: Ensure a properly grounded power outlet is available.
Cabinet dimensions: The appliance requires a space of 550 mm width, 865-925 mm height, and 600 mm depth.

Installation Steps

Follow these steps for installing the dishwasher:

Step 1: Unpacking and Initial Setup

Carefully unpack the dishwasher and all accessories. Check for any damage. Lay out all parts as shown in the diagrams.

Step 2: Mounting Brackets

Attach the mounting brackets to the appliance using the provided screws (9x Torx T15). Ensure they are securely fastened.

Step 3: Positioning the Dishwasher

Slide the dishwasher into the designated cabinet space. Ensure it is level and stable. The required clearance for the cabinet is 600-608mm or 608-620mm depending on the model. Use a measuring tape to confirm dimensions.

Step 4: Securing the Dishwasher

Secure the dishwasher to the cabinet using the provided screws and brackets. Ensure the appliance is flush with the cabinet front. Use wrenches SW10 and SW13 as needed. Check that the appliance is level and does not move.

Step 5: Connecting Water and Power

Connect the water inlet hose to the water supply and the drain hose to the drain pipe. Ensure all connections are watertight. Connect the power cord to the appliance and plug it into the grounded outlet. The power cord length is 5 meters (ET-Nr. 12022522).

Step 6: Water Connections and Leak Check

Connect the water inlet hose (Ø 38 mm) to the water supply. Ensure a minimum diameter of 18 mm for the drain hose connection. Perform a leak check after all water connections are made. Ensure the water flow rate is at least 10 liters per minute. Do not exceed 10 Nm torque when tightening connections.

Step 7: Final Checks

Perform a final check of all connections and ensure the dishwasher is securely installed. Test the appliance by running a short cycle.

Important Notes

Do not pinch cables or hoses during installation.
Ensure all screws are tightened correctly.
Refer to the specific model number for any variations in installation procedures.
Maximum load capacity for shelves is 4.5-11 Kg.

Troubleshooting

If you encounter any issues during installation, refer to the troubleshooting section of the full manual or contact Bosch customer support.

Additional Information

Part numbers for accessories include ET-Nr. 00350564 (max. 4m, 2m, Ø 22mm), ET-Nr. 10011641, ET-Nr. 11029812, ET-Nr. 00657927, and ET-Nr. 12022522 (5m power cord).

	Bosch 24" Pocket Handle Dishwasher 500 Series SHP65CC5UC - Features, Specifications, and Installation Detailed information on the Bosch 24-inch Pocket Handle Dishwasher, 500 Series, Stainless Steel (SHP65CC5UC). Includes features like 44 dBA operation, Precision Wash®, Home Connect®, AquaStop®, third rack, and technical specifications for installation and performance.
	Bosch SHVM78Z53N 24" Custom Panel Dishwasher: Features, Specs & Installation Explore the Bosch 800 Series 24" Custom Panel Dishwasher (SHVM78Z53N). Discover its CrystalDry™ technology, quiet 42 dBA operation, Flexible 3rd Rack, AquaStop®, and detailed specifications and installation guidelines.
	Bosch 300 Series 24" Bar Handle Dishwasher SHX53CM5N - Stainless Steel Explore the Bosch 300 Series 24-inch Bar Handle Dishwasher (SHX53CM5N) in Stainless Steel. Features include PrecisionWash®, Home Connect®, AquaStop®, and a 3rd rack. View specifications and installation details.
	Bosch SPS4HMW49E Dishwasher Quick Reference Guide A concise guide to setting up and operating your Bosch SPS4HMW49E dishwasher, including Home Connect setup, water hardness settings, detergent and rinse aid usage, program details, cleaning instructions, and troubleshooting tips.
	Bosch Dishwasher Quick Reference Guide: Setup, Programs, and Troubleshooting A quick reference guide for Bosch dishwashers, covering Home Connect setup, water hardness settings, special salt and rinse aid usage, program details, basic operation, cleaning, and troubleshooting common faults.
	Bosch Dishwasher Installation Guide - SMI8ZCS00X/48 Step-by-step installation instructions for the Bosch SMI8ZCS00X/48 dishwasher, covering mounting, connections, and initial checks.
	Bosch Dishwasher Installation Guide - SMH6TCX01E/38 Comprehensive installation instructions for the Bosch SMH6TCX01E/38 fully integrated dishwasher, covering all necessary steps and components.
	Bosch 300 Series 24-Inch Built-In Dishwasher Installation Dimensions Provides essential installation dimensions and connection details for the Bosch 300 Series 24-inch built-in dishwasher, ensuring correct placement and setup.