Montech Sky One Lite ATX Case
Installation Guide
Product Specifications
| Product Name | SKY ONE LITE |
| Available Color | Black/White |
| Dimensions (L*W*H) | 416*220*490mm |
| Motherboard Support | ATX/Micro-ATX/Mini-ITX |
| Expansion Slots | 7 |
| Hard Disk Support | 2.5"SSD *4 / 3.5"HDD*2 or 2.5 SSD*2 |
| I/O Port | USB3.0*2 / USB 3.1*1 / Mic*1 / Audio*1 / LED & Reset Button |
| GPU Clearance | 350mm |
| CPU Cooler Clearance | 170mm |
| Pre-Installed Fan(s) | Front: 2 x 120mm (High Airflow Fan), Rear: 1 x 120mm (High Airflow Fan) |
| Fan Support | Top: 120/140mm*2, Front: 120/140mm*3, Rear: 120mm, Inside: 120mm*2 |
| Radiator Support | Front: 120/140/240/280/360mm, Top: 120/140/240/280mm, Rear: 120mm |
| Lighting Support | Front ARGB LED Strip*1 |
| PSU Support | Bottom Mount, ATX, up to 180mm (200mm if HDD cage removed) |
Accessory Bag Contents
- Standoff Remover (1)
- Motherboard Screw (33)
- SSD Screw (6)
- PCIE Screw (6)
- HDD Screw (8)
- Internal Speaker (1)
- Cable Tie (5)
Installation Steps
1. Removing Glass Side Panel
After opening the glass door, take out the glass vertically.
2. Motherboard Installation
Supports ATX/Micro-ATX/Mini-ITX motherboards.
3. GPU Installation
Supports GPUs up to 350mm (or 310mm if a front radiator is installed). The rear PCIe slot features a reusable design.
4. PSU Installation
Supports up to 180mm high-end power supplies. This can be extended to 200mm if the HDD cage is removed.
5. 2.5" SSD Installation
Details on installing 2.5" SSDs.
6. 3.5" HDD & 2.5" SSD Installation
Details on installing 3.5" HDDs and 2.5" SSDs.
7. Radiator Installation
Supports front radiators up to 360mm, top radiators up to 280mm, and rear 120mm radiators.
8. Fan Installation
Supports up to three 120/140mm fans at the front, two 120/140mm fans at the top, one 120mm fan at the rear, and two 120mm fans internally.
9. ARGB Control
Mode Switching: Short press the LED button.
Turn Off Light: Press and hold the LED button for 3 seconds.
Motherboard Sync: Connect the ARGB wire to the motherboard and long press the LED button for 5 seconds.
Important Notes
Specifications are subject to change without notice. Actual products and accessories may differ from illustrations (except for omissions and typographical errors). Shipping contents may vary by country or region. Certain trademarks may be considered the property of others.
MONTECH © 2022
Note: The product is described as "Good Value!"
Related Documents
 | Montech SKY TWO PC Case User Manual Comprehensive user manual for the Montech SKY TWO PC case, detailing specifications, component installation (motherboard, GPU, PSU, SSD/HDD, radiators, fans), and I/O port functions. Includes multilingual support information. |
 | Montech KING 95 PC Case User Manual and Specifications Detailed specifications, component breakdown, and installation guides for the Montech KING 95 and KING 95 PRO PC cases. Learn about fan and radiator support, drive bay configurations, I/O interfaces, and cable management. |
 | Montech AIR X SERIES PC Case User Manual User manual for the Montech AIR X SERIES PC case, detailing specifications, installation, and compatibility for components like motherboards, graphics cards, and cooling systems. |
 | Montech AIR 1000 Series PC Case User Manual User manual for the Montech AIR 1000 Series PC case, covering specifications, installation, compatibility, and ARGB controller features. Includes content in English, Czech, Slovak, Hungarian, and German. |
 | Montech AIR 1000 Series PC Case: Specifications and Installation Guide Comprehensive specifications, features, and installation guidance for the Montech AIR 1000 Series PC case, detailing component compatibility, cooling support, and accessory contents. |
 | Montech XR PC Case: Specifications and Installation Guide Detailed specifications, features, and installation instructions for the Montech XR computer case, including component compatibility and assembly steps. |
 | YR10F RC Car Setting Sheet - Tyronne Wilken's Setup Detailed technical specification and setting sheet for the YR10F RC car, featuring Tyronne Wilken's setup from the Welkom SARDA Nationals. Covers suspension geometry, shock settings, motor, battery, ESC, radio systems, and tire treatments. |
 | MKey PRO Firmware Update Guide A step-by-step guide for updating the firmware of the Montech MKey PRO keyboard using the QMK Toolbox. |