Blaupunkt FUNLINE Antenna

Product Overview

The Blaupunkt FUNLINE is an active antenna designed for installation on vehicle glass. It enhances reception for AM, FM, and DAB/DAB+ radio signals with its integrated amplifier. The antenna features an illuminated indicator that signals its operational status.

Scope of Delivery

The package includes the circular antenna unit with an attached cable, several circular adhesive pads, triangular mounting guides, and various small accessories such as screws and cable clips.

Installation Guide

1. 1. Mounting Position

   Select a suitable position on the vehicle's windshield. Note: The antenna is not suitable for mounting on metallic-coated or heat-protection windows.

   Diagram description: Shows two mounting positions (A and B) on a car's windshield, illustrating the placement relative to the steering wheel and dashboard.

2. 2. Preparation

   Ensure the mounting surface is clean and dry. The optimal temperature range for adhesive application is indicated.

   Diagram description: A temperature gauge illustrates the optimal range for adhesive application.

3. 3. Mounting

   Carefully peel off the protective backing from the adhesive pad and apply the antenna to the chosen position on the glass. Note: The adhesive pad will stick immediately on contact and cannot be repositioned.

   Diagram description: Shows applying the antenna to the glass, possibly with a triangular guide.

4. 4. Cable Routing

   Route the antenna cable along the vehicle's interior trim, such as the A-pillar, towards the car radio. Use provided clips or guides as needed to secure the cable neatly.

   Diagram description: Illustrates routing the antenna cable along the car's interior trim, possibly using clips.

5. 5. Power and Signal Connection

   Connect the antenna unit to the car radio's antenna input and the power supply. The illuminated indicator on the antenna unit shows its operational status and can be switched off.

   Diagram description: Shows connecting the antenna cable to the radio unit, and potentially a power connection. The diagram also illustrates the electrical connections: Auto. Ant. +12V, AM/FM, DAB/DAB+.

6. 6. Finalizing Installation

   Secure the main antenna unit in its final position, ensuring all cables are managed properly.

   Diagram description: Shows securing the main antenna unit, possibly with a screw or clip, and final cable management. It also demonstrates the operation of the illuminated ring on the antenna unit, showing it can be turned ON or OFF.

Safety Notes

• Disconnect the negative terminal of the vehicle's battery before starting installation or connection work.
• Always observe the vehicle manufacturer's safety instructions, especially concerning airbags, alarm systems, trip computers, and immobilizers.
• Exercise caution when drilling holes to avoid damaging vehicle components like the battery, cables, or fuse boxes.
• Use cable grommets to protect cables passing through sharp-edged holes.
• Route antenna cables at a sufficient distance from other cable harnesses to prevent interference.

Technical Data

Warranty and Disposal

Blaupunkt provides a manufacturer's warranty for products purchased within the European Union. For terms and conditions for products purchased outside the EU, please refer to the respective country's representative or visit www.blaupunkt.com.

For disposal, please utilize the available waste return and collection systems.