for SOVOL models including: Zero 3D Printer, 3D Printer, Printer

User manual

Shenzhen Liandianchuang Technology Co.,LTD SOVOLZERO 3D printer 2BG3I-SOVOLZERO 2BG3ISOVOLZERO sovolzero

File Info : application/pdf, 28 Pages, 5.55MB

GetApplicationAttachment.html?id=8140351

User Manual
V1.3

Dear customers:
Thank you for choosing Sovol printers! Sovol is committed to providing excellent machines to 3D printing enthusiasts all over the world .This manual is designed for SOVOL ZERO owners to start their SOVOL ZERO printing journey.We still recommend all the SOVOL ZERO owners to read the manual carefully even if youare familiar with the 3D Printing technology, as there are lots of important information about the SOVOL ZERO for you to learn and help you get better printing exprience .In this manual there are some tutorials can be found on official website and group, you can scan the QR-codes.
sovol support group sovol official website

Catalogue

1 Note

2 Equipment Parameters

3 Package List

4 Unboxing

Final renderings

5 Function List

6 Knob screen

7 Start-up

8 Enable camera

9 Fill Filament

10 Slicing Software

11 Factory Settings

12 Air Filter

13 OTA

14 Obico

15 Motherboard

16 Nozzle adapter

Note
Do not use the printer any way other than described here in order to avoid personal injury or property damage. Do not place the printer in the environment with large vibration or other instability. The shaking of the machine will affect the printing quality of the printer. Please do not place the machine in inflammable and explosive materials or near high heat source. Please place the machine in a ventilated, cool and dust free environment. It is recommended to use the material recommended by the manufacturer to avoid machine damage. Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet. Please do not open the plastic cover during usage, otherwise the printing will be interrupted. Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage. Please wait a moment to remove the print after the print is finished. It's not recommended to use the third party firmware or mainboard etc, or the warranty will be void. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface. Children under 10 years should not use the printer without supervision. This machine is equipped with a security protection mechanism.Do not manually move the nozzle and printing platform mechanism manually while booting up,ot herwise the device will automatically power off for safety. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Sovol will not be responsible for any violators' legal liability under any circustance. Regularly clean the rails and leadscrews, and apply grease for maintenance.
02

Equipment Parameters

Model Software language Print method Type Number of nozzles Print size Recommend Printing speed Printing accuracy Nozzle diameter Nozzle temperature Hot bed temperature Applicable filament Diameter of filament File format supported Voltage Operation system Power supply

SOVOL ZERO English Network interface USB cord and WIFI FDM 1 152.4*152.4*152.4mm 500mm/s ±0.1mm 0.4mm (Replaceable) 350 120 PLA/ABS/PETG/TPU 1.75mm G-code AC 100~240V, 50/60Hz, Windows,Mac 150W/24V
03

Package List

Top Glass Cover

PEI Plate

Printer

Knob Screen
Tool Box

Gasket

Isolation column PTFE Tubing

Spool Holder

M3X16*2 M3*30*1 Power cord

Filament Detector

Filter protection cover

USB Flash Disk

Silicone brush

WiFi Antenna Scraper knife

Toolkit

Diagonal pliers

Brass and Hardened Steel Nozzle

Nozzle Cleaner and Zip Tie

Unboxing
Extruder Nozzle Auxiliary Cooling
Fan(Rear)
Knob Screen
Cable Ties
WiFi Antenna Spool Holder RJ45 Network Port
USB Port HDMI Port

Mian frame installation
Filament Detector Camera
Cavity heat dissipation and Air Filter Hot Bed
Power Supply Switch (Left Side)
05

Unboxing
Unpack the outer package, take the printer out of the box, and place it on the desk. After removing all the foam, put the other accessories aside, and follow the steps below for installation.

Screen Installation:

There are two screen cables

directly below the machine.

Insert each cable into its

corresponding hole in

sequence, then snap the

screen into the designated

slots at the bottom.

Installation of the rack: First, insert two M3X16 screws into the corresponding holes at the lower left corner and tighten them.
06

Unboxing

material breakage detection First, the PTFE tube on the extrusion nozzle should be threaded out of the fixed bracket (as shown), inserted into the material breaking detection, and then the M3x30 screw in the kit should be put into the pre-lock hole and locked.

M3*30 Isolation column

Isolation column
Gasket

Installation of WiFi antennas Take out the upper half of the WiFi antenna, insert the corresponding hole and tighten it in a clock -wise direction.
07

Unboxing
Installation of glass cover We turn the top corner of the machine, turn it outward (as shown), cover the glass cover and turn it back to complete the installation. Finally, The PEI plate needs to be placed on the hot bed first.
PEI plates need to be cleaned regularly to ensure that the surface is grease-free.
08

Unboxing
Final renderings
09

Function List
Updates may differ, please refer to the latest firmware version. If you have any questions during use, please contact us, and we will respond as soon as possible.
10

Knob Screen
1. Nozzletemperature 2. Heating bed
temperature 3. Printing
progress bar 4. Printer status

Mian

5. Fan rotation speed percentage
6. Printing speed
7. Printing progress time

Note: The current interface is for reference only, due to the continuous upgrading of functions, the actual latest software/firmware UI on the official website shall prevail.
1. Nozzle temperature: Displays the current temperature/preset value temperature of the nozzle
2. Heating bed temperature: Displays the current temperature/ preset value temperature of the heating bed
3. Printing progress bar: displays the printing progress percentage, starting printing 0% - printing completed 100%

4. Printer status:There will be four states appearing at this time.

1 Ready

: The machine is ready

2 Power Recovery 3 Factory Settings

: Power-resume print function : Factory reset

4 TiP code

: Knob screen code

5. Fan rotation speed percentage: displays the cooling fan rotation speed percentage, 0%-100%

6.Printing speed:displays the current printing speed.Printing speed can be adjusted with the knob.

7. Print progress time: Shows how long the print model has been completed.

Start-up
Use the USB flash drive included in the machine's accessory package and insert it into your . computer to access its contents. Search for the file named "wifi.cfg" within the drive. 2.Open the "wifi.cfg" file using Notepad; this action resembles the example displayed on the right. Enter your WiFI network name (SSID) and password in the following format: - ssid=your_WiFi_network_name - password=your_WiFi_password Example: - ssid= WiFi NAME - password= WiFi Password 3.After entering your WiFi info, save the "wifi.cfg" file, ensuring it remains in the USB's root directory. *Please make sure you type in the correct WiFi info.
4.Power on the machine, enter the system and then plug the USB port into one of the two USB ports on the right side of the machine.Once inserted, pause for 15-20 seconds before continuing.
5.Press the knob to select `Show IP" and wait for 5-10s. The IP adress of your home network will appear.If 127.0.0.1 appears, we need to check if the Wi-Fi account and password in the USB drive's files are correct, or if the USB drive is properly inserted, and then restart the machine to perform the above actions again.
6.After the machine is connected to Wi-Fi, press the knob again to select the autocalibration function, the machine will automatically calibrate and then restart.
12

Ecanmabelrea
Enable camera
After the machine successfully connects to the network, operate "Show ip" on the screen to obtain the machine's network IP. We need to enter the IP address in the web interface within the same LAN to log in to mainsail (accessible from both mobile devices and computers). Please follow the steps below to enable the camera.
13

Ecanmabelrea
14

Fill Filament
Use the scissors in the accessory kit to cut off the end of the filament at a 45° angle.
Steps to insert filament: Insert the filament into the hole of the filament runout sensor until it reaches the end. When the consumables cannot be inserted any further, complete the stepof inserting filament.
Make sure the filament are loaded correctly & are engaged with the extruder gears.
Select the "Load Fil" function, the heating block will heat up,reach the specified temperature value, the E-axis extrusion motor starts to rotate, the E-axis motor rota -tion process can check whether the consumables have been loaded, confirm the extrusion normal, the loading of consumables step is completed. After completing the consumables procedure, if no consumables appear in the nozzle, repeat the preceding operations.
After the nozzle is loaded with the required filament, it is essential to check if there is any leftover filament on the nozzle. If there is leftover filament on the nozzle, the return to zero reset will be inaccurate, and the nozzle will scratch the PEI plate, which damages both the nozzle and the PEI plate, significantly reducing print quality and performence.
Please keep it clean
15

Slicing Software

The latest version in official website shall prevail

OrcaSlicer_2.2.0_x64

Files installed in the USB "OrcaSlicer".

Select add "SOVOL ZERO"
Select and add the model you want to print.
You can view the Show Ip during printing
16

Factory Settings
1 During the 3D printing process, if the filament runs out, the machine will
trigger the material break detection warning, and we need to unload the residual filament.

When loading new filaments, you need to

feed the filaments through the material

breaking detection to the extrusion wheel of the nozzle, then select to load the

filament. Once filament is extruded from

the nozzle, select to continue printing; if

the filament fails to extrude, release the

extruder handle, remove the filament, and

repeat the above steps.

3
During the unloading process, the air tube connector on the front end needs to be removed, and the remaining filaments should be taken out.

Air Filter Air filtration system installation

When you need to print hightemperature filaments such as ABS, PC, CF,nylon,etc., you need to take out the filter protection cover in the accessery pack, align the hole on the air filter and install it As shown in the following pictureto start printing.

Filter protection cover

OTA
OTA upgrade When our firmware version is at a lower version, please update the firmware version in a timely manner. This update can be completed by operating on the device itself.

.Click on `Advanced'

.Click on `OTA'

.Click

The system will check for updates, wait for the updates to complete, and the machine will automatically restart.After the update, please power off and restart.
During system checks, if it is already the latest version, "latest version" will be displayed.
19

Obico
Obico Download a. For Android users: visit the Google Play store,search for"Obico" and select install app. b. For iOS users: Visit the Apple APP Store, search for "Obico", and then select Install APP. c. Via Web interface: If you want to access via Web interface https://obico.io 1. Start the Obico operating interface of the printer and follow the steps below. 2. Connect the Obico software on your phone. Open Obico downloaded from the above website

.Click on `SKIP'

.Click on `Sign Up/Sign in'

.Register an account, enter .Enter the account information

the information, and click

and click on `SIGN IN'

on `SIGN UP'

Obico

.Click on the menu page

.Link New Printer

.Click

.Click
21

.Click

Obico
Select the obico function on the machine and a 5-digit verification code will appear.
Printer connected successfully
Updates may differ, please refer to the latest firmware version. If you have any questions during use, please contact us, and we will respond as soon as possible.
22

Motherboard
23

aNdoazpztlee r
24

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

sovol support group sovol official website
SHENZHEN Liandianchuang Technology CO., LTD. Official Website: sovol3d.com E-mail: info@sovol3d.com

References

WPS 演示