Bluetooth Headphone User Manual
Model: EMBT-01
Packing List
- Headphones EMBT-01
- 3.5MM Audio Cable
- Type-C Cable
- User Manual
Diagram
The diagram shows the following numbered parts of the headphones:
- 1: "+" button: Volume up / Next song
- 2: "-" button: Volume down / Previous song
- 3: Power on/off, Music play/pause button ⏻
- 4: 3.5mm jack
- 5: Bluetooth indicator, charging indicator
- 6: Type-C charging port
- 7: Microphone
- 8: Call button / 3 EQ Mode button
Power On/Off
Power On: Press and hold the power button ⏻ for approximately 2 seconds until the blue indicator lights up for 3 seconds. The red and blue indicators will flash alternately, indicating pairing status. You will hear the voice prompt "power on" and "pairing".
Power Off: Press and hold the power button ⏻ for approximately 2 seconds. The red indicator will light up for about 1 second and then turn off. You will hear the voice prompt "power off".
Pairing
Turn on the Bluetooth switch on your mobile device or other compatible device (e.g., PC, Tablet). Search for the Bluetooth device list and find the pairing name "EMBT-01". Click on "EMBT-01" to connect the headset. Once paired successfully, you will hear the voice prompt "connected", and the blue indicator will flash every 6 seconds.
An illustration depicts a smartphone displaying a Bluetooth connection interface, with the 'EMBT-01' device selected for pairing. Arrows indicate the process from the headphones to the phone.
Music Play
| Action | Control |
|---|---|
| Volume up | Click the "+" button to increase volume. |
| Volume down | Click the "-" button to decrease volume. |
| Next song | Press and hold the "+" button for approximately 2 seconds. |
| Previous song | Press and hold the "-" button for approximately 2 seconds. |
Calling (Mobile)
| Action | Control |
|---|---|
| Answer call | Click the call button when a call is coming. |
| End call | Click the call button when the call is over. |
| Reject call | Press and hold the call button for approximately 2 seconds when a call is coming. |
| Redial | Double-click the call button to redial the last called number. |
EQ Switch
There are 3 different EQ modes available: Bass mode, Pop mode, and Vocal mode. While playing music, click the call button to switch between the different EQ modes.
Other Functions
- Siri: In standby mode or music mode, press and hold the call button for approximately 2 seconds to activate Siri.
- Reset: Press and hold the "+" and "-" buttons simultaneously for approximately 3 seconds until the red and blue indicators flash alternately.
- Low battery alert: The indicator will flash slowly with the voice prompt "didi".
Charging
Before use, please ensure the battery has sufficient charge. While the Bluetooth headset is charging, the charging indicator will show a red LED light. The light will turn off once fully charged.
An illustration shows a Type-C cable connecting to the charging port of the headphones. Accompanying battery icons illustrate the charging status.
Technical Data Sheet
| Type | Feature | Description or Details |
|---|---|---|
| BT | Version | 5.1 |
| Paring name | EMBT-01 | |
| Operated distance | 10M | |
| Transmission range | 2402-2480MHz | |
| Diameter | Ø40±0.05mm | |
| Speaker | Frequency Response | 50HZ-5KHZ |
| Impedance | 32Ω±15% | |
| Sensitivity/S.P.L. | 121±3dB (At 1000Hz) | |
| Rated Power | 10mW | |
| Battery | Type | Rechargeable lithium battery |
| Capacity | 600mAh |
Manufacturer Information
Manufacturer: Shenzhen Jiuhu Technology Co., LTD
Address of manufacturer: 4/F, Building E, BafangZhigu, Huanguan South Road, Guanlan Street, Longhua District, Shenzhen
[CE logo] ♻️
FCC Compliance
FCC ID: 2A9OY-EMBT-01
Made in: China
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
