COB LED lighting addition for slotted riser by UKPenguin | Download free STL model | Printables.com
MODEL ONLY 3D COB LED lighting addition for slotted riser U UKPenguin VIEW IN BROWSER updated 18. 8. 2025 | published 18. 8. 2025 Summary Add COB LED light bars the the Centauri Carbon. In my experience this is needed even for the CC with light bars. 3D Printers > Other Printer Parts & Upgrades Tags: carbon riser elegoo centauri I have printed the excellent sliding riser from Ccraft3d https:// www.printables.com/model/1292227-v2-new-elegoo-centauri-carbonsliding-riser-with-p My CC is the latest revision with the new light bars. But, even with these, I was not satisfied with the lighting. This model is an easy bolt on add-on for the slotted riser onto which you can stick 12V or 24V COB LED bars. (I used these: https:// www.amazon.co.uk/dp/B0DRJPRJ78? ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) You will need to drill 2.5mm holes in the riser and then screw these LED supports in using M3x10 bolts. The LEDS are angled down into the printer and give you way better lighting with no glare. This remix is based on V2 NEW - ELEGOO CENTAURI CARBON Sliding riser With PTFE tube relocation by Ccraft3d Model files left_right_led_bar.stl front_led-bar.stl left_right_led_bar.3mf front_led_bar.3mf License This work is licensed under a Creative Commons (4.0 International License) Attribution-NonCommercial | Sharing without ATTRIBUTION | Remix Culture allowed | Commercial Use | Free Cultural Works | Meets Open DefinitionWeasyPrint 62.0