Name and Content of Harmful Substances in the Product
| Part Names | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|
| Printed Circuit Board Components | O | O | O | O | O | O |
| Housing and Other Small Structural Parts | O | O | O | O | O | O |
O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit specified in GB/T 26572.
X: Indicates that the hazardous substance in at least one homogeneous material of the part exceeds the limit specified in GB/T 26572.
The parts marked "X" in the form are harmful due to the limitations of global technological development. Substitutions of substances are not yet feasible.
Printed circuit board components, including printed circuit boards and their parts, electronic components, etc. Depending on the product model, the product you purchased may not contain all the above parts.
⑩ Electronic and electrical products sold in the People's Republic of China must be marked with this logo. The number in the icon represents the product's environmental protection use period under normal use conditions.
Warranty Statement
Disclaimer
This manual does not provide any form of guarantee, position expression, or other implication. The mentioned products, specifications, and information are for reference only, and the content will be updated on the web at any time, without further notice.
Warranty Information
The product attached to this document is guaranteed as follows: If the product is damaged due to quality issues under normal use within twelve (12) months ("Warranty Period") from the date of purchase, it will be repaired free of charge. If the manufacturer confirms it cannot be repaired, it will be replaced free of charge. Repaired or replaced products will continue to enjoy the warranty for the remaining warranty period (minimum 30 days). The purchase date is based on the sales invoice date. If the purchase date cannot be determined, the warranty period will be calculated as thirteen (13) months from the product's production date. To apply for warranty, please contact the product service hotline first and execute it as instructed. When applying for warranty, you need to provide an accurate, complete, and clearly filled-out valid sales invoice.
The above guarantee does not apply to the following situations:
- Alteration of the warranty card, product code, or product body discrepancies.
- Damage or malfunction caused by misuse, abuse, or improper transportation, use, maintenance, or storage.
- Failure or damage caused by force majeure (such as earthquake, war, fire, etc.) or accidental damage.
- Zipper and buckle damage due to excessive force.
- Any damage caused by objects.
- Products with signs of burning or flooding.
- Damage caused by unauthorized disassembly.
- Aging, discoloration, abrasion, rupture, and other losses that occur during normal use of the product.
- If the original identification label of the product is changed or damaged, this guarantee will become invalid.
The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. Customers should check them on the spot when receiving the product and raise no objections.
The above warranties are guarantees provided by the manufacturer and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law.
Service Supervision Hotline: 400-812-0102
After-sales Email: frank@szeysan.cn
"Lenovo" and "thinkplus" are trademarks of companies owned by Lenovo Group. The names of other companies, products, and services may be trademarks of other companies.
Copyright © 2022 Lenovo Group and its licensors. All rights reserved.
