Onn. Bluetooth FM Transmitter Voice Assistant

Overview

This device is a Bluetooth FM Transmitter that also supports Voice Assistant functionality and hands-free calling. It features multiple RGB light modes and 30W charging via USB-C and USB-A ports.

Features:

• Push voice button to wake up voice assistant (Smart Device)
• Hands-free calling with built-in microphone
• Bluetooth connection to mobile device (A2DP)
• 8 RGB light modes
• 30W charging (USB-C and USB-A)

Controls

The device has several control buttons:

• VOICE BUTTON: Press to wake up Voice Assistant, press twice for private call/hands-free call, press for 5 seconds to clear Bluetooth connection.
• ANSWER/HANG UP Button: Press to answer call, press twice to call back, press to end/reject call.
• NEXT Button: Press for next track, press for 2 seconds to switch to Bluetooth/AUX.
• PREVIOUS Button: Press for previous track.
• Remote Control: Includes a remote for various functions.

Operation

Setup:

1. Insert the DC plug into a 12V/24V DC port. The display will show vehicle battery voltage, FM station, and Bluetooth indicator status.
2. Stick the remote control in a suitable place using the 3M sticker.
3. Turn on the vehicle radio and select an unused FM station (e.g., FM 107.9).
4. Press the 'FM' button for 2 seconds to enter FM station setting. Use '+/-' buttons to adjust frequency by 0.1MHz, or long press to skip.
5. Note: If sound quality is poor, try another unused FM station.

Pair Device (Bluetooth):

• Ensure the device is powered on; the Bluetooth indicator will flash in 'Pairing Mode'.
• Connect your smartphone to the 'onn. Voice Bluetooth FM' device.
• A voice confirmation will indicate a successful connection.
• Note: Use the source device for track controls (e.g., 'Back', 'Next', 'Pause/Play').

Select Source (Bluetooth, AUX Input):

Press the 'AUX IN' button for 2 seconds to change the source.

Voice Assistant:

• Download and set up the 'Native Voice' app on your smartphone (iOS and Android) using the provided QR code.
• Connect the 'Native Voice' app with the 'onn.' device by following the on-screen instructions.
• Enable one or more voice assistants (like Siri or Google Assistant) within the app.
• Note: Voice Assistants are available over Bluetooth, not AUX.
• To use a voice assistant: Press the VOICE BUTTON on the device, hear a tone, and then speak your command (e.g., "Hey iHeart, play Taylor Swift").

Hands-free Calls:

• Press the 'CAL' button to answer an incoming call.
• Press the 'CAL' button to end or reject a call.
• Press the 'CAL' button twice to redial the last number.
• Note: The status light will activate when the call button is pressed. You may also use the Bluetooth-connected device to disconnect the call.

Specifications

Legal

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician.

Bluetooth Trademark Statement

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Walmart Inc. is under license. Other trademarks and trade names are those of their respective owners.

Warranty

This product comes with a 1-year limited warranty covering defective parts. The warranty period lasts for 1 year (365 days) from the date of purchase. This limited warranty applies only to hardware components not subject to accident, misuse, neglect, fire, alteration, repair, or commercial use.

Safety Precautions

• CAUTION: Do not disassemble.
• Warning: Keep Dry.
• Warning: No harsh cleaning chemicals. Clean with a dry soft cloth.
• Warning: Flammable.
• Warning: Use 'Voice commands' when possible while driving.
• Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Troubleshooting