Bormann BWR5151 12V Air Compressor

Safety Instructions

Warning: Read the manual carefully before use. Failure to follow the warnings and instructions may result in damage to the unit, physical injury and/or damage to property. Store the manual in a safe place for future reference.

• Operate the air compressor only with a 12-volt electrical system.
• Use extreme caution when connecting the unit to a power source, as batteries can vent explosive gases.
• Avoid connections that could produce a spark.
• Consult the vehicle's owner's manual or a qualified mechanic for proper connection procedure.
• After 40 minutes of continuous operation, allow the unit to cool before restarting. Damage can occur from continued overuse.
• Do not lubricate the unit.
• The unit will become hot during use. Exercise caution when touching the unit, in order to avoid burns.
• Only hold the unit by the carry handle.
• Allow the air compressor to cool before storing.
• Only inflate tyres to the manufacturer's recommended pressure. Do not over inflate, as tyre failure or serious injury may occur.
• The use of work gloves and safety glasses is recommended when operating the air compressor.
• Keep the unit out of reach of children.
• Clean the unit with a damp cloth only. Do not use chemicals or soap.
• Do not use the air compressor for pumping, compressing or transferring any gas or liquid other than air. The unit is not designed for use as a source of breathable air.
• There are no user serviceable parts inside the unit. Do not disassemble.
• High altitude and certain air temperatures can negatively affect the unit's performance.

Caution: Inflating small objects

Use extra caution when inflating small objects (for example, small tyres, bicycles tyres and sports balls). Pay close attention to the pressure gauge and be prepared to stop the unit quickly when the manufacturer's recommended inflation pressure is reached.

Operating Instructions

1. Place the unit on a dry and level surface. Attach the air filter to the front of the unit and finger tighten.
2. Connect the air supply hose to the unit using the quick connect fitting.
3. Check to ensure the valve stem is clean and free of dirt.
4. Connect the air hose by screwing the brass inflator onto the tire valve stem. Only finger tighten the inflator. Do not use any tool as you may damage the inflator or the valve stem.
5. Turn the compressor switch to "ON" and let air flow into the tyre.
6. Watch the gauge closely and stop the motor when the manufacturer's recommended pressure has been achieved.
7. Remove the inflator from the valve stem. Remember to replace the valve cover on the stem.
8. Disconnect the power cord. Remove the air filter.
9. Allow the unit to cool and place neatly in the carrying bag.
10. Store the unit in a dry place.

Technical Data

*The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.

*To ensure the safety and reliability of the product and the warranty validity, all repair, inspection or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

*Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

Warranty Information

The power tools have been manufactured according to strict standards, set by our company, which are aligned with the respective European quality standards. The power tools of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use and 12 months for chargers and batteries. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

Warranty Exemptions and Restrictions:

• Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chargers, chucks etc.).
• Tools damaged as a result of non-compliance with the instructions of the manufacturer.
• Tools poorly maintained.
• Use of improper lubricants or accessories.
• Tools given to third entities free of charge.
• Damage due to an electrical connection at a voltage other than that indicated on the appliance plate.
• Connection to a non-earthed power supply.
• Change in current voltage.
• Damage resulting from the use of salty water (e.g., washing machines, pumps).
• Damage or malfunction resulting from improper cleaning procedure of the tool.
• Contact of the tool with chemicals, or damage as a result of moisture or corrosion.
• Tools that have been modified or opened by unauthorized personnel.
• Broken parts/components as a result of inappropriate use.
• Tools used for rent.

The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specific spare part the company reserves the right to replace the tool with another corresponding model. After all warranty procedures have been concluded, the warranty period of the tool shall not be extended or renewed. Replacement of a spare part with repair charge is covered by a 1 year warranty of good operation, subject to compliance with the warranty terms. The spare parts or tools that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding power tools repair or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.