Televes QSD85 85x95cm Aluminum Satellite Dish Antenna
Model: S85QSD-W | Part Number: 790304
Product Overview
The Televes QSD85 is an 85x95cm aluminum satellite antenna designed for optimal satellite signal reception. Part of the QSD (Quality Satellite Dish) series, these antennas are manufactured to high standards and undergo rigorous, precise testing to ensure superior performance and durability.
[Image Description: A white, oval-shaped satellite dish antenna made of aluminum, mounted on a dark gray adjustable arm and bracket system. The Televes logo is visible on the dish.]
Key Features
- Converter holder made of zamak casting, with adjustable height.
- Mounting bracket ensures stability of the installed antenna.
- Dimensions, construction, and technical specifications reflect maximum precision.
- Pre-assembled arm and bracket for faster installation (4 simple steps).
- Very stable structure and long lifespan due to a solid and durable rear support.
- Hot-dip galvanized arm.
- Integrated cable management system.
- Aluminum reflector, galvanized rear support, and stainless steel screws for a long-lasting solution.
- Approved by TÜV Nord (German certification body).
- Optional multi-satellite configuration (4 SAT) supporting up to 20° separation (Part Nos. 790901 and 790902).
- Features the Televes logo.
Specifications
Physical Data
| Attribute | Value |
|---|---|
| Net Weight | 12,640.00 g |
| Gross Weight | 12,640.00 g |
| Width | 989.00 mm |
| Height | 895.00 mm |
| Depth | 1,072.00 mm |
| Main Product Weight | 8,544.00 g |
| Color | White |
| Power Supply | Not included |
| Delivery Method | Single packaging |
Technical Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10.7 ... 12.75 GHz |
| Gain (11.75GHz) | 39.5 dBi |
| Offset Angle | 27.2° |
| Elevation Angle | 10 ... 80° |
| Beamwidth | 1.98° |
| Cross-polarization Discrimination | 0.6000 |
| Antenna Height | 955 mm |
| Antenna Width | 850 mm |
| Satellite Antenna Material | Aluminum |
| LNB Holder Diameter | 40 mm |
| Wind Load (@130Km/h) | 672 N |
| Wind Load (@150Km/h) | 924 N |
| Mast Diameter | 45 ... 90 mm |
Packaging
- Box: 1 pc
- Pallet: 12 pcs
Installation Guide
Thanks to pre-assembled elements, the installation of QSD series antennas consists of 4 simple steps:
- Step 1: Attach the converter holder arm to the main mounting bracket assembly. The holder is made of zamak and its height is adjustable. [Diagram shows arm attachment to bracket].
- Step 2: Mount the satellite dish onto the assembled arm. Ensure the mounting bracket provides stability. [Diagram shows dish attachment to arm].
- Step 3: Install the LNB into the holder on the arm. The holder diameter is 40mm. [Diagram shows LNB installation].
- Step 4: Secure the entire assembly onto a mast. The mast diameter should be between 45mm and 90mm. [Diagram shows pole mounting].
- Step 5: Make final adjustments to the antenna's position for optimal signal reception. The elevation angle can be adjusted between 10° and 80°. [Diagram shows final aiming adjustments].
- Step 6: Fine-tune the antenna alignment using the adjustment mechanisms (labeled 'a', 'b', 'c' in diagrams) for precise aiming. [Diagram shows detailed adjustment points].
The antenna features a hot-dip galvanized arm, galvanized rear support, and stainless steel screws for long-term durability. It is also approved by TÜV Nord.
