Amegat LCQ3110 Wireless Charger User Manual

Charging Your Devices

Place only compatible devices on this product. Do not place anything other than compatible devices on this product.

When disposing of this product, follow the instructions of each local government and dispose of it correctly. This symbol ? indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

This wireless charger is able to provide fast charging up to 15W for iPhone 12 and later models running on iOS 17 or higher. A charger above 30W is recommended for better performance.

Provides fast charging up to 5W for Apple Watch 7 series and later.

Provides fast charging up to 5W for AirPods Pro 1/2, AirPods 2/3, and other models with wireless charging cases.

Product Care and Precautions

Keep away from liquids and extreme heat.
Do not leave it in a humid, extremely hot, or cold place for a long time.
It is normal for the device to heat up slightly when charging. If it gets too hot to operate, stop charging immediately.
The body and internal electronic components may break down, leading to an accident such as fire or electric shock. Do not disassemble or modify.
Charging while there is an object (especially metal) between the product and a device may cause heat or fire. Remove the case or smartphone ring that contains metal before charging.
Do not bring magnetic cards (credit cards, cash cards, etc.) close to the product. Amegat is not responsible for any damage to card data due to the influence of magnets.
If you use a cardiac pacemaker, consult your doctor before using this product.

LED Indication

Power on: White light on for 10s and then turn off.
Standby Mode: Light off.
Charging in process: Breathing light for 10s and then turn off.
Charging completed: Solid white for 10s and then turn off.

Compatibility

Phone: iPhone 12 / 13 / 14 / 15 series, other Qi certified phones (with Magnetic phone case).
Apple Watch: Apple Watch Ultra 2 / Ultra / SE / 8 / 7 / 6 / 5 / 4 / 3 / 2.
Earphones: AirPods Pro 1 / 2, AirPods 2 / 3, and other models with wireless charging case.

Specifications

Model: LCQ3110
Input: USB-C in: 5V 3A / 9V 3A / 12V 2.5A
Output: Phone magnetic wireless out: 5W / 7.5W / 10W / 15W (Max); Watch magnetic wireless out: 5W Max; Earphone wireless out: 5W Max
Dimensions: 154 x 102 x 102mm / 6.06'' x 4.02'' x 4.02''
Weight: 285.4g / 10.07oz
Operating temperature: 0~35℃ / 32~95℉
Storage temperature: -20~60℃ / -4~140℉

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.