CoolStar® 3445 Designer Series Luminus LED Star Cooler ø34.5mm
Mounting Instructions
Patented, high performance Luminus LEDs are the brightest and most versatile solid state light sources available today, redefining the solid state lighting landscape by enabling the adoption of LED technology into emerging markets. Luminus technology is used in commercial and industrial lighting fixtures, theatrical lighting, projectors, signs, medical equipment, UV curing... just about anywhere a bright, efficient, reliable, long-life light source is needed.
Mounting Indicator Marks Overview
MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad or a phase change thermal pad with a thickness of 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be pre-applied from MechaTronix.
CoolStar® 3445 Technical Specifications:
- Dimensions: Ø34.5 x H45 mm
- Thermal Resistance (Rth): 8.13 °C/W
- Power Dissipation (Pd): 6 W
A diagram shows the CoolStar® 3445 cooler with circular mounting points indicated by orange dots.
Luminus Gen 4 COB Array
Model Names:
- CXM-3 (Pico-COB)
- CXM-4 (Pico-COB)
- CXM-6
- CIM-9
- CLM-9
Mounting:
- With Zhaga Book 11 LED holder
- BJB spotlight connector 47.319.6060
- BJB spotlight connector 47.360.1020
- Ideal Industries Chip-Lok™ holder 50-2002P
- Bender+Wirth 434 Typ 2
- Mounting with 2 screws M3 x 6mm
- Orange indicator marks
Visuals show a square Luminus LED module and a white heatsink assembly designed for this module.
Luminus Gen 3 COB Array
Model Names:
- CXM-6 (AC)
- CIM-9 (AC)
- CLM-9 (AC)
Mounting:
- With Zhaga Book 11 LED holder
- BJB spotlight connector 47.319.6060
- BJB spotlight connector 47.360.1020
- Ideal Industries Chip-Lok™ holder 50-2002P
- Bender+Wirth 434 Typ 2
- Mounting with 2 screws M3 x 6mm
- Orange indicator marks
Visuals show a square Luminus LED module and a white heatsink assembly designed for this module.
Luminus Dynamic COB Warm Dimming Modules
Model Names:
- CDM-6
Mounting:
- With Zhaga Book 11 LED holder
- BJB spotlight connector 47.319.6380
- Mounting with 2 screws M3 x 6mm
- Orange indicator marks
Visuals show a square Luminus LED module and a white heatsink assembly designed for this module.
