The JTD18G-H5CH audio extractor "extracts" the audio signal from an HDMI input and converts it into a 2 channel L/R analog stereo output or SPDIF optical ...
FRONT PANEL 1. DC 5V: This unit uses a DC 5V/1A power adapter 2. POWER LED: This LED will illuminate to indicate that the unit is receiving power 3. EDID SWITCH Allows users to select the audio EDID (Extended Display Identification Data) format according to TV, 5.1 Channel, or 2 CH: TV: Bypass or pass-through mode. The audio and video EDID will come
JTD-322 JTD18G-H5CH GUIDE J-TECH DIGITAL J-TECH DIGITAL SUPPORT TEAM 1-888-610-2818 SUPPORT@JTECHDIGITAL.COM JTD-322 JTD18G-H5CH GUIDE The JTD18G-H5CH audio extractor "extracts" the audio signal from an HDMI input and converts it into a 2 channel L/R analog stereo output or SPDIF optical multichannel output. This guide provides the instructions you will need to properly setup, connect and operate your JTD18G-H5CH audio extractor. KEY FEATURES HDMI 2.0b (18Gbps), HDCP 2.2 compliant Supported resolutions up to 4K@60Hz (YUV444) 10bits HDR pass through Supports HDMI (HBR) audio pass through Supports CEC bypass Audio sample rates up to 192kHz Panel Descriptions FRONT PANEL 1. DC 5V: This unit uses a DC 5V/1A power adapter 2. POWER LED: This LED will illuminate to indicate that the unit is receiving power 3. EDID SWITCH Allows users to select the audio EDID (Extended Display Identification Data) format according to TV, 5.1 Channel, or 2 CH: TV: Bypass or pass-through mode. The audio and video EDID will come from the HDMI output device that is connected to the extractors HDMI output port. (NOTE: This mode will not support Dolby Digital+. When in 5.1CH mode, audio output will only be from the HDMI, and SPDIF output ports. 5.1 will not be supported through the L/R analog output.) 5.1 CH: This mode relays EDID for 5.1 channel audio from HDMI and SPDIF optical output ports. LPCM 2CH: Sends audio EDID requesting that the source device outputs 2CH audio. (NOTE: When in 2CH mode, audio output will only be stereo/PCM from the HDMI, SPDIF, and L/R analog output ports.) 4. HDMI IN: This port is used to input a source device for audio extraction. Examples include a Streaming device, Blu-Ray/DVD player, PC/MAC computer, and Set-Top Cable Box. 5. LINK LED: This LED will illuminate when an HDMI input signal is detected. REAR PANEL 1. HDMI OUT: Output source HDMI audio/video. 2. L/R OUT: Connect to an audio component (speaker, amplifier, etc.) or TV L/R input. 3. SPDIF/OPTICAL: Output PCM/2CH or 5.1 Dolby Digital audio formats (NOTE: The SPDIF/Optical output will support PCM/2CH, and 5.1 Dolby Digital audio format. This audio output will not support 5.1 Dolby Digital+.) Application DescriptionMicrosoft Word 2016