Lamp w/wireless charger

Product Outline

The product is a desk lamp with an integrated wireless charger. It features a flexible lamp-post for adjustable positioning and an LED lamp at the top. The base includes a USB charging port and a wireless charging panel.

The base of the lamp contains a touch-sensitive lamp switch, the LED lamp module, a circular wireless charging panel, and a non-slip mat on the underside.

Specifications

• Model No.: ENZ1002-BLK
• FCC ID: 2ASCK-GW11
• Input: DC 5V 2A, 9V 2A
• Output: 10W
• Led Lamp Power: 2W
• MID#: 3930721
• Made In: China

Standard Accessories

• Wireless charger with Lamp x 1pc
• USB A to USB C charging cable x 1pc
• User manual x 1pc

Instructions

1. Power Connection: Connect the wireless charger to an AC power source using the provided power adapter. The charger will turn on, with the indicator showing green for 3 seconds, then switching to blue for standby mode. The flexible gooseneck allows for easy adjustment of the lamp's position.
2. Wireless Charging: Place compatible phones onto the wireless charging area on the base. The indicator light will flash blue while charging. Once the phone is fully charged, the blue indicator light will remain solid.
3. Lamp Operation: Touch the lamp switch to turn the LED lamp on. The lamp offers three lighting modes: strong cold light, strong warm light, and dim warm light. Touch the switch again to turn the lamp off.
4. Foreign Object Detection: If a metal foreign object is detected on the wireless charging coil surface, the charger will stop outputting power. Remove the foreign object to restore normal operation.

Attention

1. Keep the charger away from water or other liquids.
2. Ensure the charger is powered off before leaning on it.
3. Operating Environment:
   • Working Temperature: -0~45℃
   • Storage Humidity: 45~85%RH

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Compliance Logos

[wireless charging symbol] (Qi) [FCC logo] (FCC) [WEEE symbol - crossed out wheelie bin] (WEEE)