Secop NLE11MN Compressor Technical Data
Model: NLE11MN
Voltage: 115-127V 60Hz
Sales Code: 105H5980
Single Pack Information
Single Pack Code Number: 195B4359
| Position | Title | Code | Amount |
|---|---|---|---|
| 1 | Compressor NLE11MN | 105H5980 | 1 |
| 2 | Starting relay | 117U7020 | 1 |
| 3 | Starting capacitor (240uF 125V, 6.3mm) | 117U5073 | 1 |
| 4 | Cord relief | 103N1010 | 1 |
| 5 | Cover | 103N2011 | 1 |
| 6 | Bolt joint for one compressor | M6 | diameter 16mm | 118-1917 | 1 |
Compressor Design
Oil type: Polyoester
Oil viscosity: 32cST
Oil quantity: 298cm³ / 10.1fl.oz
Refrigerant(s): R290
Displacement: 11.15cm³ / 0.68cu.in
Refr. charge - tech. limit: 400g / 14.1oz
Free gas volume comp.: 2360cm³ / 79.8fl.oz
Weight: 12.14kg / 26.8lbs
Motor protection: 1# internal
Winding resistance main: 0.85Ω (at 25°C)
Winding resistance aux: 4.17Ω (at 25°C)
Max. winding temp.: 125°C / 257°F
Max. discharge temp.: 130°C / 266°F
Compressors on pallet: 80
General Configurations with NLE11MN
| Parameter | Conf. 1 | Conf. 2 | Conf. 3 | Conf. 4 |
|---|---|---|---|---|
| Motorconfiguration | CSIR | CSIR | RSCR | RSCR |
| Power supply (nominal) | 115V/60Hz | 115V/60Hz | 115V/60Hz | 115V/60Hz |
| Number of phases | 1 | 1 | 1 | 1 |
| Voltage range | 95-127V | 95-135V | 95-127V | 95-135V |
| Approvals | UL, CCC | UL, CCC | UL, CCC | UL, CCC |
| Starting torque | HST | HST | LST | LST |
| Note | -/- | -/- | -/- | -/- |
Applications with NLE11MN
| Parameter | Conf. 1 | Conf. 2 | Conf. 3 | Conf. 4 |
|---|---|---|---|---|
| Refrigerant | R290 | R290 | R290 | R290 |
| Application | MBP | MBP | MBP | MBP |
| System cooling | fan 3m/s | fan 3m/s | fan 3m/s | fan 3m/s |
| Hot gas defrost | OK | OK | OK | OK |
| Long interval pull down | OK | OK | OK | OK |
Electrical Data - Configurations with NLE11MN
| Parameter | Conf. 1 | Conf. 2 | Conf. 3 | Conf. 4 |
|---|---|---|---|---|
| Starting device type | relay | relay | PTC | PTC |
| Run capacitor | -/- | -/- | 23.5uF | 23.5uF |
| Start capacitor | 240uF | 240uF | -/- | -/- |
| LRA (locked rotor amps / 4s) | 40.23A | 40.23A | 41.7A | 41.7A |
| RLA (rated load amps / 1s) | 8.37A | 8.37A | 8.37A | 8.37A |
| Cut in current | 40.23A | 40.23A | 51.83A | 51.83A |
Compressor Dimensions
Housing Dimensions
| Dimension | Value (mm / in) |
|---|---|
| A Height | 203mm / 7.99in |
| B Height | 197mm / 7.76in |
| C Length shell | 205mm / 8.07in |
| D Length w. cover | 254mm / 10in |
| E Width | 166mm / 6.54in |
Connectors
| Parameter | Suction (X) | Discharge (Y) | Process (Z) |
|---|---|---|---|
| Diameter [mm] | øi 8.11-8.29 | øi 6.41-6.59 | øi 6.41-6.59 |
| (i:inside, o:outside) [in] | øi 0.32-0.33 | øi 0.25-0.26 | øi 0.25-0.26 |
| Material | copper | copper | copper |
| Horizontal angle | +2° | 0° | 0° |
| Vertical angle | +2° | 15° | 155° |
| Position l/h/w [mm] | 132/69/57 | 94/102/81 | -109/94/72 |
| Position l/h/w [in] | 5.2/2.7/2.2 | 3.7/4/3.2 | -4.3/3.7/2.8 |
| Straight tube l. [mm] | 12 | 12 | 12 |
| Straight tube l. [in] | 0.5 | 0.5 | 0.5 |
Diagram Description: A schematic shows the compressor housing with labels A, B, C, D, E indicating height, length, and width. Connector ports X, Y, Z are indicated with their angles and diameters. A diagram illustrates the orientation of connectors with vertical and horizontal angles.
Compressor Fixation
Diagram Description: Illustrations show methods for compressor fixation. One diagram depicts a 'Bolt joint' assembly with a baseplate, compressor, cabinet base, bolt, washer, nut, sleeve, and rubber grommet. Another diagram illustrates a 'Snap-on' assembly with a compressor base, clip, steel pin, cabinet base, washer, and rubber grommet. Tables provide dimensions for baseplates, large holes, and small holes.
Mounting Accessories
| Accessory | One Comp. | Multi Pack |
|---|---|---|
| Bolt joint | M6 | ø16mm | 118-1917 | 118-1918 |
| Bolt joint | ø1/4" | ø16mm | 118-1946 | 118-1919 |
| Bolt joint | ø1/4" | ø19mm | 118-1949 | |
| Snap-on | ø7.3 | ø16mm | 118-1947 |
Operating Conditions and Performance
Ambient/Machine Room Temperatures
Ambient temperature range: 10 - 43°C / 50 - 110°F
Machine room temperature range: 10 - 48°C / 50 - 119°F
Compressor cooling: fan 3m/s
Operation Pressure Range
Diagram Description: Two graphs illustrate the operation pressure ranges. The top graph shows Condensing Pressure (sat. temp.) versus Evaporation Pressure (sat. temp.), with lines indicating continuous and transitory operation. The bottom graph shows Condensing Pressure (bara) versus Evaporation Pressure (bara) for different temperature ranges.
Optimization + Standard Conditions
Diagram Description: A table presents performance data under various optimization and standard conditions, including evaporating and condensing pressures, return gas temperature, liquid temperature, cooling capacity (W, Btu/h, kcal/h), COP (W/W, Btu/Wh, kcal/Wh), EER, power consumption (P1 in W), current consumption (I in A), and reference mass flow (m in kg/h). Data is provided for different standards like ASHRAE MBP, cecomaf MBP, EN12900 MBP, and ARI540 MBP.
| Conditions | Cooling Capacity [W] | Cooling Capacity [Btu/h] | Cooling Capacity [kcal/h] | COP [W/W] | EER [Btu/Wh] | EER [kcal/Wh] | P1 [W] | I [A] | m [kg/h] |
|---|---|---|---|---|---|---|---|---|---|
| -7°C / 20°F pc= 54/131 RGT= 35/95 Tliq= 46/115 | 1202.7 | 4107 | 1035.1 | 2.04 | 6.97 | 1.76 | 589.1 | 7.15 | 13.72 |
| -10°C / 14°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 959.7 | 3278 | 825.9 | 1.71 | 5.83 | 1.47 | 561.8 | 6.96 | 12.14 |
| -10°C / 14°F pc= 45/113 RGT= 20/68 Tliq= 45/113 | 1058.4 | 3615 | 910.9 | 2.04 | 6.96 | 1.75 | 519.1 | 6.77 | 12.99 |
| -7°C / 20°F pc= 49/120 RGT= 18/65 Tliq= 49/120 | 1124.6 | 3841 | 967.8 | 2.00 | 6.83 | 1.72 | 562.1 | 7.01 | 14.60 |
| -10°C / 14°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 1101.8 | 3763 | 948.2 | 2.12 | 7.25 | 1.83 | 519.1 | 6.77 | 12.61 |
| -25°C / -13°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 594.0 | 2029 | 511.2 | 1.45 | 4.94 | 1.24 | 410.8 | 6.09 | 6.70 |
Performance Tables
Diagram Description: Detailed performance tables provide data across a range of operating conditions (condensing pressure, return gas temperature, liquid temperature) for specific evaporating pressures. Columns include Cooling Capacity (W, Btu/h, kcal/h), COP (W/W, Btu/Wh, kcal/Wh), EER, Power (P1 in W), Current (I in A), and Mass Flow (m in kg/h).
| Condition | Cooling Capacity [W] | Cooling Capacity [Btu/h] | Cooling Capacity [kcal/h] | COP [W/W] | EER [Btu/Wh] | EER [kcal/Wh] | P1 [W] | I [A] | m [kg/h] |
|---|---|---|---|---|---|---|---|---|---|
| -25°C / -13°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 594.0 | 2029 | 511.2 | 1.45 | 4.94 | 1.24 | 410.8 | 6.09 | 6.70 |
| -23°C / -10°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 642.1 | 2193 | 552.6 | 1.52 | 5.18 | 1.31 | 422.9 | 6.17 | 7.25 |
| -15°C / 5°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 912.1 | 3115 | 784.9 | 1.89 | 6.44 | 1.62 | 483.7 | 6.54 | 10.38 |
| -9°C / 15°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 1124.4 | 3840 | 967.7 | 2.15 | 7.34 | 1.85 | 523.0 | 6.79 | 12.87 |
| 0°C / 32°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 1558.6 | 5323 | 1341.3 | 2.67 | 9.11 | 2.29 | 584.5 | 7.21 | 18.08 |
| 4.4°C / 40°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 1799.8 | 6147 | 1548.9 | 2.95 | 10.08 | 2.54 | 609.9 | 7.38 | 21.03 |
| 10°C / 50°F pc= 45/113 RGT= 32/90 Tliq= 45/113 | 2139.1 | 7305 | 1840.9 | 3.36 | 11.46 | 2.89 | 637.3 | 7.58 | 25.28 |
| -25°C / -13°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 498.1 | 1701 | 428.7 | 1.18 | 4.03 | 1.01 | 422.5 | 6.09 | 6.20 |
| -23°C / -10°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 542.7 | 1853 | 467.1 | 1.24 | 4.23 | 1.07 | 438.1 | 6.18 | 6.77 |
| -15°C / 5°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 789.0 | 2695 | 679.0 | 1.53 | 5.22 | 1.32 | 515.9 | 6.66 | 9.92 |
| -9°C / 15°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 979.9 | 3347 | 843.3 | 1.73 | 5.90 | 1.49 | 566.8 | 7.00 | 12.40 |
| 0°C / 32°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 1367.3 | 4670 | 1176.7 | 2.11 | 7.20 | 1.82 | 648.2 | 7.57 | 17.56 |
| 4.4°C / 40°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 1582.1 | 5403 | 1361.5 | 2.32 | 7.91 | 1.99 | 683.0 | 7.83 | 20.49 |
| 10°C / 50°F pc= 55/131 RGT= 32/90 Tliq= 55/131 | 1884.1 | 6435 | 1621.5 | 2.61 | 8.91 | 2.24 | 722.4 | 8.13 | 24.70 |
Electrical Accessories / Wiring Diagram
Diagram Description: Schematics illustrate the electrical connections and components for different configurations (CSIR and RSCR). These include diagrams showing the main winding, winding protector, start winding, and associated components like relays, capacitors, plastic covers, and cord reliefs. Component lists with part numbers are provided for each configuration.
Components (Example for Conf. 1)
- a2: relay (117U7020)
- c: start capacitor (240uF, 6.3mm) (117U5073)
- b: plastic cover (103N2011)
- d: cord relief (103N1010)
Alternative Components (Example for Conf. 1)
- a2: relay (117U7020)
- c: start capacitor (240uF, 15kOhm) (117U5034)
- b: plastic cover (103N2011)
- d: cord relief (103N1010)
Similar component lists are provided for Conf. 3 and Conf. 4, detailing e-PTC starters and run capacitors.
Service and Repair Information
Diagram Description: Safety warnings are displayed for refrigerants R600a and R290, indicating flammability hazards ([alert] Warning: Flammable refrigerant). Instructions for brazing suction connectors are provided with diagrams showing correct and incorrect methods ([forbidden] symbol for incorrect, [approved] symbol for correct), along with recommended brazing solder (phosphor (LP7) or silver) and maximum temperature limits (max. 150°C/302°F at socket). A reference to a specific product bulletin 'Brazing on Suction Connectors' is included.
