User Manual for Tenda models including: I29 WiFi 6 AX3000 Wireless Dual Band Gigabit Access Point, I29, WiFi 6 AX3000 Wireless Dual Band Gigabit Access Point, Dual Band Gigabit Access Point, Gigabit Access Point, Access Point
Tenda I29 WiFi 6 AX3000 Wireless Dual Band Gigabit Access Point, Ceiling Mount, Roaming WLAN, MU-MIMO, OFDMA, Central Management, Multiple SSIDs, PoE/DC Power Supply, White : Amazon.co.uk: Computers & Accessories
1 giorno fa — Step 6: Click Use the following IP address option, then enter IP address. 192.168.0.X(here we take 192.168.0.11) and Subnet mask 255.255.255.0,.
12 hours ago —
How to modify the Wireless Network Name (SSID) of AP to be the same with your router. Background: When the router provide by the ISP deliver the weak signal in some location in your house, we can extend the Wi-Fi coverage through add Access Point (AP), please do following the steps as below. Caution 1. The IP address of AP is in the different IP segment of your router, so we need modify the IP address of your computer firstly to access the AP's Web management UI. 2. We need to change the computer's IP address obtain method to be Obtain an IP address automatically after the settings to make sure the computer can get the correct ip address from the router to access internet. Step 1: Connect the AP to your router wired following the topology on the top firstly. Step 2: Connect to your laptop to the router wirelessly Step 3: Click Start-> Setting->Network & Internet->More network adapter options to modify the IP address for your laptop Step 4: Right Click on wireless network adapter and click Properties Step 5: click Internet Protocol Version 4 TCP/IPv4 and click OK to next step. Step 6: Click Use the following IP address option, then enter IP address 192.168.0.X(here we take 192.168.0.11) and Subnet mask 255.255.255.0, then click Save to save settings. Note: the default IP address of AP is 192.168.0.254, we need make sure the computer and AP in the same IP segment. Step 7: Open the web browser and enter ip address of AP 192.168.0.254 in the address bar, then enter default username and password both admin and click Login to login into AP web management UI . Step 8: Click Quick Setup on the left menu to modify the wireless network name (SSID), Security Mode, Encryption Algorithm and password to be the same with your router. Here we set Tenda test as wireless network name (SSID), WPA2-PSK as Security Mode, AES as Encryption Algorithm and WiFi Password as example for both 5Ghz and 2.4GHz Radio Band. Then Click Save to save the settings. Step 9: If you want to manage AP after settings, you can modify the IP address of the AP in the same IP segment with the router. Click Internet Setting on the left menu, here we set IP address 192.168.5.254 as example. If not, just skip this step. Step 10: Modify the IP address obtain method from Use the following IP address to Obtain an IP address automatically to make sure your laptop can get the correct ip address from the router to access the Internet. (we can refer to step1 to step6) . Step 11: Please check whether you can access the Internet in each corner.WPS 文字