Product Details
This device is a Bluetooth Transmitter Adapter designed for use with the Nintendo Switch and other devices featuring a 3.5mm audio jack.
How it Works
The adapter transmits audio wirelessly via Bluetooth to your Bluetooth-enabled headphones or speakers. It supports a transmission range of up to 10 meters.
Power ON/OFF: Long press the power button for 10 seconds to turn the device on or off. A white light indicates it's on, and it will flash every 5 seconds. To turn off, long press the power button for 10 seconds until the white light turns off.
Bluetooth Pairing: After powering on, press the button twice to enter pairing mode. The indicator light will flash rapidly. Place your Bluetooth headphones or speakers near the product within the 10-meter transmission range. Once paired, the light will flash every 5 seconds.
Auto-Reconnection: The unit will automatically reconnect to the last paired device upon startup.
Charging
Connect the USB-C charging cable to charge the device. The red light is on when charging and turns off when fully charged. The device can be used while charging.
Multipoint Bluetooth
This device supports Multipoint Bluetooth, allowing connection to two Bluetooth devices simultaneously.
Compatibility
Supports Bluetooth devices that comply with Bluetooth 5.0. It also supports PD/QC charging protocols.
Specifications
- Model: CM324
- Part Number: 80188
- Bluetooth Version: 5.0
- Transmission Range: Up to 10 meters
- Audio Input: 3.5mm Audio Jack
- Charging Port: USB-C
- Supported Protocols: PD/QC
Notes and Warnings
- Keep the product away from magnets, high temperatures, and humid environments.
- Do not disassemble or modify the product.
- If the product freezes, there is a reset button located on the bottom.
- Ensure the product is within the effective pairing range of 10 meters.
- Avoid using the product in environments with strong electromagnetic interference.
- Do not expose the product to water or excessive moisture.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Package Contents
- 1 x UGREEN CM324 Bluetooth Transmitter Adapter
- 1 x USB-C Charging Cable
- 1 x User Manual
Warranty Information
UGREEN provides a limited warranty for this product. Please refer to the warranty card included in the package or visit the UGREEN website for details.
Contact Us
For customer support, please visit the UGREEN website or contact your local distributor.
