User Guide for SENNHEISER models including: Control Cockpit, EW-DX Control Monitoring and Firmware Updates, Control Cockpit EW-DX Control Monitoring and Firmware Updates, Control Cockpit Control Monitoring and Firmware Updates
For further instructions on how to use Sennheiser Control Cockpit, please refer to the following manual: Sennheiser Control Cockpit – Software Manual ...
il y a 5 jours — To control, monitor and perform firmware updates for EW-DX you will need our Sennheiser Control. Cockpit software. This document outlines how to install and ...
File Info : application/pdf, 3 Pages, 309.89KB
DocumentDocumentSennheiser Control Cockpit How-To Guide Sennheiser Control Cockpit: EW-DX control, monitoring and firmware updates To control, monitor and perform firmware updates for EW-DX you will need our Sennheiser Control Cockpit software. This document outlines how to install and configure Control Cockpit and update your EW-DX products. Installing Control Cockpit The installation file of the Sennheiser Control Cockpit software can be downloaded from the Sennheiser Control Cockpit product page: Control Cockpit audio software | Sennheiser Follow these simple steps to have the software installed: · Save the downloaded installation file SennheiserControlCockpitInstaller.exe on the host PC · Start the installation process · Click on Options if you want to change to standard settings of the installation · Adjust the settings as desired and click on OK · Please note to include http:// for the proxy URL · The installation window will be displayed again · Agree to the license terms and conditions · Click on Install · The Sennheiser Control Cockpit will be installed. Afterwards, the following dialog is displayed: Sennheiser Control Cockpit How-To Guide · Restart the host PC to start using Control Cockpit · Before using Control Cockpit for the first time you need to enter your Activation Key · Click on Get your activation key to open the following address: www.sennheiser.com/control- cockpit-registration · Click on Activate after you have received your activation key For further instructions on how to use Sennheiser Control Cockpit, please refer to the following manual: Sennheiser Control Cockpit Software Manual Sennheiser Control Cockpit How-To Guide Updating EW-DX Once Sennheiser Control Cockpit software is installed and activated, you can proceed to updating EWDX devices. Please follow these simple steps: · Connect EW-DX to the same network as your PC · EW-DX will be automatically discovered by Control Cockpit · Go to the device page and select the latest available firmware (firmware 1.1.3 as of November 2022), accept the license agreement, and update your receiver · Your EW-DX has been successfully updated For conformity, consistency and compatibility reasons, we strongly recommend always upgrading the system to the new release.