WITHOUT HEADBOARD

Assembly Instructions

Read all assembly and care instructions carefully before using this product. Save these instructions for future reference.

• Select a smooth, level surface to place the bed frame parts.
• Assemble components on a soft, clean surface to avoid scratching and/or damaging the finish.
• Ensure all parts are accounted for before disposing of packaging.
• ⚠️ WARNING: Risk of death or serious injury to children and animals. The plastic packaging of the Bed Frame is a potential suffocation hazard. Do not leave children or animals unsupervised with the empty packaging. Dispose of unnecessary packaging immediately.
• This package contains small parts. Keep away from children prior to and during assembly. Adult assembly is required. Screws left after assembly should be kept out of reach of children.
• Lift one long side and middle support legs before moving the bed.
• Adjust the center support legs 90 degrees to the ground before use.
• Only place the mattress after complete assembly and placement.

Note: The Bed Frame should be assembled by two adults. If assembling alone, be careful when lifting heavy parts. Ensure the assembly area is larger than the Bed Frame. Follow the steps carefully to assemble the Bed Frame correctly.

Diagram Description: An isometric view of the bed frame components laid out, illustrating the basic structure of the bed frame before assembly.

Hardware List

Diagram Description: Visual representations of each hardware item (bolts, washers) labeled with letters A through F, along with their quantities.

Diagram Description: An isometric view of the bed frame components, showing how they fit together, with parts numbered 1 through 7.

• Part 1: Side Rails (x2)
• Part 2: Footboard Posts (x2)
• Part 3: Headboard Posts (x2)
• Part 4: (Likely refers to the other set of posts, matching Part 3)
• Part 5: Center Support Beam (x1)
• Part 6: Support Legs for Center Beam (x3)
• Part 7: Slats (x2 sets)

Assembly Steps

Diagram Description: Detailed close-ups and isometric views showing specific connection points during assembly, referencing hardware and parts.

1. Step 1: Connect the side rails (1) to the headboard posts (3) and footboard posts (2/4). Use hardware C (Ø8 x 45 BOLT) and D (Washer).

   Diagram Callouts: Shows parts 1, 3, 4 and hardware C, D.

2. Step 2: Attach the other side rail (1) and footboard post (2/4) to the headboard post (3). Use hardware B (Ø8 x 35 BOLT) and D (Washer).

   Diagram Callouts: Shows parts 1, 2, 3 and hardware B, D.

3. Step 3: Install the center support beam (5) and its support legs (6). The center support beam (5) is secured with hardware E (M8) and D (Washer) to the frame. The support legs (6) are attached to the center support beam. Then, place the slats (7) across the frame.

   Diagram Callouts: Shows parts 5, 6, 7 and hardware E, D.

Important Information

Under normal use, this bed frame is designed to last for years. However, it is important to follow basic care tips to prolong its life.

Use & Care

• Your bed frame does not require special waxing or oiling. Dust at any time with a clean, dry, soft cloth.
• For deeper cleaning, use a damp, non-abrasive cloth with a solution of cool water and mild detergent. Immediately wipe dry.
• Moisture and heat can damage a wood finish. Promptly wipe up any spills or moisture. Avoid placing the bed frame too close to heat sources like HVAC vents and radiators.
• Avoid dragging sharp or rough objects across the surface of your wood bed frame to prevent scratches.
• Wood may expand and contract with seasonal humidity changes. Maintaining consistent humidity levels will minimize wood movement and help prevent warping.
• Over time, air and sunlight may change the color of natural wood. To prevent fading, avoid placing your bed frame in direct sunlight.
• Upon completion of assembly, ensure all screws, bolts, and fastening devices are securely tightened. Perform frequent checks.
• Ensure that your headboard is securely attached regularly.

Any modification or failure to follow the recommended care will void the product warranty.

Warranty Information

Thank you for choosing Latitude Run. We stand behind our brand and the quality of our items.

The Bed Frame comes with a 5-year limited manufacturing warranty that covers:

• Defects in material and workmanship.
• Cracked wood not caused by dry or extreme heat.
• Missing delivery parts or missing hardware.
• Scratches from shipping.

The warranty does NOT cover:

• Normal wear and tear.
• Products used commercially.
• Failures caused by accidents, abuse, alteration, modification, misuse, or improper care.

There are no other express warranties beyond the terms of this limited warranty. In no event shall any implied warranties, including merchantability and fitness for a particular purpose, extend beyond the duration of the express warranty contained herein. Latitude Run shall not be liable for incidental or consequential damages.

All products are carefully inspected prior to shipment. Please carefully inspect your bed frame at the time of delivery. Replacement parts or products will be sent at Latitude Run's discretion if the defect is the result of any fault on their side. Proof of purchase, with the date of purchase, as well as photos of the defective merchandise, must be provided. Photos are used to determine the cause of defects and for future quality control.

⚠️ WARNING! Latitude Run is not responsible for normal wear and tear, or for failures caused by accidents, abuse, alteration, modification, misuse, or improper care. No claims, representations, or warranties, whether expressed or implied, are made by Latitude Run as to the safety, reliability, durability, and performance of its products. In no event shall Latitude Run be liable for incidental or consequential damages.