Axkid SPINKID: Your Guide to Safe and Secure Travel

About the Axkid SPINKID

The Axkid SPINKID is an i-Size Enhanced Child Restraint System, approved according to UN Regulation No. 129. This manual provides essential information for the correct installation and use of your car seat, ensuring maximum safety for your child. For additional details, installation videos, and vehicle compatibility information, please visit www.axkid.com.

Important Safety Information

Prioritizing your child's safety is paramount. Please adhere strictly to the instructions within this manual. Incorrect installation can compromise safety. If you have any doubts, consult your retailer or Axkid directly.

• Always keep this manual for future reference.
• Never install the car seat in a seating position with an active frontal airbag unless the airbag is deactivated according to the vehicle manufacturer's instructions.
• Replace the car seat after any accident, regardless of severity, as damage may not be visible. Axkid advises against purchasing secondhand car seats.
• Ensure the car seat is not too hot before placing your child in it, especially after exposure to direct sunlight.
• Never leave your child unattended in the vehicle.
• Secure all loose objects in the vehicle to prevent them from becoming projectiles during an accident.
• Ensure the car seat is installed without trapping any parts of the vehicle's seats or doors.
• Do not attempt to modify or disassemble the car seat, as this will void the warranty and compromise safety performance.
• Always use the original Axkid textile cover, as it is an integral part of the seat's safety features.
• Consult the vehicle handbook and the Axkid website for compatible seating positions.
• Axkid recommends using a seat protector to prevent damage to your vehicle's upholstery.
• Always ensure the harness is correctly adjusted to fit your child snugly, with no slack in the straps. The harness should be tight enough that you cannot pinch the webbing between your fingers.
• Ensure the support leg is correctly positioned and firmly in contact with the vehicle floor, as it is crucial for safety in an accident.

Installation and Usage

This manual details the step-by-step process for installing and using the Axkid SPINKID, including:

1. Identifying all parts of the car seat.
2. Correct positioning within the vehicle.
3. Securing the seat using ISOFIX and the support leg.
4. Adjusting the harness and headrest for optimal fit.
5. Reclining the seat for comfort.
6. Removing the car seat from the vehicle.
7. Care and maintenance guidelines.

For detailed visual instructions, please refer to the diagrams within this manual or visit www.axkid.com for installation videos.