FAQ#169 How to set up the router to work as a AP mode

FAQ#169 How to set up the router to work as a AP mode

How to set up the router to work as a AP mode？ www.totolink.net Diagram Set up steps It is suitable for: N300RH V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU, T10 Method One : By T-bu on Applica on introduc on:

TOTOLINK

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 1 Pages, 926.20KB

Document Document

www.totolink.net
How to set up the router to work as a AP mode
It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU, T10
Applicaon introducon: AP mode,connect the superior AP/Router by wire, you can bridge the superior's AP/Router wired signal into wireless Wi-Fi signals for Wi-Fi devices. Here we take A3000RU for demonstraon. Note: Confirm that your wired network can share the Internet.
Diagram
Set up steps
STEP-1: Connect your computer to the router by cable or wireless, then login the router by entering hp://192.168.0.1 into the address bar of your browser. Note:The default access address varies depending on the actual situaon. Please find it on the boom label of the product. STEP-2:
Method One : By T-buon User Name and Password are required, by default both are admin in lowercase leer. Click LOGIN.
STEP-3: You need to enter the sengs page of the router, then follow the steps illustrated. Set 2.4G network->Set 5G network->Click the Apply buon
STEP-4: Enter the Advanced Setup page of the router, then follow the steps illustrated. Click Operaon Mode>Select Bridge Mode->Click Apply buon
STEP-5: Congratulaons! Now all your Wi-Fi enabled devices can connect to the customized wireless network. Note: Aer the AP mode is set successfully, you cannot log in to the management page. If you need to make changes, please Reset the router.