Hansgrohe Faucet Installation and Safety Guide
This document provides essential safety information and assembly instructions for Hansgrohe faucets. Please read carefully before installation.
Safety Instructions
- Warning: Wear gloves during installation to prevent crushing and cutting injuries.
- Ensure that pressure differences between hot and cold water supplies are equalized.
General Installation Notes
- The faucet must be installed, flushed, and tested according to valid norms and regulations.
- Inspect the product for any transport damage before installation. Claims for transport or surface damage will not be honored after installation.
Symbol Explanation
A sealant gun icon indicates the use of sealant.
A wrench icon indicates the use of a specific size wrench (e.g., SW 17 mm).
A pressure gauge icon indicates pressure testing.
A checkmark icon indicates approval or a tested product.
Important: Do not use silicone containing acetic acid.
Product Series and Model Numbers
Hansgrohe offers a variety of faucet series, including:
- PuraVida (Models: 15084XXX, 15085XXX)
- Metris (Models: 531162000, 31163000, 31085000, 31251000, 31086000, 31000XXX, 31003XXX, 31162000, 31163000)
- Talis (Models: 71732000, 71734000, 31618000, 31620000, 31611000, 72110000, 72111000)
- Steel (Models: 35113800, 35116800)
- Uno (Models: 38112XXX, 38115XXX, 38113XXX, 38116XXX, 38815XXX)
- Citterio (Models: 39113XXX, 39116XXX, 39112XXX, 39115XXX)
- Citterio M (Models: 34112000, 34115000, 34113000, 34116000)
- Citterio E (Models: 36106000, 36114000)
- Bouroullec (Models: 19125000, 19127000)
- Logis (Model: 71220000)
Dimensions and Installation Details
Refer to the diagrams for specific dimensions and installation hole spacing (typically 100mm center-to-center for wall-mounted fixtures).
Assembly Steps Overview
The assembly process involves several steps, including:
- Mounting the main body of the faucet.
- Installing cartridges and securing them with retaining rings.
- Connecting water supply lines.
- Testing for leaks and proper function, ensuring correct water pressure.
Technical Specifications and Approvals
The document lists various certifications and approvals, such as P-IX, ACS, WRAS, and ETA, indicating compliance with industry standards.
Contact Information
Hansgrohe SE
Auestraße 5 - 9
D-77761 Schiltach
Germany
Phone: +49 (0) 78 36/51-1282
Fax: +49 (0) 7836/511440
Email: info@hansgrohe.com
Website: www.hansgrohe.com
