Vieta Pro Transformer VHP-TW45 QuickStart Guide
Guía rápida
Transformer VHP-TW45
What's In The Box
Qué hay en la caja
- Safety & Warranty
- Quickstart Guide
- Transformer Earbuds (x1)
- Charging Case (x1)
- USB Type-C Cable (x1)
- Ear Tips (x1)
Charge
Carga
Connect the USB Type-C cable to the charging case and a power source.
Charging: The indicator light shows the charging status.
Power On/Off
Encender / Apagar
To Power On: Take both earbuds out of the charging case.
To Power Off: Insert both earbuds into the charging case and close the lid.
First Time Use: Remove the protective sticker from the earbuds, insert them into the case, close and open the lid again.
Buttons
Botones
Left Earbud (L)
- Play / Pause | Answer / End Call: Short Press
- Previous Track: Double Press
- Voice Assistant: Long Press
- Volume Down | Reject Call: Long Press
Right Earbud (R)
- Play / Pause | Answer / End Call: Short Press
- Next Track: Double Press
- Gaming Mode: Triple Press
- Volume Up | Reject Call: Long Press
Bluetooth Mode
Modo Bluetooth
Pairing: Take both earbuds out of the case. The earbuds will automatically enter pairing mode. Select 'Vieta Pro Transformer' on your device's Bluetooth settings.
Tech Specs
| Feature | Specification |
|---|---|
| Bluetooth version | 5.3 |
| Supported profiles | A2DP, AVRCP, HSP, HFP |
| Transmission distance | 10 m |
| Low latency mode | 30-50 ms |
| Waterproof | IPX3 |
| Box battery | Li-Ion 280 mAh |
| Earphone battery | 25 mAh |
| Play time | Up to 5 h |
| Total play time | Up to 15 h |
| Charging time | 1-2 h |
| Charging port | USB Type-C |
| Input power | 5V 0.3A |
| Dimensions | 65 x 55 x 32 mm |
| Weight | 43 g |
| Reset | Take both earbuds out of the case, press each earbud 5 times. |
Important Information
To prolong the battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. Do not expose Vieta Pro earphones to liquids without removing all cable connections and close the cap tightly. Do not expose Vieta Pro earphones to water while charging. It may result in permanent damage to the product and the power source.
Designed and engineered in SPAIN. Made in P.R.C.
VIETA® is a trademark of FRAMASON Audio, SA.
For more information, visit www.vietapro.com.
