Milwaukee M18™ FORCELOGIC™ Brushless Press Tool w/ One-Key™ Service Parts List
Bulletin No. 54-00-2922
Catalog No. 2922-20 | Revised Bulletin Date: Mar. 2022
Specify Catalog No. and Serial No. when ordering parts.
Starting Serial No. L38A
Service and Support Information
Due to the complexities of One-Key™ electronics and/or Hydraulic/Pneumatic construction in this tool, please contact the following for service-related questions and issues:
- e-Service: www.milwaukeetool.com/e-service
- Phone Support: 1.800.SAWDUST (1.800.729.3878)
- Find your closest Milwaukee authorized Hydraulic repair center: www.milwaukeetool.com
- Return to a MILWAUKEE factory Service Center location, freight prepaid and insured. A copy of the proof of purchase should be included with the return product.
Product Technical Support
- Phone: 262.783.8642
- Email: METProductSupport@milwaukeetool.com
Disassembly is not recommended and could void the warranty.
Parts Lists
An illustration of the Milwaukee M18 FORCELOGIC Brushless Press Tool head assembly is provided for reference. Exploded view diagrams illustrate component assembly. The following tables list available parts.
General Components
| Figure | Part No. | Description of Part | No. Req. |
|---|---|---|---|
| 2a | 44-60-2673 | Roller | (2) |
| 2b | 06-81-0011 | M5 x 8mm Cylinder Head Screw | (1) |
| 2c | Roller Head (Cradle) | (1) | |
| 2d | Cylinder Pin | (1) | |
| 2e | Spring | (1) | |
| 3 | Retention Bolt Assembly | (1) | |
| 3a | Retaining Pin | (1) | |
| 3b | Flat Gripper | (1) | |
| 3c | Snap Ring | (1) | |
| 43 | Battery Door | (1) | |
| 44 | 05-73-0015 | M3 x 10mm Pan Hd. Screw | (1) |
| 45 | 44-86-0111 | 3mm Retainer | (1) |
| 46 | 3mm Hex Nut | (1) | |
| 51 | 12-20-0326 | Service Nameplate | (1) |
| 52 | 3V Coin Cell Battery (CR2032) | (1) | |
| 60 | 42-55-2673 | Blow Molded Carrying Case-Tool Only | (1) |
| 65 | 10-20-5416 | Warning Sticker | (1) |
| 74 | 14-46-0272 | Roller Head Service Kit | (1) |
| 76 | 14-46-0276 | Retention Bolt Service Kit | (1) |
STREAMLINE™ ACR Press Jaws for use with M18 FORCELOGIC™ Press Tools
| Figure | Part No. | Description of Part | No. Req. |
|---|---|---|---|
| 90 | 49-16-2661M | Streamline™ Press Jaw Kit (Cont. 91-98) | (1) |
| 91 | 42-55-8986 | Blow Molded Carrying Case - for Streamline™ Jaws Only | (1) |
| 42-55-8985 | Blow Molded Carrying Case - for Tool and Streamline Jaw Kit | (1) | |
| 92 | 49-16-2650M | 1/4" Streamline™ Jaw | (1) |
| 93 | 49-16-2652M | 3/8" Streamline™ Jaw | (1) |
| 94 | 49-16-2653M | 1/2" Streamline™ Jaw | (1) |
| 95 | 49-16-2654M | 5/8" Streamline™ Jaw | (1) |
| 96 | 49-16-2655M | 3/4" Streamline™ Jaw | (1) |
| 97 | 49-16-2656M | 7/8" Streamline™ Jaw | (1) |
| 98 | 43-46-0014 | Crimp/Depth Gauge | (1) |
RLS® ACR Press Jaws for use with M18 FORCELOGIC™ Press Tools
| Figure | Part No. | Description of Part | No. Req. |
|---|---|---|---|
| 100 | 49-16-2662R | RLS® Press Jaw Kit (Contains 101-109) | (1) |
| 101 | 42-55-0106 | Blow Molded Carrying Case - for RLS® Jaws Only | (1) |
| 102 | 49-16-2650R | 1/4" RLS® Jaw | (1) |
| 103 | 49-16-2652R | 3/8" RLS® Jaw | (1) |
| 104 | 49-16-2653R | 1/2" RLS® Jaw | (1) |
| 105 | 49-16-2654R | 5/8" RLS® Jaw | (1) |
| 106 | 49-16-2655R | 3/4" RLS® Jaw | (1) |
| 107 | 49-16-2656R | 7/8" RLS® Jaw | (1) |
| 108 | 49-16-2657R | 1-1/8" RLS® Jaw | (1) |
| 109 | 42-36-0052 | Crimp/Depth Gauge | (1) |
