100 lb. 50 GPM Grease Trap with 4" Non-Threaded Connections
Regency Plumbing & Hardware Project: Date: Approval: Qty: Item #: 600GT50 Regency 100 lb. 50 GPM Grease Trap with 4" Non-Threaded Connections #600GT50 Features · 100 lb. capacity; 50 GPM · Includes external flow control fitting · 4" non-threaded connections · Steel construction with removable baffle · Dual handles help to pull the lid off Technical Data Length Width Height Capacity Flow Rate Inlet and Outlet Size Material Type 33 1/8 Inches 24 5/8 Inches 21 3/4 Inches 100 lb. 50 GPM 4 Inches Steel Grease Traps © 2025 Regency Plumbing & Hardware Regency Plumbing & Hardware Plan View Notes & Details Use this Regency 100 lb. 50 GPM grease trap to keep your restaurant code-compliant and make it easy to remove harmful, greasy substances from drainage lines! The greasy byproducts that go down the drain of prep sinks, pot sinks, and commercial dishwashers are difficult to process and can cause environmental issues if they enter the sewer, septic field, or a nearby wastewater treatment facility. Local plumbing codes may require a grease trap on these and other appliances to prevent this from happening. This trap has a grease capacity of 100 lb. and a flow rate of 50 GPM, with external flow control fitting and 4" non-threaded inlet / outlet connections to install it on your drain lines. Its steel construction and removable baffle make cleanout easy. Additionally, the lid features two convenient pull handles to make accessing the trap interior easier, too. WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov. © 2025 Regency Plumbing & Hardware