Periodically clean the string light, check connections and ensure no additional weight has been added. □ Re-lamp string lights only during dry and calm weather ...
SKU #1003 438 988 MODEL #72123/HD USE AND CARE GUIDE 48 FT COMMERCIAL STRING LIGHT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this 48 ft Commercial String Light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay! Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS Do not use these products outdoors unless marked suitable for outdoor use. When products are used outdoor applications, connect the product to Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. Do not mount or place near gas or electric heaters, fireplace, candles, or other similar sources of heat. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. Install only using the mounting means provided. Do not let lamps rest on the supply cord or on any wires. Do not hang objects from the cord, wire, or light string. Do not use this product for other than its intended use. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. Do not cover the product with cloth, paper or any material not part of the product when in use. Read and follow all instructions that are on the product or provided with the product. Connecting multiple sets: Add the wattage of each light string together for a total of 1200 Watts or less. .DO NOT EXCEED 1200 WATTS When connecting multiple sets protect connection(s) from direct exposure to rain and water. Do not allow connection(s) to become wet. CAUTION: RISK OF ELECTRIC SHOCK Do not use with extension cord near water or where water may accumulate. Keep lamps at least 16 feet (4.88m) from pools and spas. Keep plugs and receptacles dry. Do not submerse. WARNING: RISK OF ELECTRIC SHOCK Disconnect power at the source prior to wiring, re-lamping or servicing in any way. The light string kits are supplied with an attached three prong plug that will only fit into a three prong outlet. Do not alter the plug. SAVE THESE INSTRUCTIONS CAUTION: To reduce the risk of fire use only type S lamps, 11 watts maximum. To reduce the risk of fire do not deliberately reposition either lampholder contact. MODEL NUMBER: 72123/HD The lighting string is rated at 120V, 60Hz, 264 Watts. It is provided with 24 lampholders and 11 Watts S Type lamps. CONNECTING MULTIPLE SETS Maximum Wattage Number of String Lights 7.5 watts 11 watts 15 watts 20 watts 30 watts 6 sets 4 sets 3 sets 2 sets 1 set DO NOT EXCEED 1200 WATTS Before returning to your local Home Depot, please call our Customer Service team at 1-855-HD-HAMPTON or visit www.hamptonbay.com. Please reference your SKU (1003-438-988 48 FT COMMERCIAL STRING LIGHT). 2 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. Pre-Installation PLANNING INSTALLATION Read all instructions before installation. IMPORTANT Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occured during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-855-HD-HAMPTON. NOTE: Support cable and hardware not included (sold separately). NOTE: You may use bulbs of different wattages other than those included (sold separately). See chart below for details. CONNECTING MULTIPLE SETS Maximum Wattage Number of String Lights 7.5 watts 11 watts 15 watts 20 watts 30 watts 6 sets 4 sets 3 sets 2 sets 1 set DO NOT EXCEED 1200 WATTS PACKAGE CONTENT (parts are not to scale): A B Part Description A 48 FT HeavyDuty String Light B S14, Medium Base (E26) 11W Incandescent Bulbs Quantity 1 36 3 Installation INSTALLATION METHODS 1 Using a guide wire with S-hooks or temporary ties (not included) Attach guide wire to structural support Guide Wire (not included) S-hooks or temporary ties (not included) Attach guide wire to structural support 2 Attached to a structure Structural Support Screw hook Attach to structural support Minimum every 24 ft. Structural Support Screw hook Attach to structural support Minimum every 24 ft. Structural Support Screw hook 4 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. Installation (continued) RE-LAMPING STRING LIGHTS WARNING: RISK OF ELECTRIC SHOCK! Disconnect power at the source prior to re-lamping the string lights. For outdoor string lights, DO NOT re-lamp light strings during rain or when wet. Re-lamp string lights only during dry and calm weather conditions. Unscrew existing lamps by lightly holding the socket in one hand and twisting the lamp counterclockwise. Lamps may be tight in the sockets. This is normal to prevent moisture from getting into the socket. Replace with medium base lamps. Screw bulbs into the sockets clockwise until the top of sockets form a tight seal around the bulbs and the bulbs make contact with the sockets. Do not exceed 1200 watts all sets combined. Suitable for Incandescent, CFL or LED lamps. MAINTENANCE Periodically clean the string light, check connections and ensure no additional weight has been added. TROUBLESHOOTING PROBLEM The lights will not turn on. The fuse blows, or the circuit breaker trips, when the light is turned on. POSSIBLE CAUSES The bulb is burned out. The power is off. There is a faulty switch. There is a faulty wire connection. The bulb is not making contact with the terminal. There are crossed wires, or the power wire is grounding out. The receptacle circuit is overloaded. SOLUTION Replace the light bulb. Ensure the power supply is turned on. Test or replace the switch. Check the wiring. Check position of terminal inside socket. Discontinue use of the light string. Contact a qualified electrician or call the Customer Care Services Team. Connect to a different receptacle circuit. 5 Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSAdobe InDesign CC 13.1 (Macintosh) Adobe PDF Library 15.0