Manual-Hub.com - Free English product PDF Documents!
Instructions for CHANNEL VISION models including: C-1331 Mounting Bracket For Bose Amplifiers, C-1331, Mounting Bracket For Bose Amplifiers, Bracket For Bose Amplifiers, Bose Amplifiers
CHANNEL VISION C-1331 (01) PDF MANUAL - MANUAL-HUB.COM
File Info : application/pdf, 2 Pages, 1,022.06KB
DocumentDocument10 Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for ten years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided. Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton. This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center. Bose is a registered trademark of Bose Corporation, all rights reserved. C-1331 Mounting Bracket For BoseR Amplifiers C-1332 Hinged Mounting Plate For BoseR Amplifiers C-1355 50" Extender Ring For BoseR Amplifiers 500-148 rev B2 https://manual-hub.com/ The C-1331, C-1332, and C-1355 are accessories that extend the depth of Channel Vision's 50" enclosure and allow BoseR whole-house audio equipment to be mounted inside. Assembling the C-1355 1 Attach the long extension pieces to the left and right side of the enclosure as shown using the 10-32 x 0.375" screws. Note that the left and right pieces are not identical. Install them as shown. Installing the C-1332 Note: BoseR amplifiers sold separately. 1. Attach the BoseR amplifier to the back side of the C-1332 Hinged Mounting Plate. Shown here assembled 2. Attach this assembly to the C-1355 4 screws 10-32 x 1" (shown below). Installing the C-1331 4 screws 10-32 x 0.375" 1. Attach the BoseR amplifier to the front side of the C-1331 Mounting Bracket. 2. Mount this assembly in the enclosure using the snap pins (shown below). 2. Attach the short extension pieces to the top and bottom of the enclosure as shown using the 10-32 x 0.375" screws. Attach the C-1332 to the left extension Note: The top and bottom piece using the screws provided. sections of the C-1355 Note: There are 6 possible locations where the C-1332 have mounting holes for Hinged Mounting Plates can be attached to the C-1355 Extender Ring. the optional C-1334 fan kit. This provides the installer with multiple mounting options. However, to maintain proper operating temperatures, no more than 4 amplifiers 2 should be installed at one time. 3 https://manual-hub.com/