Thule Verse 2-bike 2", 2-bike 1.25"

Symbols

⚠ CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

ℹ️ Note indicates additional information that is useful for trouble-free and optimal use of the product.

Product Overview and Specifications

This document provides instructions for the Thule Verse bike rack, available for 2" and 1.25" hitch sizes.

Load Capacity

• 2" Hitch (903452): Max 60 lbs. (27.5 kg) per bike, Max 120 lbs. (55 kg) total.
• 1.25" Hitch (903453): Max 55 lbs. (25 kg) per bike, Max 110 lbs. (50 kg) total.

Important Note for Motorized RVs: For motorized RVs or van conversions with an overhang exceeding 230 cm (7.5 ft) from the center of the rear wheel, use only at 60% load capacity (40% total load reduction).

WARNING! This carrier is not compatible with travel trailers/caravans, 5th wheels, or any bumper-mounted hitch receiver.

Installation and Usage

The following steps outline the general installation and usage of the Thule Verse bike rack. Always refer to the detailed diagrams for precise assembly.

Step 1: Prepare the Hitch Mount

Ensure the hitch receiver dimensions are compatible. The hitch opening should be at least 1.5" (38 mm) deep.

Diagram Description: Shows two hitch receivers. One labeled 'ok' with 'X > 1.5"' and 'X > 38 mm'. The other labeled 'Not ok' with 'X < 1.5"' and 'X < 38 mm'.

Step 2: Attaching the Rack to the Vehicle

Insert the rack into the hitch receiver. Secure the rack using the provided hardware and torque wrench to 7.5 lb ft (10 Nm) or 18.4 lb ft (25 Nm) as indicated in specific steps.

Diagram Description: Illustrates inserting the rack into the hitch, securing it with a bolt and nut, and tightening with a torque wrench. Includes key and lock symbols indicating security.

Step 3: Securing the Bikes

Place bikes onto the rack's wheel trays. Secure the bike frames using the adjustable straps and locking mechanisms. Ensure bikes are positioned correctly to avoid contact with each other or the vehicle.

Diagram Description: Shows various configurations for securing one or two bikes, including frame straps and wheel holders. Includes 'ok' and 'Not ok' indicators for bike placement and spacing.

Bike Spacing and Fit:

• 2" Hitch (903452): Supports bikes with wheelbases from 20" to 29" and wheel sizes from 1" to 5" max.
• 1.25" Hitch (903453): Supports bikes with wheelbases from 33" min to 53" max.

Diagram Description: Shows diagrams illustrating correct and incorrect bike loading positions and spacing. Also shows wheel size and wheelbase compatibility.

Step 4: Final Checks and Locking

After loading and securing the bikes, double-check all connections and ensure the locking mechanisms are engaged. Use the provided keys to lock the rack and bikes.

Diagram Description: Depicts the final locking of the bike rack and bikes with keys. Includes a 'Click' sound indicator for secure locking.

Step 5: Driving Precautions

Observe speed limits and drive cautiously. Recommended maximum distance is 300 miles (500 km). Avoid sudden braking or acceleration.

Diagram Description: Shows a car with the bike rack attached, with arrows indicating forward movement. Includes a 'STOP' sign graphic.

Accessories

The following accessories are available for the Thule Verse:

• Thule Verse 2-bike add-on (903651)
• Thule lights and license plate kit (903670)
• Thule Verse bike repair holder (903680)
• Thule loading ramp foldable (933410)
• Thule transport wheels (903690)
• Thule One-Key System (compatible with various lock cylinder quantities: 450200 (x2), 450400 (x4), 450600 (x6), 450800 (x8))