HIFI WALKER H2 Hi-Fi Digital Audio Player FAQ List
How to Pair HIFI WALKER H2 with Bluetooth device ?
Enter the Bluetooth setting interface, choose "Bluetooth" and press the play/pause button (II) to turn on/off the Bluetooth function. When Bluetooth is enabled, the player will start scanning automatically. Alternatively, you can choose "Bluetooth scanning" manually. After scanning, the searched device will be listed under "available device". To ensure lossless sound quality transmission, turn on "high quality".
Please note:
- Make sure the device is disconnected from any external Bluetooth device.
- Put your Bluetooth device in discoverable mode (e.g., Bluetooth headphones or speakers).
If you have paired, yet still can't connect: Please scroll the wheel or press the skip forward/backward buttons (▶️ / ◀️) to choose from paired devices. Press the play/pause button (II) to connect/disconnect. Press the "M" button and choose "Yes" to delete the paired device and reconnect it.
Frequently Asked Questions
Can't power on the H2?
Long press the power button for about 3 seconds. Check if your operation is right. Long press the power button for about 3 seconds; check whether the player has run out of the power; connect the player to an adapter and charge it for about 10 minutes. If it still doesn't work, please contact customer service at Support@HIFIWALKER.COM.
Player freezes?
Press and hold the Power button for 8 seconds to reset the device. The status light will be off, and all settings will return to factory defaults.
Can't hear anything when playing music?
Check if the volume setting is too low. Check whether the headset has been plugged in or whether the headset is damaged. Ensure that you plug the headphone into the headphone port, not the line-out port. Check whether your music format is supported or whether it is damaged.
Can't transfer music files from computer?
Check if the player has connected to the computer. Check if the player is in USB mode. Navigate to Player settings > System settings > USB mode, and choose the appropriate option. Check whether the Micro SD card is correctly inserted and that the card is not damaged. Check if the Micro SD card has enough storage space.
Should the music files be loaded using a folder structure, e.g., Artist or Album, or put all the files flat at the root folder?
Either way works. However, organizing files into folders makes navigation easier.
How can I quickly find the exact song I need?
Navigate to Player > Category > Songs. Here, you can press the "M" button to quickly search for the exact song in alphabetical order.
Can I load and play audible books?
Yes, if the books are on your PC/laptop and in a compatible file format, they can be loaded and played.
My H2 Player won't work with my present iTunes...is it compatible?
No, unfortunately, it is NOT compatible with iTunes. This player functions more like an external hard drive. You simply plug it in, and an option to open it as a folder will pop up. You can then drag and drop your music. For more information, visit: Lifewire.com
How can the battery be replaced?
The unit is sealed, making battery replacement not possible.
When would you adjust the gain setting rather than volume?
You can set the Gain to High and use the volume to control the audio output from zero to max. The High setting provides a higher output when needed. The Gain setting is useful for adjusting to different headphones used with this player. Headphone impedance can range from 8 ohms to 64 ohms. The 8-ohm headphones would be louder at the same gain setting as 64-ohm headphones. The HIFI WALKER offers flexibility in its controls and input/output options.
Can I stream Spotify, Pandora, etc. from my Android phone via Bluetooth to this HiFi WALKER H2 to enjoy the sound quality?
Yes, the H2 supports high-quality Bluetooth streaming via Spotify, Pandora, etc.
Does the H2 Player support WPL or other playlist files? Can you create playlists on a PC and load them into the SD card?
The H2 Player supports *.m3u and *.m3u8 playlist files. You can use a player software like Foobar (foobar2000.org) to create these playlist files. Only *.m3u/*.m3u8 files need to be at the root folder of the SD card. The folder containing your target music does not have to be at the root folder.
When would you adjust the gain setting rather than volume?
You can set the Gain to High and use the volume to control the audio output from zero to max. The High setting provides a higher output when needed. The Gain setting is useful for adjusting to different headphones used with this player. Headphone impedance can range from 8 ohms to 64 ohms. The 8-ohm headphones would be louder at the same gain setting as 64-ohm headphones. The H2 Player offers flexibility in its controls and input/output options.
