Montech SKY TWO User Manual
This manual provides instructions for the Montech SKY TWO PC case.
Specifications
| Available Colours | Black / White |
| Dimensions (L*W*H) | 430x215x490 mm |
| Motherboard Support | ATX / Micro-ATX / Mini-ITX |
| Expansion Slots | 7 |
| Hard Disk Support | 3x 2.5"SSD / 2x 3.5"HDD |
| I/O Port | 2x USB 3.0 / 1x type-C / 1x microphone / 1x headphone / RGB Button |
| GPU Clearance | 400 mm |
| CPU Cooler Clearance | 168 mm |
| Dust Filters | Top, Bottom |
| Pre-installed fans | 2x Front 120 mm (Reverse ARGB PWM Fan) 1x PSU fan 120 mm (Reverse ARGB PWM Fan) 1x Rear 120 mm (ARGB PWM Fan) |
| Fan Support | Side 2x 120 mm Top 3x 120 / 2x 140mm PSU 2x 120 mm Rear 1x 120mm |
| Radiator Support | Side 120 / 240 mm Top 120 / 240 / 280 / 360 mm Rear 120 mm |
| PSU Support | 210 mm |
Accessory Bag
| Item | Quantity | Description (EN) |
| Restraint remover | x1 | Motherboard standoff screw |
| Motherboard screw/2.5" SSD disk screw | x33 | Screw for motherboard/2.5" SSD |
| PCIE Screw | x8 | PCIE Screw |
| 3.5" HDD Screw | x8 | Screw for 3.5" HDD |
| Buzzer | x1 | Buzzer |
| Cable tie | x10 | Cable tie |
| Motherboard standoff tool | x3 | Motherboard standoff tool |
| Fan screw | x8 | Fan screw |
| AIO screw | x12 | AIO screw |
| USB Anti-Dust plug | x2 | USB Anti-Dust plug |
| Audio ports Anti-Dust plug | x2 | Audio ports Anti-Dust plug |
| Type-C AntiDust plug | x1 | Type-C AntiDust plug |
Exploded View
Diagram showing the components of the Montech SKY TWO PC case:
- SSD Tray
- Controller
- Nameplate
- Right metal panel
- Dust filter
- Side reverse fan
- HDD Cage
- Front glass panel
- Front mesh panel
- Reverse fan
- PSU dust filter
- Left side mesh panel
- Left side glass panel
- PCI-E slot cover
- Rear exhaust fan
- Chassis
- Top mesh cover
Removing Side Panel
To remove the side panel, unscrew the thumbscrews at the back and carefully extract the glass panel.
Removing Front and Top Panels
To remove the top mesh cover, loosen the thumbscrews on the back and gently pull out the mesh cover. To detach the front glass panel, lift it upwards.
Removing Lower Side and Lower Front Panels
An optional feature allows for easy removal and cleaning of filters for efficient system maintenance.
Motherboard Installation
Supports ATX / Micro-ATX / Mini-ITX motherboards. Secure the motherboard using screws.
GPU Installation
Supports GPUs up to 400 mm in length. Install the GPU by removing the PCI-E slot cover and sliding the GPU into the slot.
PSU Installation
Supports 210 mm High-End Power Supplies. A 230 mm PSU can be installed if the HDD cage is removed. Slide the PSU into the designated bay and secure it with screws.
2.5 SSD Installation
Install 2.5" SSDs into the designated drive bays using screws.
3.5 HDD & 2.5 SSD Installation
Install 3.5" HDDs and 2.5" SSDs into the HDD cage or drive bays using the provided screws.
Radiator Installation
Radiator support:
- Top: 120 / 240 / 280 / 360 mm
- Side: 120 / 240 mm
- Rear: 120 mm
Mount radiators using screws in the appropriate locations.
Fan Installation
Fan support:
- Side: 2 x 120 mm
- Top: 3 x 120 / 2 x 140 mm
- PSU fan: 2 x 120 mm
- Rear: 1 x 120 mm
Install fans using screws.
Buttons and I/O
The front panel features the following I/O ports and buttons:
- USB Type-c
- USB 3.0
- Microphone
- Audio
- USB 3.0
- LED button
- Power button
Contact Information & Compliance
For support and inquiries:
- UK: www.alza.co.uk/kontakt, +44 (0)2035144411
- Czech Republic: www.alza.cz/kontakt, +420225340111
- Slovakia: www.alza.sk/kontakt, +421257101800
- Hungary: www.alza.hu/kapcsolat, +36-1-701-1111
- Germany: www.alza.de/kontakt, 08001814544
- Austria: www.alza.at/kontakt, +43720815999
Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 17000 Prague 7.
This equipment complies with the essential requirements and other relevant provisions of EU directives.
WEEE Information
Do not dispose of this product with household waste. Hazardous substances may harm health or the environment. Return this product to your retailer or use your city's selective waste collection service.
