IQ Engine v10.7.5 Release Notes - New Features, Fixes, and Known Issues
IQ Engine v10.7.5 Release Notes New Features, Fixes, and Known Issues 9039118-00 Rev AB February 2025 Copyright © 2025 Extreme Networks, Inc. All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice. Trademarks Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners. For additional information on Extreme Networks trademarks, see: https:// www.extremenetworks.com/about-extreme-networks/company/legal/trademarks Open Source Declarations Some software files have been licensed under certain open source or third-party licenses. End-user license agreements and open source declarations can be found at: https:// www.extremenetworks.com/support/policies/open-source-declaration/ Table of Contents Abstract................................................................................................................................................................................................................ iv Help and Support..........................................................................................................................................................................................v Subscribe to Product Announcements............................................................................................................................. v General Release Information for Release 10.7.5..................................................................7 Release Date............................................................................................................................................................................................7 New Hardware Supported........................................................................................................................................................... 7 Hardware Platforms Supported.............................................................................................................................................. 7 Management Platforms Supported.....................................................................................................................................7 New Features in Release 10.7.5................................................................................................. 9 Addressed Issues in Release 10.7.5......................................................................................... 11 Known Issues in Release 10.7.5................................................................................................13 Earlier 10.7 Releases....................................................................................................................14 Release 1: 10.7.1 New Features and Addressed Issues............................................................................................14 New Hardware Supported............................................................................................................................................... 14 Addressed Issues in Release 10.7.1...............................................................................................................................15 Release 2: 10.7.2 New Features and Addressed Issues.......................................................................................... 15 New Hardware Support......................................................................................................................................................15 Release 3: 10.7.3 New Features and Addressed Issues.......................................................................................... 17 New Hardware Support......................................................................................................................................................17 New features in 10.7.3............................................................................................................................................................17 Addressed issues in 10.7.3..................................................................................................................................................18 IQ Engine v10.7.5 Release Notes iii Abstract The release notes for IQ Engine version 10.7.5 detail new features, supported platforms, addressed issues, and known limitations. Key technical points include support for Real-Time Troubleshooting and Packet Capture over Inlets on 6E access points, Energy-Efficient Ethernet (EEE) on the AP5020, and Hotspot 2.0 configuration. The document also highlights the addition of AFC change notifications for channel or power requests, support for Chorus and HTTP Post for Wi-Fi 6E APs, and increased BLE tag entries for HTTP-Post batch reporting. Addressed issues include fixes for 802.1x authentication reoccurrence, PPSK user authentication failures, and various performance and connectivity problems. Known issues involve WPA3 client association problems and boot issues with non-Extreme micro-USB cables. The document provides details about the IQ Engine version 10.7.5 release, making it essential for network engineers handling large-scale wireless deployments. iv IQ Engine v10.7.5 Release Notes Help and Support If you require assistance, contact Extreme Networks using one of the following methods: Extreme Portal Search the GTAC (Global Technical Assistance Center) knowledge base; manage support cases and service contracts; download software; and obtain product licensing, training, and certifications. The Hub A forum for Extreme Networks customers to connect with one another, answer questions, and share ideas and feedback. This community is monitored by Extreme Networks employees, but is not intended to replace specific guidance from GTAC. Call GTAC For immediate support: (800) 998 2408 (toll-free in U.S. and Canada) or 1 (408) 579 2800. For the support phone number in your country, visit www.extremenetworks.com/support/contact. Before contacting Extreme Networks for technical support, have the following information ready: · Your Extreme Networks service contract number, or serial numbers for all involved Extreme Networks products · A description of the failure · A description of any actions already taken to resolve the problem · A description of your network environment (such as layout, cable type, other relevant environmental information) · Network load at the time of trouble (if known) · The device history (for example, if you have returned the device before, or if this is a recurring problem) · Any related RMA (Return Material Authorization) numbers Subscribe to Product Announcements You can subscribe to email notifications for product and software release announcements, Field Notices, and Vulnerability Notices. 1. Go to The Hub. 2. In the list of categories, expand the Product Announcements list. 3. Select a product for which you would like to receive notifications. IQ Engine v10.7.5 Release Notes v Subscribe to Product Announcements Help and Support 4. Select Subscribe. 5. To select additional products, return to the Product Announcements list and repeat steps 3 and 4. You can modify your product selections or unsubscribe at any time. vi IQ Engine v10.7.5 Release Notes General Release Information for Release 10.7.5 Release Date January 2025 New Hardware Supported There is no new hardware supported for Release 10.7.5. Hardware Platforms Supported · AP650 · AP650X · AP305C/CX · AP305C-1 · AP302W · AP510C/CX · AP410C · AP410C-1 · AP460C · AP460S6C · AP460S12C · AP3000 · AP3000X · AP4000 · AP4000-1 · AP5010 · AP5020 · AP5050D · AP5050U Management Platforms Supported ExtremeCloud IQ 25.1.0 and later IQ Engine v10.7.5 Release Notes 7 Management Platforms Supported General Release Information for Release 10.7.5 Related Links New Features in Release 10.7.5 on page 9 Addressed Issues in Release 10.7.5 on page 11 Known Issues in Release 10.7.5 on page 13 8 IQ Engine v10.7.5 Release Notes New Features in Release 10.7.5 This release of ExtremeCloud IQ Engine includes various compliance updates. Table 1: New features in 10.7.5 Feature ID New feature Description HOS-20193 Real-Time Troubleshooting (RTTS) and Packet Capture over Inlets IQ Engine supports near Real-Time Troubleshooting and datastream on the 6E access points, including AP3000/X, AP5010, and AP5050U/D. HOS-20268 Support 802.3az Green Ethernet for AP5020 IQ Engine supports Energy-Efficient Ethernet (EEE) or IEEE 802.3az on the AP5020. Enable EEE to permit the network port to switch between an active mode (during data transmission) and idle mode (when there is no Ethernet traffic). With this feature, physical layer transmitters consume less power when they are in a state of idleness or low data activity. HOS-20481 Hotspot 2.0 Configuration IQ Engine supports Hotspot 2.0 Support for IQ Engine configuration. HOS-21081 AFC: Change of channel or power notifications IQ Engine provides notifications for AFC change of channel or power requests, where the change disables radio, and also for the initial enabling of an AFC controlled radio. HOS-21083 Generic Scan: Chorus and HTTP Post support for Universal HW 6E APs IQ Engine supports Chorus and HTTP Post for all Wi-Fi 6E-capable APs. HOS-21182 WiFi 6 and 6E AP IOT Scans: By default, BLE scans have unique BLE Remove duplicate entries in entries. IQ Engine supports a CLI option HTTP post as default to remove duplicates that must be turned OFF if you prefer to receive multiple entries for same tag. On WiFi 6E APs this feature supports iBeacon and Generic BLE scans. On WiFi 6 APs, this feature supports iBeacon scans only. IQ Engine v10.7.5 Release Notes 9 New Features in Release 10.7.5 Table 1: New features in 10.7.5 (continued) Feature ID New feature Description HOS-21196 AP5020/AP4020 IOT Scans: By default, BLE scans have unique BLE Option to remove duplicate entries. IQ Engine supports a CLI option entries in HTTP post to remove duplicates that must be turned OFF if you prefer to receive multiple entries for same tag. On AP5020 and AP4020, this feature supports iBeacon, Eddystone and Generic BLE scans. HOS-21205 AP5020: Increase tag Up to 300 BLE entries are reported per entries for HTTP-Post batch batch interval in HTTP Post. On AP5020, reporting this feature supports iBeacon, Eddystone and Generic BLE scans. HOS-21208 AP5020 - Upgrade eSDK to The AP5020 supports eSDK 7.1.2. 7.1.2 HOS-21284 "RegreSSHion" Vulnerability CVE-2024-6387, also known as the in OpenSSH "regreSSHion" vulnerability is patched in this release. HOS-21355 HOS-21535 WiFi 6/6E AP: Increase tag Up to 300 BLE entries are reported per entries for HTTP-Post batch batch interval in HTTP Post. On WiFi 6E reporting APs this feature supports iBeacon and Generic BLE scans. And on WiFi 6 APs this feature supports iBeacon scans only. VLAN Counters support on IQ Engine supports the Show Interface AP5020 Vlan Counters command for AP5020. HOS-21701 HotSpot 2.0 Configuration In IQ Engine--11ax support To support the ExtremeCloud IQ Hotspot 2.0 feature, the 802.11ax APs (AP305C/X, AP410C, AP510C/X, AP460C/S6C/S12C) must run IQ Engine 10.7.5, or later. HOS-21829 HOS-21847 Fabric-Attach (Autosense) IQ Engine new Default LLDP Handling (3000/X, AP5010, AP5050) Add Port Description (TLV) to LLDP Neighbor (302W & 6E APs) IQ Engine 10.7.5 enables LLDP by default, for AP3000/X, AP5010, and AP5050U/D models. The Show lldp neighbor command includes the Port Description field. 10 IQ Engine v10.7.5 Release Notes Addressed Issues in Release 10.7.5 Table 2: Addressed issues in 10.7.5 Issue ID Description CFD-11844 (02871771) We resolved an issue where 802.1x authentication would reoccur on Eth0. CFD-12152 (02991956, 02994867, 02995713,02993534, 03007447, 03001635, 03053431) We resolved an issue where PPSK user authentication failed with incorrect password logs, in 10.7r2 with 802.11r enabled. CFD-12418 (03007758) We resolved an issue where, under certain conditions, the DCD Daemon was not running and causing errors on the AP5010. CFD-12492 We resolved an issue where Fabric Attach configurations were (03004220, 03016826) being removed on reboot after save config in sCLI. CFD-12675 (02668167) We resolved an issue where the CRC firmware check was failing. CFD-12722 (03022452) We resolved an issue where users were not receiving credentials after registering for the Guest network through the Captive Web Portal. CFD-12747 (02928391) We resolved an issue where one-way audio occurred on the AP5010. CFD-12756 We resolved an issue where Wireshark could not parse (02998905, 03051701) gratuitous ARP from AP as an LLC frame. CFD-12869 (03036308) We resolved an issue where the Logging flash was full of unnecessary logs, making it difficult to troubleshoot other issues. In releases earlier than 10.7.5, SNMP queries such as snmpwalk -c hivecommunity -v 1 10.254.157.99 .1.3.6.1.4.1.26928.1.2.7.0 generated logs similar to ah_dcd: application: handle_ahUptime sec = 1333, msec = 490. CFD-12871 (03036165) We resolved an issue where, under certain conditions, AP5020s would become unresponsive and performance would degrade. CFD-13093 (02928391) We resolved an issue where Spectralink VoIP phones displayed an Insufficient Bandwidth message after a roam. IQ Engine v10.7.5 Release Notes 11 Addressed Issues in Release 10.7.5 Table 2: Addressed issues in 10.7.5 (continued) Issue ID Description HOS-21436, We resolved various issues where the enhanced packet HOS-21437, HOS-21439, capture filters did not work. HOS-21440, HOS-21441 HOS-21840 We resolved an issue where Wireless clients disconnected from the AP5020 when packet captures were run. HOS-21941 We resolved an issue where packet captures were unexpectedly ending at 30 seconds on the AP5020. 12 IQ Engine v10.7.5 Release Notes Known Issues in Release 10.7.5 Table 3: Known issues in 10.7.5 Issue ID Description HOS-17683 Some WPA3 clients cannot associate to the AP4000 properly when band steering is enabled. Workaround: Disable band steering. HOS-18313 AP5010, AP5050D, and AP5050U devices will not boot when some non-Extreme micro-USB cables are connected. Note: For all Extreme Networks access points, use the Extreme Networks certified ACC-WIFI-MICRO-USB console cable. Other MICRO-USB console cables have not been certified by Extreme Networks. Workaround: Use an Extreme Networks certified console cable, or plug in the cable after the AP boots. IQ Engine v10.7.5 Release Notes 13 Earlier 10.7 Releases Release 1: 10.7.1 New Features and Addressed Issues on page 14 Release 2: 10.7.2 New Features and Addressed Issues on page 15 Release 3: 10.7.3 New Features and Addressed Issues on page 17 The following sections provide information about changes for earlier IQ Engine 10.7 releases. Release 1: 10.7.1 New Features and Addressed Issues New Hardware Supported Release 10.7.1 adds support for the AP5020. Table 4: New features in 10.7.1 Feature ID New feature Description HOS-18819 AP5020: Bring up Multi BLE For AP5020, we changed the iBeacon for Dual IoT Radio defaults. Old Defaults: · UUID: 4165726F686976654E6574776F726B73 (AerohiveNetworks) · MAJOR: 1 · MINOR: 1 New Defaults: · UUID: 00000000-0000-0000-0000-0000000 00000 · MAJOR: 0 · MINOR: 0 HOS-20002 AP5020 SDR Mode Configuration Phase 1 (Mode1 & Mode3) The AP5020 supports two radio modes with IQ Engine 10.7r1: · Mode 1 (Tri-Radio): 2.4 GHz (Radio-1), 5 GHz (Radio-2), 6 GHz (Radio-3) · Mode 2 (Dual 5 GHz w/ 6 GHz): 5 GHz (Radio-1), 5 GHz (Radio-2), 6 GHz (Radio-3) 14 IQ Engine v10.7.5 Release Notes Earlier 10.7 Releases Addressed Issues in Release 10.7.1 Table 4: New features in 10.7.1 (continued) Feature ID New feature Description HOS-20184 AP5020 - 320Mhz support We added AP5020 (WiFi 7) support for the 320 MHz channel, on the 6 GHz radio. HOS-20191 AP5020 : 4096-QAM 6G radio only We added AP5020 support for 4096-QAM on the 6 GHz radio. HOS-20501 Add Tier 1 Countries for GA release AP5020 We added support for the AP5020 (Wi-Fi7) Access Point to: USA, Canada, EU, Puerto Rico, Colombia, and United Kingdom HOS-20503 Add all Tier 1A Countries for AP5020 We added support for the AP5020 (WiFi7) Access Point to: Australia, New Zealand, Brazil, Mexico, Japan, South Korea, Singapore, South Africa, and UAE. HOS-20589 Wi-Fi7 802.11BE features 24r4 / 10.7.1 We added Phase 1 Wi-Fi 7 (802.11be) features to IQ Engine. HOS-20608 AP5020 SDR Phase 1: Allow only access mode on Wi-Fi interfaces The AP5020 provides support for client Access Mode only on the Wi-Fi interfaces. Mesh, sensor-mode and client mode support are currently not supported. Addressed Issues in Release 10.7.1 There are no new addressed issues for Release 10.7.1. Release 2: 10.7.2 New Features and Addressed Issues New Hardware Support There is no new hardware supported for Release 10.7.2. IQ Engine v10.7.5 Release Notes 15 New Hardware Support Earlier 10.7 Releases Table 5: New features in 10.7.2 Feature ID New feature Description HOS-18946 AFC: GA Ready AFC Solution AFC is now supported on IQ Engine specifically for the AP5050U & AP5050D. AFC support is a requirement for Standard Power use for outdoor 6 GHz radios. The AP must coordinate channel and power availability from an AFC SaaS database before transmitting. Thread router--Fix mdns We resolved an issue with mDNS advertisement when using advertisement when using non-default non-default vlan VLAN. Table 6: Addressed issues in 10.7.2 Issue ID Description CFD-9256 (02740906, 02762111, 02858831) IQE: ASCOM iP62 randomly drops calls on roaming failures. CFD-10640 (02903895) The AP302W Kernel and Hardware Watchdog crashes on 10.6.5. CFD-10962 (02926088) Universal APs: Beacons do not show updated WMM QoS values for Contention Window Min and Max. CFD-10995 (02901029) The length of R0KH-ID in the Reassociation Response is incorrect, causing an R0KH-ID mismatch and some clients to drop down the connectivity accordingly. CFD-11040 (02929452) [IQE] Delta config push issue sometimes causes ACL to not work as the AP IP-policy (firewall). CFD-11050 (02921799) [IQE] AP510C 10.6.6 getting "ah_auth" crash, often causing the client to reconnect, due to 32 characters limit. CFD-11167 (02938970) PPSK self registration: Security vulnerability with captive portal solution. CFD-11169 (02918590) Improper redirect--PPSK Self registration. CFD-11304 (02946092) AP5010s unable to establish a CAPWAP connection until after reset. HOS-20556 We increased the Dynamic Packet Capture file size from 50kb to 100k to address a scenario were captures were not showing up. HOS-20803 We resolved an issue with Client Monitor 2.0 and Dynamic Packet Capture not working for WPA3-ENT protected SSIDs. HOS-20992 We resolved an issue with the AP5020 ETH0 Wired speed showing as 10Mbps instead of 10Gbps on the D360 Wired Interface. 16 IQ Engine v10.7.5 Release Notes Earlier 10.7 Releases Release 3: 10.7.3 New Features and Addressed Issues Release 3: 10.7.3 New Features and Addressed Issues New Hardware Support There is no new hardware supported for Release 10.7.3. New features in 10.7.3 Feature ID HOS-20170 HOS-20275 HOS-20867 HOS-20688 HOS-20782 HOS-20947 HOS-20998 HOS-21002 HOS-21004 HOS-21160 New feature AP5020 Radio Mode Configuration Phase 2 (mode 5, 6) Description The AP5020 supports two new radio modes: · Mode 5 (Dual 5 GHz w/ 2.4 GHz: 5 GHz- Low (Radio 1), 5 GHz-High (Radio 2), 2.4 GHz Radio 3 · Mode 6 (Dual 6 GHz w/ 5 GHz): 6 GHzLow (Radio 1), 5 GHz-Full (Radio 2), 6 GHz-High (Radio 3) IQ Engine to Support WPA3+WPA2-Enterprise Transition Mode with 6GHz We enhanced IQ Engine to support transition mode on the legacy bands (2.4 GHz and 5 GHz) while simultaneously supporting the 6 GHz band. This enhancement introduces a new Protected Management Frames (PMF) setting, auto. For configuration options and the corresponding security settings, see ExtremeCloud IQ User Guide. AP5020: Support for 802.11mc The AP5020 now supports 802.11mc. AP5020: Support for The AP5020 now supports enhanced enhanced packet capture packet capture. AP5020: Support for dynamic packet capture The AP5020 now supports dynamic packet capture. AP5020: Enable iBeacon 'Cloud Reporting' Service We enabled the Cloud Reporting element for iBeacon for this release. Enable 6 GHz Radio for Taiwan for all Wi-Fi 6E and Wi-Fi 7 APs We enabled 6 GHz radio support for all WiFi 6E and Wi-Fi 7 access points, for Taiwan. Enable 6 GHz Radio for Philippines for all Wi-Fi 6E and Wi-Fi 7 APs We enabled 6 GHz radio support for all Wi-Fi 6E and Wi-Fi 7 access points, for Philippines. Enable 6 GHz Radio for We enabled 6 GHz radio support for all Pakistan for all Wi-Fi 6E and Wi-Fi 6E and Wi-Fi 7 access points, for Wi-Fi 7 APs Pakistan. Add Brunei for AP410C We added support for AP410C in Brunei. IQ Engine v10.7.5 Release Notes 17 Addressed issues in 10.7.3 Earlier 10.7 Releases Feature ID HOS-21176 HOS-21179 New feature Description Add El Salvador and Trinidad & Tobago for AP5010, AP4000, AP3000 and AP5050D We added support for AP5010, AP4000, AP3000 and AP5050D in El Salvador and Trinidad. Add Algeria for AP305C-WR We added support for AP305C-WR in Algeria. Addressed issues in 10.7.3 Issue ID CFD-9737 (2819337, 02904872) CFD-11024 (02918537) CFD-11961 (02973056) CFD-12216 (02994322) HOS-21270 Description We resolved an issue with Macbook clients unable to connect to 802.1x SSIDs and receiving "could not be joined" errors. We increased the auth timeout for Macbooks. We resolved an issue with the AP5010-WW combining SSIDs in the "show acsp neighbor" list. We resolved an issue where redirection to an external Captive Web Portal using IP firewall redirect rules failed if the Management Options > Disable WebUI without the disable CWP setting was selected. We resolved an issue with the output of "show acsp neighbor" showing incorrect values for the RSSI of neighboring access points. We rolled back the LED behavior to 10.6.6 for the AP5010. The AP LED is solid white, with AT power and up. Slow-blinking white indicates that power is below AT (for example, AF). 18 IQ Engine v10.7.5 Release NotesAntenna House PDF Output Library 7.4.1903